How to display a hidden Image?

Similar Questions

• Smartphones blackBerry how to display the hidden images?

  OK so I've hidden some photos on my phone and now I can not find them I tried to explore media and click hidden but I stil can't find them.

  You hide THIS folder? If then... this file is THIS folder? Menu > show hidden.

  You can always connect via the USB port of your PC > open plug media on your "My Computer" and find the files. ON each of them, or in the hidden folder, do a right click on it > properties > and uncheck the hidden attribute.

• How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

  

  Hope you can help in this case...

  It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

  Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

• How to display a hidden shortcut that is pinned to the Start Menu?

  HIDDEN PIN TO THE MENU SHORTCUT START

  How to display a hidden shortcut that is pinned to the Start Menu? This problem occurs very simply but does not quite simply. I've pinned a shortcut to the Start Menu before you uncheck the hidden attribute (knew I had) causing the shortcut to be recorded without being visible. When I tried to pin it again I was alerted to his presence by the fact that the second pinning made an extension of title (2). When I tried to change the title, I received the message that a link of this title was already present. I don't want to stay as a situation lasting this is why I need instructions on how to change it. I could just change the title of the second pinning something close but different but then I would have two shortcuts to the same program pinned on my Start Menu, without being able to be removed. I just * because if I can tell. I could uninstall the program and then run another program looking for broken shortcuts to 'fix' and then (I guess that means deletion when they can't be 'fixed') but I would like to avoid the extra steps for pedestrians to the advantage of learning a new technique of Windows if such jurisdiction exists. Could use this help as soon as POSSIBLE. Thank you.

  C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\StartMenu

  Just tested myself and my shortcut is there.

• How to display a .swf image when the film is disabled?

  I wonder how to display an image or a swf image when the film is not play. Any information appreciated. Thank you!

  A swf is never really off if it is displayed. But if you want something to show when there is nothing going on in the file, then just do sit in a frame with any content you intend to display.

• How to display a BLOB (Image) in a report of the EBS?

  User has requested to add a Logo image to a report called the E-Business Suite (EBS).
  
  The image is currently stores in a BLOB column.
  
  How can I make the image to display in the report?
  
  Thank you!

  I don't see why it wouldn't work on Unix. Each element in the layout is a source based on a column in your query (in the datamodel). It doesn't matter if it's Windows or Unix.

  Reports done automatically if you use the wizard. If you change an existing report, you need to add the column (in the datamodel) and element (in the layout) yourself.

• How to display the loading Image when you press a first level tab

  I have a long report which is directly related to a first level tab and want to display an image that makes the user aware that the application is running and load the data.
  
  Tried to use the plugin loading of Tobias Arnold icon, but it does not occur under this type of event.
  
  No idea how to use this plugin with a tab without submitting the page.
  
  Jeff

  23 theme is OK, the class = attribute "tab_link" on the tabs. I added that and now it works.

• Should how to display my thumbnail image I choose?

  I have a mySql database with a few of many records for each of my images. One of the data fields is thumbnail url: I want to view all the thumbnails on the screen.

  It is best to do A or B:

  A

  Use a datagrid control and a custom converter to display each image

  or B

  get all the data in a table, browse and view thumbnails on the screen.

  all advice is appreciated, I already had the url string thumbnails appear in the data grid, but how do I get the actual thumbnail to appear instead?

  Your TileList might look like this:

  Then in a script block, you can have a function like this:

  private void setImages(thumbnailURLs:ArrayCollection): void {}

  var ac:ArrayCollection = new ArrayColleciton();
  for each {(var URL: String en thumbnailURLs)}
  var image: Image = new Image();
  image.source = URL;

  ac.addItem (image);
  }

  _myImages = ac;
  }

  with a variable like this:

  [Bindable]
  private var _myImages:ArrayCollection = new ArrayCollection();

  Hope this helps,

  T.K.

• How to display raw pictures images

  How can I view my photos in "raw" format to change. The only version I see on the photographs is jpg, but the photos have been taken in raw.

  Are you shooting RAW only or RAW and JPEG

  If you are shooting RAW so you see the RAW because it's all it is - if you pull them both (and you have to wonder why not just take a you want and save space) then in edit mode under the image menu, click on use RAW as the original

  LN

• How to display correct sRGB images in applications unmanaged Vista with a wide range of display?

  Hi all

  This isn't a simple question, and I don't expect the answers to be simple either.

