How to disable the preview image in the file browser?

Similar Questions

• How to open the file browser window?

  Hello
  
  No idea how to create the file using FLEX browser window?
  
  Thanks in advance
  PRatap

  FileReference.Browse?

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• How to disable the file host Guest service (hgfs.sys) system?

  to disable hgfs, depending on error failure CPP while creating trust relationships between Windows 2003/2008 servers or domain controllers on the Web Vmware site, to change the registry, but could not find hgfs on regietry as it intrudued on my Win 2003 SP2.

  So, how can do?

  Thank you.

  http://communities.VMware.com/message/519830

• In fact, I'm looking for how to disable the discovery network for all profiles (Public, private, domain).

  * Original title: GPO registry key or change

  Hello

  In fact, I'm looking how to disable the network for all profiles (Public, private, domain) discovery and how to disable the file/printer sharing just to the private profile and public with a GPO or a script.

  I ' found some GPO as disable inbound/outbound rules for sharing files/printers and discovery of the network, but I think that a better and more easy solution exists.

  Please can you help me. :)

  Best regards.

  Hello

  According to the description, I understand that you want to disable the discovery network for profiles.

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  https://blogs.technet.Microsoft.com/Networking/2010/12/06/disabling-network-discoverynetwork-resources/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to disable the image previews

  In the windows client there is an option to disable the image previews with

  Tools-> Options-> settings IM-> Show advanced options. Uncheck the option: "show images in conversations".

  In the client Mac there isn't this option. How to disable the image previews in a Mac client?

  OK, found the solution in another thread here: http://community.skype.com/t5/Mac/YouTube-thumbnails-amp-link-previews-Why-don ' t-I-see-them/m-p/39692...

  Menu bar-> display-> display Images-> uncheck

• How to disable the PNG Images

  How to disable the PNG Images?

  PNG is a format for images (compressed) as JPG format. There is no way to disable this format.

  If you have a problem with images on web pages, then you will need to block images from certain domains.

  You can watch the Adblock Plus extension to block specific content.

  • Adblock more: https://addons.mozilla.org/firefox/addon/adblock-plus/

  You must subscribe to a list of filters (for example the EasyList).

  • http://adblockplus.org/en/subscriptions
  • http://adblockplus.org/en/Getting_started

• How to disable the initials (preview) in the mail?

  Anyone know how to disable the e-mail feature that shows a preview of the user in a circle (or initials)? I looked everywhere, but the only solution I found is to know how to remove my photo in my touch to change the preview of my initials.  I don't want that.  I want the circle completely gone.  Someone knows a way to do this?

  There is no way to turn it off.

• How to disable the preview while rendering?

  Hey everybody,

  I would like to know how to disable the preview while AE is rendering as it

  cost of additional resources!

  Thank you in advance!

  Best,

  Alex

  Simply close the viewer of composition before rendering. You can also use the caps lock to repress the screen refresh, but if you want to keep ISO of your PC work, which becomes impractical. Also, note that no refresh will happen, if you simply reduce in the taskbar. It is not as effective as the other two methods, as AE always fills the buffer, even if it is not visible, but should be good enough. And don't be fooled: If your system will not show managers due to errors of memory, turn off the update won't save your behind, either. The result buffer is only a few MB and other expensive operations of memory still occur in the background in memory invisible the program caches.

  Mylenium

• I don't have a message to tell me the image my takes up screen is set to full screen. How to disable the who and the fade slow when he goes to fs?

  In Firefox 42

  When a site like youtube when I make the video fullscreen it just melted slow useless when it does. And then tells me that it is full screen. I know that it is full screen for two reasons. One, I hit the button fullscreen. Two, the video takes up my entire screen. The message point. Use the fade. How can I disable them?

  To disable the fade, you can change these preferences of the topic: config page.

  • full-screen - api .transition - duration.enter: "0 0".
  • full-screen - api .transition - duration.leave: "0 0".

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  I do not know how to disable the warning, but it might be possible to hide this message with code to userChrome.css or elegant.
  This message is displayed for security reasons because a malicious script can switch to full screen mode and take over the entire window without noticing you (i.e. show a fake office).

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• How to disable the Apple Photos

  How to disable the Apple Photos when importing photos (ambient light).

  There are two ways:

  1. When you connect your camera or your iPhone to your Mac and your Photos opens go to the import window and uncheck this box:

  

  However, if you use a device with a memory card and reformat card Photos will think it's another camera and Photos will be open again.

