How to display a BLOB (Image) in a report of the EBS?

Similar Questions

• How to display on my screen 2 different applications at the same time?

  How to display on my screen 2 different applications at the same time?

  Hello

  The best place to ask would be the forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =====================

  If you have Windows 7 with Aero - click with the right button on the taskbar at the bottom of the screen and click on 'show windows '.
  Side by Side.

  For all versions of Windows:

  You could also reduce less than full screen using the small box to the left of the red X at the top right
  and then resizing windows as you want.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to display a hidden shortcut that is pinned to the Start Menu?

  HIDDEN PIN TO THE MENU SHORTCUT START

  How to display a hidden shortcut that is pinned to the Start Menu? This problem occurs very simply but does not quite simply. I've pinned a shortcut to the Start Menu before you uncheck the hidden attribute (knew I had) causing the shortcut to be recorded without being visible. When I tried to pin it again I was alerted to his presence by the fact that the second pinning made an extension of title (2). When I tried to change the title, I received the message that a link of this title was already present. I don't want to stay as a situation lasting this is why I need instructions on how to change it. I could just change the title of the second pinning something close but different but then I would have two shortcuts to the same program pinned on my Start Menu, without being able to be removed. I just * because if I can tell. I could uninstall the program and then run another program looking for broken shortcuts to 'fix' and then (I guess that means deletion when they can't be 'fixed') but I would like to avoid the extra steps for pedestrians to the advantage of learning a new technique of Windows if such jurisdiction exists. Could use this help as soon as POSSIBLE. Thank you.

  C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\StartMenu

  Just tested myself and my shortcut is there.

• How can I restore all images in a collection at the original imported proportions?

  In general, I select all images in a catalog, resize the first image to 640 x 480.  I then right click on the first image (all images are always selected) click settings to develop, sync and choose to sync only the proportions.  All images are then cut to 640 x 480 as the first picture, that I then export to a folder.

  Then I need to restore all the images in the original proportions for creating a slide show export to my Web site.  I followed the same procedure is selected all the images, click on the first image, change the original appearance, right click on the first picture and sync proportions for all images.

  The problem is that the rest images do not return to their original proportions, but return to the aspect ratio of 4 x 6 instead of the original size when they are imported.  I changed the lock open and tried both but still no result.  Now I have to select each image individually, open the dialog of cultures and choose custom to retrieve for the imported image format.

  How do I batch restore images from a collection to the image format when imported?

  I see, it is something you do at the end of your treatment, for the slide show to a Web site special... maybe you said it at the beginning, but I respond by e-mail and don't see any of these messages.

  In any case, what you can do is to export all your images with their existing to a subfolder (original) aspect ratio, somewhere and add those to the library using the parameter to the top near where you set the directory put them in, and then set a harvest of 4:3 on these imported JPGs and their re-export in 640 x 480 for the RMLS site.  If it is a unique thing for each collection, you could easily just delete both sets of jpg files to your library and the drive to keep the use of extra space, or at least those intermediate.  As you said, that it was a collection, perhaps from different folders, but if they all come from the same folder, to make the JPGs intermediaries and the jpg final 640 x 480 as subdirectories in the original in order to better RAWs keep track of them.

• How to display a .swf image when the film is disabled?

  I wonder how to display an image or a swf image when the film is not play. Any information appreciated. Thank you!

  A swf is never really off if it is displayed. But if you want something to show when there is nothing going on in the file, then just do sit in a frame with any content you intend to display.

• How to display correct sRGB images in applications unmanaged Vista with a wide range of display?

  Hi all

  This isn't a simple question, and I don't expect the answers to be simple either.

  1. I have vista home premium
  2. I have a wide range of LCD, a screen with a significantly wider than the sRGB color profile (sometimes incorrectly called a display Adobe RGB)
  3. I have it calibrated with a Spyder3Elite
  4. Images look GREAT in color managed applications (including the windows photo gallery)
  5. Photos have air saturated outside color management applications, even if they are sRGB images.

