How to display a SQLITE database being created

Similar Questions

• Is it possible to display the SQLite database?

  I can debug my app on my Playbook, but is it possible to display the SQLite database? I want to confirm it works.

  If you can recover on your PC/Mac, I use "Lita" SQLite DB management applications (its an AIR application).

• How to add a sqlite database to package for playbook

  I use FlashBuilder Burrito and you have created an application that retrieves data from an sqlite database file. It works fine on my computer, but in the Simulator, it does not find the database. I think that I tried to add the file anywhere in the package, but it never works on the playbook. If I create the database in the code, it works fine, but I need to package the database programmatically.  Can someone point me in the right direction?  Thank you

  This database is read-only?  Never need to change?  If this isn't the case, you'll want to copy it in the folder appstorage as shown in this other thread.

  In any case, you seem to have lot able to find the database file. Here's what I would do in your place.

  Take your .bar file and extract it or dig in there.  It's just a .zip with a different extension file, so I assume that you know how to do it.

  Inside, there are files in the file meta-inf / folder (at the less OBVIOUS. MF that is interesting to look at) and air / folder.  All application files (.swf, assets, etc.) are air / folder.

  To do anything in this air / folder, use File.applicationDirectory.  Which means that if, for example, your database is in air/foobar/mydata.db in the .bar file, you will get a path as follows:

  File.applicationDirectory.resolvePath('foobar/mydata.db').nativePath
  

  Who help me?

  You can see that the file is in a different location in the simulator that where you when you run in with ADLS (test on your development computer) and .bar.  If this is the case, you have several choices, one of which is to change the layout of a way to always appear in the same place, anywhere that you test.  Someone who uses actually an IDE would have to help you with that...

• How to find the SQLite database browser on an imac

  Where is the SQLite database browser on an iMac?

  Here, you can get a http://sqlitebrowser.org/

• How can I distribute a database sqlite with my application

  Hello

  How can I distribute a database sqlite with my request, so that the user has already installed on his system of files ready to be used?

  I mean, can it be packaged in cod files? Or how can I do this?

  Thank you!

  You may store data in the COD file into a text file (CSV or other), then analyze and use the data to create the initial database.

  In fact, connect us to our web servers the initial population. Allows us to update the original data without making a new construction and updated App World.

• create a static SQLite database

  Hi, I want to create a SQLite database and load at run time whenever load application. I want to say that the database can be created at run time, the data file must be created and included in the project for the application load whenever runs. How can I create a database for load file in my application?

  Thank you

  You can choose to read these values from file or hard code the. The choice is yours. In any case you run instructions insert on db.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• How to check the database is created in the database of node 2 RAC

  Hi all
  
  Please allow questions maybe too obvious. I'm not familiar with RAC and ASM.
  virtual box (Windows 7)
  
  2 built nodes on Linux 6.1 Windows 64-bit virtual machine.
  11.2.0.3 software grid & database.
  One of DB name is demo
  Node1 (demo1)
  Node2 (demo2)
  
  
  1. I installed the 11.2.0.3 grid software and set up ASM with her. The installation seems to succeed.
  
  I am able to use view state using crsctl (see the log)
  
  2. I installed the database software and you want to create a database (demo) by default. the software from 95%, but not able to realized the dbca.
  
  I see that the asm_pmon is running, but not able to see the process of demo db. I think at this point, I don't have my demo of database has been created yet.
  
  Yes, question
  1: is the database created?
  2. I try to use dbca to create my demo db, but at the stage of creation of the 'copy of the database files' - she complaint ORA-03114: not connected to ORACLE
  ???? What? What oracle server trying to connect?
  3. If the database is created, how to start the database, in particular it has 2 instances (demo1 and demo2)?
  
  Please advise!
  
  Thank you very much!
  
