How to disable the shuffle in-app music?

There is no shuffle button more to switch or repeat.

When you see the album, there is a bar downstairs that has play/pause on three points, the name of the song in the middle with the artist and album info below and the far left to the far right. Tap the song title in the lower bar. It will open up the info for this piece. And on the bottom of the info of the song, you will see the shuffle button that we all know.

Tags: iPhone

Similar Questions

  • How to disable the change in App

    I don't know what to call this 'feature', just guessing. The behavior is: I want to move mail to the Safari. I look for slides Dock Safari and Safari in place. This is sometimes referred to as "barn door transition." The effect I see on my 2011 MacBookAir, it's that I have to slam the slider at the bottom of the screen to activate the Dock. Several apps do not allow activation of Dock at all.

    Small question is: can it be switched to?

    Try to restart the Dock using the following command in Terminal:

    Killall Dock

    Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock.  Move the .db on your desktop.

    Then try a reset of the docking station.

    Applications/Utilities/Terminal enter the command

    Killall Dock

    Log out/in test. If it works fine, delete the .db from the desktop.

    If the dock is the same, back up the .db you, crushing the latest.

    If you prefer to make your library user visible permanently, go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Reprints of Leonie.

  • How to disable the App tabs (tablets should) start automatically?

    How to disable the App tabs (tablets should) start automatically?

    because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

    Please help me!

    Don't bother, I arrived at the solution of my car, you can do the following:

    Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

    If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

    Now to the search bar in the image #3 type: tab and search for it

    preference name:
    

    Browser.sessionstore.restore_pinned_tabs_on_demand

    or you can copy directly to the search bar.
    Then, follow the instructions in the photo n ° 3 .

    Just in case where if the photo appears, follow these steps:

    First: Right-click on the name of the preference that we sought.
    Then, click Toggle to change the value from false to true.
    Or, double-click it and it will change.
    Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

    That's it, good luck to all. ;-)

    Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

    Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

    Additional INFORMATION:

    Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

  • How to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter app

    Regularly I receive notifications of updated Brainiacs Sudoku which I had deleted Ipod Touch 5 g a long time ago.  I can't disable the app update counter until I have download the update.  So, how to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter of the application once and for all?

    Try to hide this purchase

    Hide and show purchases iTunes or iBooks on your Mac or PC - Apple Support

  • How to disable the daily app reviews

    How to disable the daily app reviews

    Please check if this helps: https://forums.adobe.com/thread/1884869?start=0&tstart=0

    Concerning

    Stéphane

  • How to disable the feature CALL SOS?

    I've just updated to iOS 10 and 3 watch OS, but I can't find how to disable the feature of emergency SOS on my Apple Watch.

    I thought it would be a good feature for me so I turned it on, but my fingers are clumsy, so I struck the wrong cursor when I turned off my watch and accidentally, I called 911. I've disabled "Stick to Auto Call" and deleted all my contacts SOS in general in the application to watch on my iPhone and I restarted the iPhone and the Apple Watch, but emergency SOS still shows on my watch when I want to turn off my watch.

    I think that before I turned emergency SOS, I saw "Power Reserve" under the "Power Off". I read that once you turn Hold for Auto call in the app shows and then turn off, the cursor of SOS emergency will always be displayed when you turn off the watch.

    How can I disable the cursor of emergency SOS when I turn off my Apple Watch? Can I use Reset under general, or désapparier my watch and pair again? I don't want to do that, because it would take a lot of time to get all my settings that I want them to be.

    Hello

    I'm not aware of any option settings to remove the emergency SOS cursor in the menu that appears on pressing them and holding the button.

    If you want Apple to consider adding an option to disable the feature, you can submit a request here:

    https://www.Apple.com/feedback/watch.html

  • How to disable the option to find my phone, if I phone 4S dead?

    How to disable the option to find my phone, if I have Iphone 4S dead? I turned on Itunes and I wanted to restore it, but it's impossible because I find my iphone app is on. Synchronization is impossible

    If the iPhone is dead, how do you plan on catering?

    You can disable FindMyiPhone by logging iCloud.com.

    -> iCloud: remove your device to find my iPhone

  • 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

    Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

    I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

    1. Go to the Windows Device Manager > sound, video and game controllers section.
    2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
    3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
    4. Right click and select Update driver software.
    5. Select Browse my computer for driver software.
    6. Select Let me pick from a list of drivers for devices on my computer.
    7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
    8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
    9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
    10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
    11. When prompted to restart, click Yes.
    12. Now enjoy your music with no compression!