  Here's what I need.  If an application is not color management then Vista should apply the sRGB profile AND map it on my monitor profile.

  What is happening now is the image is mapped directly to the color space of the monitor and let the oversaturated colors. The end result is that all images within windows and Internet Explorer are saturated. The only solution for navigation is to use a plugin to make the management of the colours of firefox or use safari.

  BTW. Even if windows photo gallery is the color of the slide show management is not argghhh.

  I have looked at the Advanced tab on the Vista color management, but did not find ANY documentation on the 'device profile' or 'View profile status' settings. They seem to be associated with what I need, but there is nothing in the help about it. What do mean? second question, sorry)

  Concerning
  JzE

  PS. I checked the color management using the 4 images at http://www.color.org/version4html.xalter. I have saved their drive and use them as a reference to quickly check if an application is successful or not color.

  I received this reply from Michael Bourgoin. Thank you, Michael, we now have at least one answer...

  Hi J___,.

  I wish I could give you some good news, but the fact is that most of the components of windows and the Windows desktop are always not color management. The Windows Photo Gallery and Windows Live Photo Gallery are the only elements of the Windows color reach the display profile. Most office applications will honor profiles embedded in images, source but then they convert to sRGB and throw it on the screen. And IE is not even honor profiles embedded in images...

  That you have determined, the settings in the color management control panel affect only the applications of color management. The settings in the tab Cpl Advanced CM are used to provide default values for the missing profiles needed for the creation of color transformation for WCS in color management applications. Again not to help.

  Regarding the application non-management of color management color "behind their backs" goes, it's very difficult to do in general. There is no easy way for the OS to tell if the color data that renders an application has already been color managed, or not.

  We have a technology called high color which will be in Windows 7 that aims to solve this problem. Color high-definition given color are first converted into a color space extended which uses the sRGB primaries, but which allows the values less than 0.0 and 1.0 above (let's call it sRGB-XR). Colourful is closely related to xvYCC and X.v.color of Sony. Range wide color data can be converted in this space with no loss. Displays (and maps) that support colourful are necessary to convert this space sRGB-XR internally to their native color space. With color high definition, the United Nations - RGB color management is treated as sRGB, which is unchanged when converted to sRGB-XR space (it's all in the [0.1] part of the encoding). But then peripheral compatible High Color will map correctly that in their native space, so the sRGB data never get oversaturated in being treated as if she was already in wide range native of screen space (as happens now). And any image content real wide range gets correctly mapped to take advantage of the wide range of the screen. The plumbing for High Color is under Windows 7. However, the Desktop Window Manager could not implement a high color support in time (this requires the use of a fixed or floating point rendering surface), if the Bureau will not use color high definition, however, in Win7. Maybe the next time.

  I would like to be able to give more excuses, explanations and communities.

  Best regards

  Michael Bourgoin
  Program Manager | Experience Windows & Imaging Team color
  Microsoft Corporation

• How can I force an image to open completely on the screen in action?

  In PS CS5 when I open an image with height in the range of 1405-1411 or 1873-1882, the image opens half of the bottom of the screen.  Width opts seem to matter.

  I guess it's a bug, but until it is fixed, I'm trying to work around.

  For manual fitting the vertical adjustment button or zoom out screen causes the image to the screen lights up but neither of these options will save in an action to display.

  When an image is opened halfway off the screen, Place a command place precisely for these images.  So an action that includes a place does not work for these images.

  So either I want to find an arrangement (Nothing in preferences that I can find) to force the image open to the screen, or find a command that runs in an action that activates the picture to come on the screen, while not interefering with images that open normally.

  You can use Insert a Menu item (the Launcher to the Panel menu actions) to record something like view > fit to the screen, but what you describe should not be the case.

  You are using tabs or floating documents?

  Have you tried resetting preferences cs5?

  http://forums.Adobe.com/thread/375776?TSTART=0

  Maybe you could post a screenshot showing how the image opens.