  
  
  
  [grid@demo1 ~] $ crsctl stat res t
  --------------------------------------------------------------------------------
  TARGET STATE SERVER STATE_DETAILS NAME
  --------------------------------------------------------------------------------
  Local resources
  --------------------------------------------------------------------------------
  ORA. DATA.dg
  Demo1 ONLINE
  Demo2 online
  ORA. LISTENER.lsnr
  Demo1 ONLINE
  Demo2 online
  ORA.asm
  Demo1 Started online
  Demo2 Started ONLINE
  ORA. GSD
  In offline mode offline demo1
  Demo2 offline offline
  ORA.net1.Network
  Demo1 ONLINE
  Demo2 online
  ORA.ons
  Demo1 ONLINE
  Demo2 online
  --------------------------------------------------------------------------------
  Cluster resources
  --------------------------------------------------------------------------------
  ORA. LISTENER_SCAN1. LSNR
  1 demo1 ONLINE
  ORA.demo1.VIP
  1 demo1 ONLINE
  ORA.demo2.VIP
  1 demo2 online
  ORA. CVU
  1 demo1 ONLINE
  ORA. OC4J
  1 demo1 ONLINE
  ORA.scan1.VIP
  1 demo1 ONLINE
  
  Published by: 969880 on November 13, 2012 14:18

  1. What is sure, is that your database is not registered in OCR because there are missing elements in crsctl stat res t exit for database instances.
  2. default DBCA trying to restore an RMAN backup to create a database. DBCA probably also try to connect to the new instance of the database to run scripts.
  3. you must use:

  srvctl start database -d demo
  

  This should start all database instances.

  But first try to check the DBCA logs that should be under $ORACLE_HOME/cfgtoollogs/dbca and to correct related errors.

• How to remove the code of product displayed in public before being stolen

  By mistake I posted Windows Xp (Home Edition) in public. Please advise me how to remove the same before being stolen by others

  Hello

  ·          On what public forum after you have the product key?

  In public forums, he should have the possibility to modify the message you posted. You can remove it by editing your message.

  If you refer to the following link, then it is already deleted.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-having-a-genunine-Windows-XP-Home-Edition/ab555a4a-A752-40Ca-b94f-fda2412d87fb?tab=MoreHelp

• Pre-built SQLite Database faster than the construction of the tables?

  Hello.

  This time when running my application for the first time, about 12 SQLite tables are created programmatically, each containing anywhere from 7 to 45 fields. Timing of the launch of the app, a call to a web service also serves the database.

  I noticed that the table under construction seems quite slow, I don't know if it's just because the application runs for the first time and the device must perform some work of registry, or if the table of construction process is actually this takes time.

  From the time I click my app icon at a time that the user interface is displayed with actual data can last from 20 seconds to more than a minute, which is not good. Do I have to create a progress meter to indicate the user to be patient because the database tables will be created, or is it possible to include the database pre-built with my app? If so how would access (where he would be on the filesystem?).

  Thank you very much.

  "If the process of construction is in fact this long"

  That would be my bet.  Easy for you, but check with trace entries.

  "Can I create a progress indicator.

  You should have a flag indicating to the user that you are doing something at least, a kind of circular icon loading would be better than nothing.  If you it can match real progress or not depends on what you are tracking and how.

  "is there a way to include the database pre-built with my app"

  Yes - See the demo of SQL comes with your set of tools.

• Ugh... Requirement: A TimerTask making an HTTP call, parsing JSON, insertion into a SQLite database.

  How to implement a better design of the following?

  I have a UiApplication which has the following requirements:

  1. A static timer in the class that extends UiApplication.
  2. A class that extends screen and contains a class internal which extends TimerTask.
  3. When a user accesses to the screen, the TimerTask is started with:

     _timer.schedule(MyTimerTask, 1000, 15000);
     

  4. The first step is to do an HTTP call and return a valid JSON object which varies in structure - that is, it has a wide variety of paintings and JSON objects.
  5. The second step is to analyze and insert the JSON object values into tables in a SQLite database. The SQLite file is on the map.
  6. The third step is to read the updated SQLite table, loop through the table and build my ObjectListFields with the new values, and attach them to a VerticalFieldManager.
  7. The fourth step is to replace the old VerticalFieldManager with the new VerticalFieldManager and push the screen pop and updated then the current screen - so I have a stack of view high one single layer.

  Now the logic is actually on the spot, but since the TimerTask must cover every 15 seconds, I am a memory leak in all directions.

  To try to solve this problem, I have:

  • Cancelled the TimerTask with the onObscured and the onUiEngineAttached (false).
  • Restart the TimerTask with onExposed and onUiEngineAttached (true).
  • My DatabaseConnection closed the finally statement.

  However, when I look at the objects in Eclipse BlackBerry objects View when the TimerTask is not running, I still see 1 ~ 4 TimerTask objects and 1 ~ 4 DatabaseConnection objects.