  1. I have vista home premium
  2. I have a wide range of LCD, a screen with a significantly wider than the sRGB color profile (sometimes incorrectly called a display Adobe RGB)
  3. I have it calibrated with a Spyder3Elite
  4. Images look GREAT in color managed applications (including the windows photo gallery)
  5. Photos have air saturated outside color management applications, even if they are sRGB images.

  Here's what I need.  If an application is not color management then Vista should apply the sRGB profile AND map it on my monitor profile.

  What is happening now is the image is mapped directly to the color space of the monitor and let the oversaturated colors. The end result is that all images within windows and Internet Explorer are saturated. The only solution for navigation is to use a plugin to make the management of the colours of firefox or use safari.

  BTW. Even if windows photo gallery is the color of the slide show management is not argghhh.

  I have looked at the Advanced tab on the Vista color management, but did not find ANY documentation on the 'device profile' or 'View profile status' settings. They seem to be associated with what I need, but there is nothing in the help about it. What do mean? second question, sorry)

  Concerning
  JzE

  PS. I checked the color management using the 4 images at http://www.color.org/version4html.xalter. I have saved their drive and use them as a reference to quickly check if an application is successful or not color.

  I received this reply from Michael Bourgoin. Thank you, Michael, we now have at least one answer...

  Hi J___,.

  I wish I could give you some good news, but the fact is that most of the components of windows and the Windows desktop are always not color management. The Windows Photo Gallery and Windows Live Photo Gallery are the only elements of the Windows color reach the display profile. Most office applications will honor profiles embedded in images, source but then they convert to sRGB and throw it on the screen. And IE is not even honor profiles embedded in images...

  That you have determined, the settings in the color management control panel affect only the applications of color management. The settings in the tab Cpl Advanced CM are used to provide default values for the missing profiles needed for the creation of color transformation for WCS in color management applications. Again not to help.

  Regarding the application non-management of color management color "behind their backs" goes, it's very difficult to do in general. There is no easy way for the OS to tell if the color data that renders an application has already been color managed, or not.

  We have a technology called high color which will be in Windows 7 that aims to solve this problem. Color high-definition given color are first converted into a color space extended which uses the sRGB primaries, but which allows the values less than 0.0 and 1.0 above (let's call it sRGB-XR). Colourful is closely related to xvYCC and X.v.color of Sony. Range wide color data can be converted in this space with no loss. Displays (and maps) that support colourful are necessary to convert this space sRGB-XR internally to their native color space. With color high definition, the United Nations - RGB color management is treated as sRGB, which is unchanged when converted to sRGB-XR space (it's all in the [0.1] part of the encoding). But then peripheral compatible High Color will map correctly that in their native space, so the sRGB data never get oversaturated in being treated as if she was already in wide range native of screen space (as happens now). And any image content real wide range gets correctly mapped to take advantage of the wide range of the screen. The plumbing for High Color is under Windows 7. However, the Desktop Window Manager could not implement a high color support in time (this requires the use of a fixed or floating point rendering surface), if the Bureau will not use color high definition, however, in Win7. Maybe the next time.

  I would like to be able to give more excuses, explanations and communities.

  Best regards

  Michael Bourgoin
  Program Manager | Experience Windows & Imaging Team color
  Microsoft Corporation

• How to display a hidden user account?

  hidden user account

  I discovered a hidden on my computer user account. I never saw him until what I went to parental controls in Control Panel. It's the only place wherever I can get it to appear. "UpdatusUser" is the name of accounts. How make it unhidden so I can see what are the benefits and remove it?

  Open your ongoing departure run.ext (windows key + r) registry editor, and then type regedit. Then, follow the steps below.
  1. Run the registry editor (RegEdit.exe).
  2. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList
  -Here is a picture: mydigitallife.info/wp-content/uploads/2009/02/userlist.jpg
  1. Select UserListand in the right pane, right-click on any empty space, and then tap New -> DWORD (32-bit) value.
  2. Name the new DWORD registry value as name exactly the that same name that match the user account name to be hidden.

     For example, if the user ID of the user account John, the name of the registry as John value.

  3. Double-click the DWORD registry value and set data of 1 in the oder to hide the account from the Welcome screen.
  4. Exit Registry Editor.
  5. Log off or restart the computer for the changes to take effect.

  Tip: In order to log in Windows by using a user account that has been hidden and invisible, just press Ctrl + Alt + Delete to bring up the Windows logon dialog box and manually type in the user name and password.

  Credit to: mydigitallife.info

• How to display a PNG image according to the response from the Web Service?

