Disable the DHCP server on the LAN
Hello
I'm working on my first range SRP500 router, I used the 800 series since a certain time for installation on these devices seems a bit basic compared the SRP500 have some very attractive features.
I seem to be faced with a need to 'simple', I want to disable the DHCP server on the VLAN by default, I already have a DHCP server on the network and wish to continue using it.
Unfortunately it is not an X to delete this profile, how to remove or disable at least.
Thank you very much
Gary
Hi Gary
In order to disable DHCP, you must log on as an administrator and then go to-> installation interface-> LAN-> VIRTUAL local network settings
Click the pencil beside the name VLAN to change.
Now select the address Type "Static IP address"
Assign an IP address and the default gateway, subnet mask is not necessary that your router will be the one to share Internet access.
Please try this and let us know if it worked for you.
Tags: Cisco Support
Similar Questions
-
Try to disable the LAN on-board Satellite A30 using Ubuntu
Heya,
I'm trying to disable my LAN on Board (Modem) using the bios (F2 on startup) as it is in conflict with my sound card (on ubuntu). However, when I enter the bios, the only options here include the parallel port and power management. Does anyone know how can I disable the modem!
Thank you
Tom
Hello
You want to disable the LAN or modem?
These two devices are not the same!Anyway. If you don't find any option to disable the modem in BIOS it s is not possible!
You may disable these devices in Device Manager in windows operating systems. -
Cisco 527W - how to disable the LAN interfaces
Hi all
Just want to know if there is a way to disable these routers of Cisco 527W LAN interfaces. Looking through the configuration interface, it does not seem an option for this.
Also I have problems to connect to the router via SSH or Telent. When I put the password it says "access denied." But the password works for the web interface...
Thank you...
In my experience, no way at the moment.
Kind regards.
-
Disable the LAN Auto setting troubleshooting
How to disable the automatic connection on my local network?
Hello Paulpadlak,
Are you not wanting your computer to automatically connect to the internet via your local network connection?I don't think there is a way to disable this feature without disabling the NIC completely until you need to use it.You can disable your network adapter in Device Manager: -
At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.
original title: server and virus problemHi SurajMendon,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.
Networking platform
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
How to disable the DHCP server on SRP547W?
Hi, I bought a router SRP547W and I would like to disable DHCP server.
On the Control Panel, I see nothing about disabling this function. I don't need a dhcp server on the router and I do not need dhcp relay.
My firmware version is 1.2.4_003.
Best regards
Luciana
Hello
To disable the DHCP server, jusr change the type of address for your interface VLAN dynamic or - more - static. You can define manally of the local IP address from there.
Kind regards
Andy
-
RVL200 error message: DHCP IP address range into conflict with the LAN IP address
I have a RVL200 (firmware v1.0.12). I use it mainly as a firewall, but also taking advantage of the DHCP server on this subject - at least I thought I was!
When I configured the RVL initially (several years ago), I have it has assigned an address 192.168.0.128 LAN IP and enabled the DHCP server. The DHCP address for the allocation range is 192.168.0.100-. 149. I have not assigned a DNS server address (don't remember why not - maybe - because of the same issue, I'm now face). Since then, whenever I have to appear a new PC on my LAN I put client PC using DHCP to get an IP address... but I need to manually specify the DNS server address (which is logical in the light of what I have described so far).
The question I have now is that I want to assign the DNS server address on the DHCP server on the tab Configuration RVL, so my client DHCP PCs will automatically resume the DNS server address. But when I enter the address of the local DNS (192.168.0.1), the RVL gives me the error message listed above (conflict IP range). I can't understand why...
The "strange thing" I see is the DHCP of the RVL / status tab - at the top of this tab it lists the DHCP server address is 192.168.0.1. This is the address of my DNS server / domain controller. And the IP address of the domain controller is assigned statically (if it matters). So I do not know why the RVL shows the DHCP server or my DNS server / DC, rather than showing his own address de.128. Or why I get this error message when I try to enter the address of the DNS server? Just as an experiment, I also tried entering the other IP addresses, just to see what happens (all on the local subnet)... and they all return the same error message.
Any ideas?