  TimerTask both DatabaseConnection have a static instance (I don't have several entry points) with the following in my class that extends UiApplication:

  public static Timer _timer = new Timer();
  public static Database db = null;
  

  I attribute db when I need it with a call to DatabaseFactory.open within the class that extends TimerTask.

  Now that the business logic is correct, how to improve the design so I don't not leaking memory in every way?

  The statement closed the database is being called in, because I can set a breakpoint and see it has reached.

  Instead of onObscured/etc, you can move them into onVisibilityChange (boolean) is only in one place. Cancel your existing TimerTask before running a new, or at least check the TimerTask reference if you are only creating a... not just passing 'New TimerTask' in the calendar method without being able to track this object reference.

• view the contents of the sqlite database

  Hey

  Have created a sqlite database and entries stored in the database, I'm stuck all trying to display the contents of the database on the screen.

  I tried thi, but it does not work.

  Try
  {
  D database;
  Var myURI = URI.create ("file:///SDCard/Databases/SQLite_Guide/" +)
  "MyTestDatabase.db");
  d = DatabaseFactory.open (myURI, true);
  Statement st = d.createStatement ("SELECT * FROM data ;"); ")
  St.Prepare ();
  St.Execute ();
  St.Close ();
  d.Close ();
  }

  Can someone tell me please on how should I proceed?

  Thank you very much.

  Remove the rank r = c.getRow (); exposed outside the while loop and check.

  because, it is the 1st row in the result set is assigned to the r. If the query returns only one record, the while loop will not run.

  Before you ensure that the data are available in the table.

• SQLite database

  Hello

  How to remove a database created with sqlite? How can I find the database file?

  Thank you.

  gigiks

  This might help you

  http://StackOverflow.com/questions/6922955/how-to-find-the-location-of-database-created-using-HTML5

• How to display icons in FORM 11 g

  Hi all
  
  I use forms oracle 11g 64 bit on windows server 2008 64 bit (fusion middleware) and oracle database 11g 64 bit.
  
  My question is that how can apply icons in forms 11 g?
  
  before this, I create a form with developer 10g with icons on the buttons,.
  now when I compile these forms in forms11g, the icons will now appear.
  
  How to get around?
  
  Kind regards.

  Hello

  Just do the following:

  1. place the images in a folder of your choice. Theoretically, we will assume that they are found in-> d:\images

  2 configure your environment so that ORACLE_HOME\jdk\bin is in your path in order to run the jar utility.

  3. create a jar file using the images in the folder d:\images as follows:

  a. cd d:\images

  b. jar - cvf icons.jar *.gif

  3. copy the file icons.jar in the ORACLE_HOME/forms/java folder

  4. with the help of Oracle Enterprise Manager 11 g Fusion Middleware control make the following changes to the formsweb.cfg:

  Archive = frmall.jar, icons.jar.

  b. = codebase imageBase - this is necessary if you use images from jar files.

  6. make sure that the appropriate entries are defined in the Registry.dat indicating the type of image file used for the icons. In addition, the example used here requires that the value of default.icons.iconpath be blank because the images in the jar file is not in a directory structure.

  default.icons.iconextension = gif
  default.icons.IconPath =

  NOTE: You may need to clear the cache of client jar files if you have made changes to the Registry.dat so a new copy will be downloaded.

  Reference Note: how to display iconic Images forms 11 g [960103.1 ID]

  Hope this helps you :)

  Concerning
  Carlos

• Quick question: the database of the APEX can get synchronized with a SQLite database?

  Hi all!
  
  So, I'm an intern and I am applying in the APEX, and there's another student here who made the same request, but then for Android. It uses SQLite as a database (because it is a lightweight database), and I use the database to Oracle 11 g, which is used in the APEX. My request is already hosted online (via oracle.apex.com), so the database is online as well.
  
  Now, I have done some research, but I have never met a useful answer.
  
  Is someone here can tell me if this is really possible?
  As in, can synchronize my Oracle 11 g database and its SQLite database?
  
  Please, just a "Yes, it is possible", or a "no, won't it be able to do' will do. But if you say yes, and you also happen to know how, so any suggestions would be welcome. ;)
  
  I have 6 weeks to know, but I prefer to know in advance...
  
  Thanks for your response!

  Hello

  I think that your question do not relate in any case at the APEX. It is more related to data bases it self and connections.

  This might help
  Creating link to Sqlite db?

  Kind regards
  Jari

  -----
  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0