• How can I place an image in a report without getting pixelated

  Hello

  I create a my program using NIReport report. In my report, I have graphics and images that are placed in the report. My current method uses a bitmap to take a screenshot of the active view of a control, and then using this bitmap to create a JPEG file and add that file to the report. However, graphics and pictures are very blurry and pixelated. Is there another way to add a picture or graphic to the report?

  The nirconvertsample.cws example seems to have images in the table for NIReport. You can dig through this code example to see how they do.

• Display data BLOB (image) in BI Publisher report - E-Business Suite R12

  Hi all
  
  As part of the upgrade of the E-Business Suite R12.1.3, I need to develop a report printed in. using MS Word BI Publisher Desktop Plugin. The report must include pictures (signatures) of the resulting database of approvers of requisition.
  
  How can I create a custom view and a model to use with a RTF report and include dynamic images? Is this possible?
  
  Thank you
  Sinan

  Yes, it is possible

  Watch the BLOBs to insert in your report

  steps to follow:
  -create with the query with blob data definition (say image) in xmlp
  -create the empty template and load it into an RESP xmlp
  -create a simultaneous
  -concurrently
  -Save the xml
  -use of BI Publisher Desktop with to build xml data model presentation
  -disposition of load to xmlp RESP model

  Another way
  -If os image, you can try using OA_MEDIA + name of the image
  -mos: how to insert Images and BLOB objects dynamically in the Word template or Document? [443957.1 ID]

• Should how to display my thumbnail image I choose?

  I have a mySql database with a few of many records for each of my images. One of the data fields is thumbnail url: I want to view all the thumbnails on the screen.

  It is best to do A or B:

  A

  Use a datagrid control and a custom converter to display each image

  or B

  get all the data in a table, browse and view thumbnails on the screen.

  all advice is appreciated, I already had the url string thumbnails appear in the data grid, but how do I get the actual thumbnail to appear instead?

  Your TileList might look like this:

  Then in a script block, you can have a function like this:

  private void setImages(thumbnailURLs:ArrayCollection): void {}

  var ac:ArrayCollection = new ArrayColleciton();
  for each {(var URL: String en thumbnailURLs)}
  var image: Image = new Image();
  image.source = URL;

  ac.addItem (image);
  }

  _myImages = ac;
  }

  with a variable like this:

  [Bindable]
  private var _myImages:ArrayCollection = new ArrayCollection();

  Hope this helps,

  T.K.

• How to display raw pictures images

  How can I view my photos in "raw" format to change. The only version I see on the photographs is jpg, but the photos have been taken in raw.

  Are you shooting RAW only or RAW and JPEG

  If you are shooting RAW so you see the RAW because it's all it is - if you pull them both (and you have to wonder why not just take a you want and save space) then in edit mode under the image menu, click on use RAW as the original

  LN

• How to display a PNG image according to the response from the Web Service?

  Hello

  I use the web service XML from Weather.com to get the current temperature, temperature 'feels' and the current condition icon number.  Their service provides many (> 20 I think) which represents the current status of PNG files.  How do I install my script AS3 do basically if... then Else instructions based on the returned value icon?  For example, if the value of icon = 20, then view 20. png on stage?  I need match the value of correct PNG icon and then put that PNG (as a clip?) on stage for a predefined timeline section.

  Thank you

  SID

  Hello

  I also used this API, and I only use cases or conditions in order to retrieve the values and turn them into a file name.

  If you do not use all the available conditions and turning them into an icon, then Yes, you need to do a switch condition.

  But if you want to use them all, them you can simply get the condition number and add the '.png' and call the corresponding file directly. Here you can do a test, just in case the condition / icon does not exist (e.g. system failure any)

  uicondition.source = String (resultXML.cc.icon) + ".png";

  The UILoader is an excellent component for this sort of thing. You can accomplish the same thing with a MovieClip and load an image. It is lighter.

  But then again if you want to resize you would code all methods for that.

  I hope this helps.

• How to display a hidden Image?