  Hello

  I use the web service XML from Weather.com to get the current temperature, temperature 'feels' and the current condition icon number.  Their service provides many (> 20 I think) which represents the current status of PNG files.  How do I install my script AS3 do basically if... then Else instructions based on the returned value icon?  For example, if the value of icon = 20, then view 20. png on stage?  I need match the value of correct PNG icon and then put that PNG (as a clip?) on stage for a predefined timeline section.

  Thank you

  SID

  Hello

  I also used this API, and I only use cases or conditions in order to retrieve the values and turn them into a file name.

  If you do not use all the available conditions and turning them into an icon, then Yes, you need to do a switch condition.

  But if you want to use them all, them you can simply get the condition number and add the '.png' and call the corresponding file directly. Here you can do a test, just in case the condition / icon does not exist (e.g. system failure any)

  uicondition.source = String (resultXML.cc.icon) + ".png";

  The UILoader is an excellent component for this sort of thing. You can accomplish the same thing with a MovieClip and load an image. It is lighter.

  But then again if you want to resize you would code all methods for that.

  I hope this helps.

• Help them understand how to display a raster image

  Hello.
  
  I apologize in advance if this sounds a bit complicated issue, but I'm a little confused as to how to go about it.
  
  I have an Ascii-grid file exported from ArcMap and I want to draw on a JPanel.
  This particular grid is a DEM, but it would be good if it could produce this for any network, if it makes a difference.
  The problem is I don't really even know where to begin... I looked at using templates, buffers of data, etc. for the creation of a frame, but I don't really know how to enter the ascii data that I have in one of these.
  Can I remove the integer values pixel data in the file before etc and if so how can I go about it?
  
  Also is it possible to do a color model of an int array standard, if it was created in a particular model, for example to the designated height values.
  
  Help to identify the ways to go about this would be very welcome because I am lost about what to do. Even just a few tips in the right direction. I'm more that happy to go work it out I really don't know where to start.
  See you soon.

  Sounds something like a map of contours. I don't know there must be a technically superior (read: horribly complicated) way to do this, use IndexColorModel, WriteableRaster etc etc, but if performance is satisfactory, I would go with a simple BufferedImage and setRGB.

  import java.awt.Color;
  import java.awt.image.BufferedImage;
  import javax.swing.*;
  
  public class ContourMap {
  
    private int[] colors = {
      Color.BLACK.getRGB(),
      Color.GREEN.getRGB(),
      Color.YELLOW.getRGB(),
      Color.RED.getRGB()
    };
  
    public static void main(String[] args) {
      SwingUtilities.invokeLater(new Runnable() {
  
        @Override
        public void run() {
          new ContourMap().makeUI();
        }
      });
    }
  
    public void makeUI() {
      String[] strData = {
        "000000000000000",
        "000000111000000",
        "000111221110000",
        "001112222111000",
        "001122332211000",
        "001112222111000",
        "000111221110000",
        "000000111000000",
        "000000000000000"
      };
      BufferedImage image = new BufferedImage(strData.length, strData[0].length(),
              BufferedImage.TYPE_INT_ARGB);
      for (int i = 0; i < strData.length; i++) {
        for (int j = 0; j < strData[0].length(); j++) {
          image.setRGB(i, j, colors[strData.charAt(j) - '0']);}System.out.println();}JLabel label = new JLabel(new ImageIcon(image), JLabel.CENTER);
  
  JFrame frame = new JFrame();frame.add(label);
  
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);frame.setSize(200, 200);frame.setLocationRelativeTo(null);frame.setVisible(true);}}db
  
  edit And oh, the data is in a hardcoded String array only because I couldn't be bothered adding all the commas to make it a int[][] after copying from your post
  
  Edited by: Darryl Burke 
  

• When I get out of Firefox, he claims to have a tab open to display. How to display the hidden tabs?

  So far, the only way I've found is to wait for the browser stops responding and then when he asked me to restore the session can I see and close a marked as "Sandbox". I tried ctrl + 1-8 and he didn't show.

  I had the same problem.
  I did a search through my modules, then
  disabled "Download Youtube videos to mp4" (version 1.7.18)
  That solved the problem.

  Hop, I helped you.

• How to display the hidden in firefox 10.0.2?

  Not a probem in my previous version on pc ld!

  See also these extensions:

  • CacheViewer suite: https://addons.mozilla.org/firefox/addon/cacheviewer-continued/
  • CacheViewer Fx6: https://addons.mozilla.org/firefox/addon/cacheviewer-fx4/ (Windows)