Thanks in advance.
Adam
1. the address LAN IP of the RVL shouldn't be in the DHCP address pool. I guess that causes the error message when you try to change the settings for the DHCP server.
2. I would say that you Flash the latest firmware 1.1.7 on your router. Read the release notes.
-
HP Laserjet M606x: Disable the option 'Print' in the built-in Web server
I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.
The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.
Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.
To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.
-
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
I have (2) AIR-SAP2602I-A-K9, configured the same way.
on two different remote LANs.
They don't seem to be handing out addresses via DHCP.
{If I connect to a local network with another DHCP server}
wireless devices can obtain addresses
This another DHCP server on the LAN through the access point.}
I followed 12.4.25d. JA.cg.pdf
Configuration of the Access Point to provide the Service DHCP 5-22
---------|---------|---------|
e.g. 3444-RCS1-AN #show running-config
Building configuration...
version 15.2
3444-RCS1-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.29.89
IP dhcp RCS1 pool
network 192.168.29.88 255.255.255.248
router by default - 192.168.28.1
Rental 1 0
interface BVI1
IP 192.168.28.211 255.255.254.0
no ip route cache
default IP gateway - 192.168.28.1
---------|---------|---------|
---------|---------|---------|
e.g. 3444-RCS2-AN #show running-config
Building configuration...
version 15.2
3444-RCS2-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.129.81
IP dhcp RCS2 pool
network 192.168.129.80 255.255.255.248
router by default - 192.168.128.1
Rental 2 0
interface BVI1
IP 192.168.128.171 255.255.254.0
no ip route cache
default IP gateway - 192.168.128.1
---------|---------|---------|
Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95
Well this will confuse your customers.
And this is NOT how to set up your "range". See below:
DHCP excluded-address IP 192.168.29.1 192.168.29.87
DHCP excluded-address IP 192.168.29.96 192.168.29.254
IP dhcp RCS1 pool
network 192.168.28.211 255.255.254.0
router by default - 192.168.28.1
Rental 1 0
-
Problem with the DHCP server IP address
Hello
a new installation of LAN, two VSS pair core 6509, 15 closets, with piles of 3750. Floor 15 only, host devices can ping the DHCP server, but cannot acquire IP addresses. not this problem on other floors?
PortFast a dother settings are intact.
your thoughts with be appreciated.
Massoud
Are the trunks will switches closets for the vlan, the DHCP server is in?
Sent by Cisco Support technique iPhone App
-
How to disable the ICS service DHCP part
HelloI have ICS, and I need it from time to time
How can I disable the DHCP server part?Hi John,.
I want to tell you that you can get IE to use a different range. However, there is a configuration unsupported, not tested or proposed by Microsoft. It could cause problems of network on the host, so make a System Restore point before you do.Steps to follow:
a. temporarily assign a static IP address to the network connection
want to share using an address that is not in the 192.168.0.x.b. turn on ICS on this network connection.
c. manually change the IP address of the connection to the local network (home network)
to a different subnet, as 192.168.1.x.d. restoration of the IP address that is appropriate for the shared network connection.
This unsupported configuration will automatically deactivate the DHCP server that normally runs on the ICS host computer. You will need to assign static IP addresses for all ICS clients.Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further. -
AP (1140) is configured as a DHCP server, but the user does not get an IP address
Hello
I just a PA 1140 as standalone AP for the purpose of the investigation on site wireless AP is not attached to any network equipment.
I can't get an IP address after I have configured the AP as a DHCP server.
SW AP version is: c1140-k9w7 - mx.124 - 25d.JA1
Below the output of the show conf:
AP #sho conf
With the help of 1455 on 32768 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
host ap name
!
Pulse 9 logging console
!
No aaa new-model
No dhcp use connected vrf ip
DHCP excluded-address IP 172.16.1.1
!
IP dhcp DHCP pool
network 172.16.1.0 255.255.255.0
default router 172.16.1.1
!
!
dot11 syslog
!
dot11 ssid BTC WiFi SS Kit
open authentication
Comments-mode
!
!
!