    Thanks to SteveCT99

    This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

    HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

    The current driver is default.

  • How to disable the vibration

    Hi all

    I want to ask questions about how to disable the vibration. I manually disable in Whatsapp and Message but still - it vibrates.

    someone knows how to fix this?

    Do not disturb the name for mode I was talking about, is not silent. Sorry for the confusion.

    Do not disturb mode, that the phone does not vibrate or play any sound when you receive notifications until the output don't bother, unless you add some exceptions. You can learn more on this subject on our Web site: http://support.sonymobile.com/global-en/xperiaz5/userguide/Sound-ringtone-and-volume/

    So in short, if you don't want any noise or vibration for notifications, you can put your phone do not disturb mode. If you want to disable it for only certain applications, you will need to look for a setting in the application itself. If this setting is not working properly you can try to reinstall the application in question and if it doesn't help you should reach to the developer of the application. If you can't find a support section in the application itself, you should be able to find some contact information on the page of the app owner in the game of Google.

  • How to remove the version of app on appworld supplier portal and do not delete the whole product?

    Hello
    How to remove the version of app on appworld supplier portal and do not delete the whole product?
    I added some changes in my verion 3,0,0 App and send it to stable appworld and it pass the process but now
    I want to go back to the previous version (2,4,8), but not remove any product from the store.

    I can't remove the store version, but only to remove any product.

    You cannot delete a version, but you can ask RIM to do it for you
    https://www.BlackBerry.com/profile/?EventID=8109

    If your application is a smartphone application there is a workaround 'disable' release, simply edit the supported devices and leave only one device (e.g. 8800), in this way, no users will be able to download this version.

  • How to play audio CDs in-app music?

    How to play audio CDs in-app music?

    Hello

    The music app does not support playback of CD audio.  To read your CD, you can use Windows Media Player.

    You can also use Windows Media Player to rip or copy the music from the CD to your hard drive and then play them in the application music.  You can find the steps to rip a CD here.

  • How to disable the autostart (application) when restarting the server managed?

    Hi Ppl,

    How to disable the autostart (application) when restarting the server managed?

    I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

    I don't find in weblogic.

    Thank you

    You can force stop the application before you restart the server.

    -Faisal

    http://www.WebLogic-wonders.com

  • How to disable the menu using JS?

    Hello.

    I have add menu with the help of JS.

    I want to disable an added menu item.

    But the active menu option is read only.

    App.menus.Item("$ID/main"). Submenus.Item ("MyTestMenu").menuItems.item ("My Menu Item 2"). enabled = false;

    How to disable the menu value?

    Thank you.

    Hi K159,.

    It's only the ScriptMenuAction.enabled property is rewritable. This prevents the script layer interfere with regular InDesign menu items.

    So, in light of your custom object of MenuItem (myMenuItem), his associatedMenuAction should refer to a ScriptMenuAction which can be turned off:

    myMenuItem.associatedMenuAction.enabled = false;

    This translates by disabling the menu option as well.

    @+

    Marc

  • How to disable the feature "send the file as an attachment?

    11.0.13 worm

    How to disable the feature "send the file as an attachment?

    /************************* Hide Menu ********************************/

    Hide the default file > Send file... menu

    app.hideMenuItem ("Email");

  • 230 portable x - how to disable the touchpad Windows 8 gestures

    no idea how I can stop the touchpad to launch Windows 8 charms bar when there is a hit on the right side of the touchpad?  In addition, drag from left to right on the left side of the touchpad app switching begins.  It is a pain that working me inside an application (e.g. web browser) using the touchpad I will accidentally move apps frequently.  How I disabled?  I could not find a setting in the ultranav software provided with the laptop.

    In case anyone wants to know, here's how to disable the functionality of Windows 8 landslide:

    You must change the following registry keys to the following:

    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge sweater]
    "ActionType" = DWORD: 00000000
    [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Left Edge sweater]
    "ActionType" = DWORD: 00000000
    [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge traction extended area]
    "ActionType" = DWORD: 00000000
    [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Top Edge sweater]
    "ActionType" = DWORD: 00000000

Maybe you are looking for