  2. to disable form opening automatically when any camera is attached permanently to Photos, iPhoto or Image Capture paste the command following in the Terminal window, followed by the return key or enter:

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  Change Yes to no reverse the order

  

• How to disable the charms to the point bar Windows 8.1

  I have a new HP laptop with Windows 8.1. I HATE the charms bar. It is very annoying. I have disabled the function of the angle of the bar charms appears is more that if I drag the edges of the corner, however, it pop again randomly. I'll be typing along and it will just pop up, blocking everything I am.

  I have absolutely no need of this bar of charms. In fact, the only thing that I used it for is to get to the option to disable them. However, on this laptop, which is not completely disable them... I tried to go to control panel mouse to turn them off, but this option is not available. However, I don't think it's the mouse pad, forcing them to pop up even when... I'll be typing along, not even touch the carpet of mouse, and all of a sudden they're going to pop up.

  What is the cause of this and how can I get rid of him? I'm getting rather desperate and sometimes feel compelled to throw this laptop out the window! I prefer my laptop HP Windows XP and has replaced only because XP is no longer supported... 8.1 window is one of the most frustrating systems, with that Microsoft has developed.

  Please help me turn off these dang for good things!

  UPDATE: I think I found the solution. I received this link a Microsoft Chat line employee. I followed the instructions and the charms seem to have disappeared... YAHOO...

  Here is the link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  UDATE UPDATE: lol... I posted this below, but repost here... The solution given by the employee of Microsoft Chat line did not work... Well, it worked for a day, I arrested him for the night, and when I turned it on in the morning, the charms were back with a vengeance... Seriously, worse than ever, jumping constantly.  It was as if they were really angry...

  I went to Wally World and bought a $ 16 wireless mouse, which keeps the charm in the Bay... In fact, I think it's easier to use than the mousepad on my laptop anyway. I can use it on the arm of my chair on my laptop beside this mousepad, on a desktop (obviously), but the point being, unless I run the cursor at the very far right of my screen, the charms are hid...

  I have a business Web site, and all working on it, the charms have been constantly popping up as I tried to add images and descriptions. He took me seriously out of my mind... Everything took me twice as long to add, I don't waste time... I worked on it this morning using the wireless mouse and the charms bar jumped not once...

  Thank you Paul, but this link just tells me to do what I've already tried... When I tried to get responses on the Microsoft Windows site, it says that all laptops are different, and I would need to go the manufacturer of my laptop to tell me how to disable... So, I'm here, but nobody seems to know how to stop these things pretty darn... It is really ruining my experience with my new laptop... It's like the use of a laptop being shared with another person who constantly interrupts what I do...

  OPPS... while I was writing that I expect a person on the microsoft online chat to connect so I could ask them how to disable the...

  Rachel from Microsoft came... She sent me this link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  I did what it said to do, and I'm typing this, no charms have jumped at me... Maybe it solves the problem (hope, hope).

• How to disable the touch screen of HP 23-h027c

  My touch screen is sensitive even to small bugs! Living in a tropical island, this is an inconvinience. So I want to disable the touch screen and use the mouse and keyboard only. How to disable the touch screen? Help welcome. Thanks: Pedro [personal information edited by Moderator]

  Enter the device, as shown in the following image Manager right click of the device touch screen and choose disable.

  

• How to disable the built-in PDF Viewer and use another Viewer at all times?

  How to disable the built-in PDF Viewer and use Adobe Reader to view the PDF files, without having to set this preference, whenever I open Firefox? The default setting to "Use Adobe Acrobat (in Firefox)". Thank you.

  It's strange. The integrated Viewer - Viewer by default - is described by the expression 'Preview in Firefox' and you will have changed to "Use Adobe Acrobat (in Firefox)".

  Well... you or an add-on or another program on your system must be changed.

  What happens if you disable the Adobe Acrobat plugin (not the extension to create a PDF file, leave it active). Here's how you can try this:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find "Adobe Acrobat" and change the permission 'never enable '.

  Then in the Options page, Applications Panel, change your preference for "Portable Document Format (PDF)" to "Always ask" so you get the dialog box to download instead of the PDF, open in a tab.

  It sticks?

• How to disable the cc button animate html5 canvas files?

  Hello!

  How to disable the cc button animate html5 canvas files?

  ex:

  this.mc.on('click',function(){alert('this')})
  this.mc.enabled=false
  

  question 1:

  When you click on the 'mc', it always run. How can I control the button of the deactivate and activate?

  question 2:

  The mc is not an image, it's a movieclip. How can I change the colors of the mc? example: default of the mc color red, I want to click change black!

  Thank you!

  use addEventListener instead of 'on '.  You can then use removeEventListener to disable.

  or you can intemperies to use 'on' using the mouseEnabled property to disable this.mc:

  this.mc.mouseEnabled = false;