How to disable the file host Guest service (hgfs.sys) system?

Similar Questions

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• In fact, I'm looking for how to disable the discovery network for all profiles (Public, private, domain).

  * Original title: GPO registry key or change

  Hello

  In fact, I'm looking how to disable the network for all profiles (Public, private, domain) discovery and how to disable the file/printer sharing just to the private profile and public with a GPO or a script.

  I ' found some GPO as disable inbound/outbound rules for sharing files/printers and discovery of the network, but I think that a better and more easy solution exists.

  Please can you help me. :)

  Best regards.

  Hello

  According to the description, I understand that you want to disable the discovery network for profiles.

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  https://blogs.technet.Microsoft.com/Networking/2010/12/06/disabling-network-discoverynetwork-resources/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  Hello

  Enable or disable the guest account the
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files to help!

  I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!

  Hi Shawnmehringer,

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1. have you installed Microsoft Fixit Center on your system?

  2 are. what codec fix you referring?

  3. which files are disabled and you try to activate again?

  If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.

  Microsoft Fix it Center Forums

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• How to disable the cc button animate html5 canvas files?

  Hello!

  How to disable the cc button animate html5 canvas files?

  ex:

  this.mc.on('click',function(){alert('this')})
  this.mc.enabled=false
  

  question 1:

  When you click on the 'mc', it always run. How can I control the button of the deactivate and activate?

  question 2:

  The mc is not an image, it's a movieclip. How can I change the colors of the mc? example: default of the mc color red, I want to click change black!

  Thank you!

  use addEventListener instead of 'on '.  You can then use removeEventListener to disable.

  or you can intemperies to use 'on' using the mouseEnabled property to disable this.mc:

  this.mc.mouseEnabled = false;

• How to disable the feature "send the file as an attachment?

  11.0.13 worm

  How to disable the feature "send the file as an attachment?

  /************************* Hide Menu ********************************/

  Hide the default file > Send file... menu

  app.hideMenuItem ("Email");

• How to remove the file copy unfinished "MyAccount" W2K3 VM or host Win7?

  
  People,

  Hello. I use VM Player 3. The OS is Windows 7 and VM is Windows Server 2003.

  I copy a 22GB file "MyAccount" of VM-W2K3 to Host Win7 because hard disk in Win 7 host have 25 GB. In the copy of the file, a message appears as below:

  "It takes extra 22GB copy your file.

  I click the button CANCEL. But the file has not disappeared. The copy of the incomplete file is still in the machine virtual and busy 22 GB of disk space in W2K3 VM or host wind 7.

  My question is:

  How to remove the file copy unfinished "MyAccount" W2K3 VM or host Win7?

  Thank you.

  People,

  Hello. I found the 22GB "myfoder" file in the directory VMwarDnD on Windows 7 computer host computer. When copy us files from VM to the host, they go to this directory first and then go to the desktop. I deleted a lot of files in this directory to get the amount of disk space.

  The problem is resolved. Thank you.

• How to disable the trace files in the oracle 11g version

  Senario: trace file grow
  How to disable the trace files in the oracle 11g version
  pls guide with best practices

  NATHALIE wrote:
  Senario: trace file grow
  How to disable the trace files in the oracle 11g version
  pls guide with best practices

  11 g, there is an extended tracing which happens for reasons best known only to Oracle. But if you want to disable, Coskan had published a small ticket mentioning a parameter not documented (which means you should think twice before using it) to disable it - disablehealth_check *. Here you can read the full message,
  http://Coskan.WordPress.com/2009/06/03/too-many-trace_file-on-11g/

  Aman...

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to disable the test mode on Windows 7?

  Hello

  I read an article on how to get rid of the test mode on windows 7 and the suggestion was to download fixit from windows.  My problem is that the slider runs constantly and I can't click on anything to start the download.  Any suggestions?

  Hi Mona,.

   
  Thank you for visiting Microsoft Community.
   
  I understand that you have found a water test mode on the Windows 7 computer brand.
   
  Test mode is a mode that aims to install drivers that are not tested.
   
  For several build of windows 7, that this mode and disable this, you can follow the article below:
   
  http://support.Microsoft.com/kb/2509241
   
  To fix the rotating cursor around constantly please follow the suggestions below:
   
  This problem may be caused for the following reasons:
   
  Third-party applications.
   
  Temp folder is full.
   
  1. What is the number of brand and model of the computer?
   
  2 have you recently made any changes to the computer?
   
  To resolve this problem follow the methods below:
   
  Method 1: Clean boot
   
  Put your system to the clean boot state helps determine if
  any third-party applications or startup items are causing the problem. You
  need to follow the steps in the article mentioned below to perform a cleanup
  Boith
   
  How to perform a clean boot in Windows
   
  http://support.Microsoft.com/kb/929135
   
  Note: After troubleshooting, see the section "how to reset the computer to start.
  "normally after a boot minimum troubleshooting.
   
  Use this procedure to disable all the third-party application and Microsoft services will be activated.
   
  Method 2: Disk clean
   
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7
   
  Following this article, you can delete the temporary files that is on the computer.
   

  Additional information:

  How to disable the "Test mode" message that is displayed in Windows

  http://support.Microsoft.com/kb/2509241

  Hope this information helps. For all other windows-related assistance,

  Do not hesitate to contact us and we will be happy to help you.

• How to disable the mac os 10.11.5 user comments?

  Hello world

  I managed to hide from the guest user at startup on my Macbook Pro. But with the last update came back again. Can anyone such me how to disable the guest on mac os 10.11.5 user?

  It is a part of the default value of the OS X system. It lets you allow guest access to the computer that is very limited, thus protecting your data. It is not supposed to be deleted.

  Tip for the disabled guest user appears at startup

  Disable the guest user on Mac OS X Lion login screen 10.7.2 account

  How to disable the guest user | Apple support communities

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• 5102na HP OMEN: how to disable the audio correction Bang &amp; Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• How to disable the icon "power optical drive?

  Hello world
  Anyone know how to disable the taskbar icon "player optical power" or how to disable the service? I don't find in Services, msconfig, not even in parts 3 publishers register Jv16 PowerTools as Cc Cleaner...

  Thank you very much
  Walter

  Hello

  I have the same icon, you can right click on this icon and choose:
  Disable automatic locking optical drive->

  But I don t think it will disappear the taskbar icon.