  Hi all

  I have a form where there are several images that are hidden and excluded from the page layout. There are several checkboxes are present. If certain conditions are met (a particular box is checked) then it should display the image. I have a design that the Images are not associated with scripts.

  Is this wrong? any help on this would be appreciated.

  Thank you.

  Sidonie.

  Hi Francine,.

  No, it is completely available in FormCalc, you just need to change the syntax.

  In FormCalc, it would look like:

  if ($ == "1") then
       image1.presence = "visible"
  else
       image1.presence = "hidden"
  endif
  

  Hope that helps,

  Niall

• Help them understand how to display a raster image

  Hello.
  
  I apologize in advance if this sounds a bit complicated issue, but I'm a little confused as to how to go about it.
  
  I have an Ascii-grid file exported from ArcMap and I want to draw on a JPanel.
  This particular grid is a DEM, but it would be good if it could produce this for any network, if it makes a difference.
  The problem is I don't really even know where to begin... I looked at using templates, buffers of data, etc. for the creation of a frame, but I don't really know how to enter the ascii data that I have in one of these.
  Can I remove the integer values pixel data in the file before etc and if so how can I go about it?
  
  Also is it possible to do a color model of an int array standard, if it was created in a particular model, for example to the designated height values.
  
  Help to identify the ways to go about this would be very welcome because I am lost about what to do. Even just a few tips in the right direction. I'm more that happy to go work it out I really don't know where to start.
  See you soon.

  Sounds something like a map of contours. I don't know there must be a technically superior (read: horribly complicated) way to do this, use IndexColorModel, WriteableRaster etc etc, but if performance is satisfactory, I would go with a simple BufferedImage and setRGB.

  import java.awt.Color;
  import java.awt.image.BufferedImage;
  import javax.swing.*;
  
  public class ContourMap {
  
    private int[] colors = {
      Color.BLACK.getRGB(),
      Color.GREEN.getRGB(),
      Color.YELLOW.getRGB(),
      Color.RED.getRGB()
    };
  
    public static void main(String[] args) {
      SwingUtilities.invokeLater(new Runnable() {
  
        @Override
        public void run() {
          new ContourMap().makeUI();
        }
      });
    }
  
    public void makeUI() {
      String[] strData = {
        "000000000000000",
        "000000111000000",
        "000111221110000",
        "001112222111000",
        "001122332211000",
        "001112222111000",
        "000111221110000",
        "000000111000000",
        "000000000000000"
      };
      BufferedImage image = new BufferedImage(strData.length, strData[0].length(),
              BufferedImage.TYPE_INT_ARGB);
      for (int i = 0; i < strData.length; i++) {
        for (int j = 0; j < strData[0].length(); j++) {
          image.setRGB(i, j, colors[strData.charAt(j) - '0']);}System.out.println();}JLabel label = new JLabel(new ImageIcon(image), JLabel.CENTER);
  
  JFrame frame = new JFrame();frame.add(label);
  
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);frame.setSize(200, 200);frame.setLocationRelativeTo(null);frame.setVisible(true);}}db
  
  edit And oh, the data is in a hardcoded String array only because I couldn't be bothered adding all the commas to make it a int[][] after copying from your post
  
  Edited by: Darryl Burke 
  

• How to display wav on a table or chart, if the user enters frequency, amplitude, shape, offset

  Hello

  I have a program (an example of program) where the user can enter the frequency, amplitude, shape as well as the compensation of a wave. How to take these properties and in the wiring diagram to display the waveform on the front panel (in a table or a graph)?

  Frequency, amplitude and offset is a double. Waveform in the wave function of type.

  code attached.

  Please answer. Thank you.

  To see the actual waveform, you obviously have another instrument connected to the output of the Agilent. If you want something simulated as closely as possible, you can wire the wave to a case statement function and set a function of generation of waveform appropriate inside each case.

  Edit - you also posted to the wrong Board. In the future, don't forget to post on the instrument (approximately Agilent) control or Council of LabVIEW (regarding the functions of generation of waveform).