How to disable the DHCP server on SRP547W?

Similar Questions

• Disable the DHCP server on the LAN

  Hello

  I'm working on my first range SRP500 router, I used the 800 series since a certain time for installation on these devices seems a bit basic compared the SRP500 have some very attractive features.

  I seem to be faced with a need to 'simple', I want to disable the DHCP server on the VLAN by default, I already have a DHCP server on the network and wish to continue using it.

  Unfortunately it is not an X to delete this profile, how to remove or disable at least.

  Thank you very much

  Gary

  Hi Gary

  In order to disable DHCP, you must log on as an administrator and then go to-> installation interface-> LAN-> VIRTUAL local network settings

  Click the pencil beside the name VLAN to change.

  Now select the address Type "Static IP address"

  Assign an IP address and the default gateway, subnet mask is not necessary that your router will be the one to share Internet access.

  Please try this and let us know if it worked for you.

• How to disable the DLNA Server?

  Hello

  How can I completely disable the DLNA server in Windows 8? I see how I can do my inaccessible PC with DLNA (i.e. "block all" in streaming media settings), but who doesn't look like he completely turns off the server, or is it?

  I could not find any service named as a UPnP or DLNA server either.

  Thanks in advance!

  You can * probably * accomplish this by turning off the network WMP Service - why
  are you looking for this?
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• RV325, firmware v1.3.1.10, how to disable the PPTP server

  Hello community,

  I have a problem with our RV325. After a reset the PPTP server is enabled by default. Any attempt to save the form in the "PPTP server" settings causes an error as shown in the attached screenshot. I think it's a security issue. Does anyone have an idea how to disable? Pourrait restoration from a manually edited saved startup configuration work?

  EDIT: I managed to block attempts to connect PPTP with the firewall by refusing port 1723, but I still prefer to stop the PPTP server somehow.

  Hello

  I hope you do well, I want to let you know that there are some problems with this version, so it is improved. So I advise you to wait for updated firmware.

  Kind regards

• How to disable the ICS service DHCP part

  Hello

  I have ICS, and I need it from time to time

  How can I disable the DHCP server part?

  Hi John,.

   
  I want to tell you that you can get IE to use a different range. However, there is a configuration unsupported, not tested or proposed by Microsoft. It could cause problems of network on the host, so make a System Restore point before you do.

  Steps to follow:

  
  a. temporarily assign a static IP address to the network connection
  want to share using an address that is not in the 192.168.0.x.

  b. turn on ICS on this network connection.

  c. manually change the IP address of the connection to the local network (home network)
  to a different subnet, as 192.168.1.x.

  d. restoration of the IP address that is appropriate for the shared network connection.

  This unsupported configuration will automatically deactivate the DHCP server that normally runs on the ICS host computer. You will need to assign static IP addresses for all ICS clients.
   
  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• How to disable the product key Windows Server 2008 R2 on Oracle Virtual Box?

  Original title: disable the windows server 2008 r2 key

  I have oracle VM and activated windows server 2008 r2 on a virtual machine. I just VMware workstation God 9 and I would like to reactivate in a VMware virtual machine. How can I disable the key so that it can be reactivated?

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• How to disable the autostart (application) when restarting the server managed?

  Hi Ppl,

  How to disable the autostart (application) when restarting the server managed?

  I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

  I don't find in weblogic.

  Thank you

  You can force stop the application before you restart the server.

  -Faisal

  http://www.WebLogic-wonders.com

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to disable the print in 11.1.2 Reporting Server

  Hello
  
  I need to know if you can help me with "how to disable the print in Reporting (11.1.2) Server?
  
  As this is required for the upgrade (11.1.2-> 11.1.2.1). Sorry for the small Question.
  
  Kind regards
  Kumar

  Yes, it's the process.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to disable the print in Reporting 11.1.2.1 Server

  Hello
  
  I need to know if you can help me with "how to disable the print in Reporting (11.1.2) Server?
  
  As is required for the upgrade of (11.1.2 - 11.1.2.1). Sorry for the small Question.
  
  
  Kind regards
  Kumar

  You must uninstall FRRemovePrintServer.cmd in FinancialReportingStudio\products\financialreporting\install\bin also uninstall Studio FR. You will need to re-install Studio EN and configure the print server after you upgrade to 11.1.2.1

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js

• Keep the IP if the DHCP server is offline now

  We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of NOR?

  If this is not a configurable behavior an alternative could be to have controlelr auto configure to the last known IP if no such is acquired... but the VI apply network settings doesn't seem to work if done on the controller itself. Is this correct?

  With NEITHER in Norway (thanks), I found a solution which allows us to implement the required behavior.

  The main problem for us once we need to override the default behavior for DHCP was the fact that the RT apply target Network Settings.vi does not work if it is set to target the same controller as it is running. So how to exchange between DHCP and fixed? Well, it turns out that the network settings are also stored in the file of ni - rt.ini. So here's what we do: when the controller starts, we check if it is running in DHCP mode. If this isn't the case, we change this in the file nor - rt.ini and the reset - to see if the DHCP server is operational. If the controller is running in DHCP, we check if the IP address is valid (i.e. outside the local range of link). If it isn't read us the last known IP address and write those set in the file nor - rt.ini and restart.

  An example of the sections of the INI file:

  For DHCP, the section of the nor - rt.ini will look like this:

  [TCP_Stack_Config]

  USE_DHCP = DNS_Address

  Gateway USE_DHCP =

  USE_DHCP = Ip_address

  USE_DHCP = Masque_sous

  For a static IP address:

  [TCP_Stack_Config]

  DNS_Address = 0.0.0.0

  Gateway = 10.0.18.1

  Ip_address = 10.0.18.13

  Masque_sous = 255.255.255.128

  It would be nicer than the network RT target apply Settings.vi would work for auto-reconfiguration, but it saved the day for us at least in this case.

• The dhcp server has not seen a directory for authorization server

  I recently upgraded from Server 2003 to windows server 2008 r2. After the upgrade, the DHCP server has started to not giving IP address after a lease has expired. For DHCP to provide IP addresses, I have to restart the server. I need help on how to configure my server to allow the service to restart. Any help will be much appreciated

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Disable the FTP server on the server of the Smart Net Total Care collector?

  Quick and easy question, hopefully: How can I disable the FTP server on the server of the Smart Net Total Care collector? I saw not one obvious way anywhere.

  Thank you!

  Hi Luke,.

  SSH into your collector using the "collectorlogin" username and password. If you have not generated that yet, then SSH as 'admin' and create with the command:

  pwdreset collectorlogin 180

  and save the password it generates. Now SSH for the collector using 'collectorlogin' as username and the password have given it previously.

  Now, enter root:

  Su-

  Now, run the command:

  touch $CSPCHOME/donotStartSyslog $CSPCHOME/donotStartSnmpTrap $CSPCHOME/donotStartFtp $CSPCHOME/donotStartTftp; chown casuser:casusers $CSPCHOME / donot *; chmod $CSPCHOME 710 / donot *; epsc service restart

  Who's going to disable SNMP, FTP and TFTP, interrupts which none are needed by the CSPC and can cause performance problems. After you have created these files, it automatically restarts the service of CPA.

  Thank you

  Lynden