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
SSID WiFi SS Kit BTC
!
antenna gain 128
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface Dot11Radio1
no ip address
no ip route cache
Shutdown
gain of antenna 0
no block of dfs
channel SFR
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface GigabitEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
No keepalive
!
interface BVI1
IP 172.16.1.1 255.255.255.0
no ip route cache
!
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
!
Line con 0
line vty 0 4
opening of session
!
end
AP #.
Hello
are you have shown a complete result of the 'see the conf?
I don't see a single relevant command which is to enable a BVI to accept and route routable packets received from its corresponding bridge group:
1 channel ip bridge
I hope this will solve your problem:
conf t
1 channel ip bridge
output
WRI
-
Remote access VPN with ASA 5510 by using the DHCP server
Hello
Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?
I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:
!
ASA Version 8.2 (5)
!
interface Ethernet0/1
nameif inside
security-level 100
IP 10.6.0.12 255.255.254.0
!
IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)
!
Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
!
Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dyn1 1jeu transform-set FirstSet
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap map crypto inside interface
crypto ISAKMP allow inside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
!
VPN-addr-assign aaa
VPN-addr-assign dhcp
!
internal group testgroup strategy
testgroup group policy attributes
DHCP-network-scope 10.6.192.1
enable IPSec-udp
IPSec-udp-port 10000
!
username testlay password * encrypted
!
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
strategy-group-by default testgroup
DHCP-server 10.6.20.3
testgroup group tunnel ipsec-attributes
pre-shared key *.
!
I got following output when I test connect to the ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO
4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048)
, : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740)
, : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80
Kind regards
Lay
For the RADIUS, you need a definition of server-aaa:
Protocol AAA - NPS RADIUS server RADIUS
AAA-server RADIUS NPS (inside) host 10.10.18.12
key *.
authentication port 1812
accounting-port 1813
and tell your tunnel-group for this server:
General-attributes of VPN Tunnel-group
Group-NPS LOCAL RADIUS authentication server
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Can not get the comments DHCP server to allocate addresses on VMNet1 Host-only network
Hi all
Hoping someone can help with this question, here's my virtual machine configuration basis up to now:
-Windows 2012 ADDS, DHCP, DNS server
-Windows XP client
The two guests use the network to host only VMNet1 and DHCP is disabled through work stations.
The problem I have is that my Windows XP computer cannot get a 2012 server DHCP address and she comes back with the link-local address of 169.x. If I configure my Windows XP machine with a static address on the same subnet as the two computers are able to communicate without problem, so I'm not sure where I'm wrong. Wireshark shows the broadcast DHCPDiscover packet, but nothing is returned.
These adapters have certain limits they can treat broadcast packets? Or am I really missing something here?
Any help is greatly appreciated.
Thank you!
Did you check the configuration of your Windows Server 2012 DHCP server? The scope is active? The server is OK?
-
Hi all
Is there a way to disable way permanent Server VI in EXE? Currently I have an EXE generated using the application builder, and the in the ini I can set the server VI to TRUE and the assign the port number to listen on. This poses a security threat to large at my request that anyone using my app can activate the VI server and basically as the hack using the property/invoke nodes - assign values to controls or retrieve values of the indicator.
Ritesh
This means that if you want something solid, use the appropriate tool. I am not convinced that you can get to a shared variable with VI server but if you've tried and done, change your system of protection.
Maybe you are looking for
-
Error code: 0X8DDD0004 (cannot install updates)
[Error number: 0x8DDD0004]
-
HP Deskjet all-in-One Printer - CX027A 2510
Have tried all the troubleshooting availabe and program patches. Will not print black. Download blue grey or very light print. The cartridge is almost full.
-
I have 2 HP pavillion desktop that I lost the x 86 full programs files systems, 1 is a vista I had to reinstall using a set of discs purchased from HP, the other flag I did an upgrade from vista to windows 7. Both are 32-bit operating systems. It's v
-
I'd be in home group or only in the Working Group?
I'd be in home group or only in the Working Group?
-
Exception type: 1F88A3ED family safety
I set up the family safety on my windows laptop 8 without problem. At that time, I used my work e-mail account as my login information from microsoft. I then added a mail alias electronic outlook my live account from microsoft as my primary alias.