How to display an object mesh continually update with the Labview 3D photo object
I have a stream of update permanently of 3D images that can be represented in a mesh (a film in 3D if you want). I want to display in the 3D image object so that whenever I acquire a new 3D image that it is displayed. Examples are rare, and I couldn't find anything that dealt with this particular issue.
Currently (in a FOR/loop WHILE) for each iteration I create an object of the scene, set the geometry as an object mesh newly created, set the texture and it wire eventually to the 3D image. This implementation seems a memory leak (Task Manager shows permanently increases the used memory and processing speed will eventually drop). I guess that's because I recreate the object for each iteration. Problem is, I can't find something that would let me release/delete the object once I'm done with the framework. All the examples I found only deal with the creation of the 3D object once and manipulating.
What is the appropriate way to code this?
You just need to use the "narrow" VI on reference photo 3D like this code below. It runs inside the loop.
Now, if you're dealing with the mesh, then you should use the set the mesh to change the points inside the loop and then just close the reference after the code is done. Look at this code below. The trick is to recover the object using Typecast (to more specific reference VI) reference.
Also, look at examples of shipping to:
C:\nivs_dev\2013\InstallTo\ProgramFiles\National Instruments\LabVIEW\examples\picture\3D Picture Control
and especially the with Meshes.vi.
Tags: NI Software
Similar Questions
-
I bought an iphone used several years ago... When updating with the new iOS 7.1.2 recently, he was locked with previous apple owners account.
its now useless. I didn't know all these crappy activation locks and all.now I have no idea
How can I find my iphone is off and use my phone back
iphone 4 32 gb
-
Please help me understand how to install updates with the following error Message
The following updates were not installed:
Security for Microsoft XP KB 2289162 update
See the section "How to get help" of http://support.microsoft.com/kb/2289162
For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7
Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made. All the patches?
Thank you
Hello Launcher,
Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.
I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.
I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!
-
Original title: kb2633171 security update will not install windows vista
Hello
as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.
I ran the fix it and aggressive to solve this problem, no luck :-(
any help muchly appreciated.
Thank you!Chiara
Hi Chiara,
Try following the steps in the following article.
You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
http://support.Microsoft.com/kb/883825
Let us know if it helps.
-
How to read/write tdms 2.0 files with the TDM C DLL?
Hello
How to read/write tdms 2.0 files with the TDM C DLL?
How consequently the datas in interlaced with the TDM C DLL mode?
Thank you
Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.
-
Bug in reporter Panel updated with the property Value Chart
Hi guys,.
Defer to what the Panel update property is set to true and chart is updated with the help of node "Property value", data are not updated graphics. Capture of the block diagram and VI (2014) screen gasket.
Is this a known bug, and is there any fix for it?
Thank you
Knockaert
I have not tried running your code, but here are some possible solutions:
- There is a primitive to write the value of a control by index (added in ~ 2013). This is designed to be used others live too and should work like a local.
- You can send data using another way (like a queue, etc.).
- Use the Ctl Val.Set method.
- Do not use a chart. Use a chart and manage the buffer yourself. You can find some examples if you're looking for graph XY.
-
How is it possible to specific your own, with the constant help of string to locate a directory where the NEW
created the folder to save?
-
I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)They all install properly but switches back to windows update to install. It's some kind of loop.
Hi billy73,
In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.
I hope this helps!
-
Update with the Lead feature and several lines
I have a table such as:
Table1:
OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName
123 11/5/2015-12/31/2099 File5.txt
123, 7/11/2015-12/31/2099 File7.txt
or it can look like:
Table2
OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName
123 11/5/2015-11/7/2015 File5.txt
123, 7/11/2015-11/9/2015 File7.txt
123 11/9/2015-12/31/2099 File9.txt
123 11/15/2015-12/31/2099 File15.txt
I want to take the 2nd to the last EndDate and update with the previous value.
So in fact, it would look like this.
Table1:
OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName
123 11/5/2015-11/7/2015 File5.txt
123, 7/11/2015-12/31/2099 File7.txt
or
Table2
OrderNumber EFFECTIVE_DATE EndDate FileName
123 11/5/2015-11/7/2015 File5.txt
123, 7/11/2015-11/9/2015 File7.txt
123-11/9/11/15 to 2015/2015 File9.txt
123 11/15/2015-12/31/2099 File15.txt
I got it work in a select statement to a single value. now I just need help it enter an UPDATE statement and update all records.
SELECT W.EFFECTIVE_DATE, W.EFFECTIVE_END_DATE,
NVL (LEAD (W.EFFECTIVE_DATE, 1) (ORDER implementation W.EFFECTIVE_DATE), December 31, 99 ') AS 'EFFECTIVE_DATE_NEW '.
OF WH_ORDERS_REPORT W
WHERE ORDERNUMBER = '10460992';
It did not work:
UPDATE WH_ORDERS_REPORT WH
SET EFFECTIVE_END_DATE = (SELECT NVL (LEAD (WH2. EFFECTIVE_DATE, 1) (ORDER of WH2. (EFFECTIVE_DATE), DECEMBER 31, 99 ')
OF WH_ORDERS_REPORT WH2
WHERE WH. ORDERNUMBER = WH2. ORDERNUMBER)
I appreciate your help in the creation of an update statement to do this.
Rap, but it's working now. I'll confirm with a few other records before I mark as correct, but what I see so far, it is beautiful, thank you!
merge into WH_LIFELINE_ORDERS_REPORT D
a_l'_aide_de)
Select
DISTINCT ORDERNUMBER,
CURRENTSTATUSDATETIME,
NVL (LEAD(EFFECTIVE_DATE, 1) ON (ORDERNUMBER partition
(EFFECTIVE_DATE order), December 31, 99 ') as EFFECTIVE_END_DATE
of WH_LIFELINE_ORDERS_REPORT
) S
WE (D.ORDERNUMBER = S.ORDERNUMBER
AND D.CURRENTSTATUSDATETIME = S.CURRENTSTATUSDATETIME
)
When matched then
setting a day of set D.EFFECTIVE_END_DATE = S.EFFECTIVE_END_DATE;
-
How to write a query to return rows with the varchar column that contains even a single occurrence of the characters, such as Ÿ and
I have a table whose columns with values such as
MINNEAŸPOLIS and ¿VV ¿A
Only the characters that are allowed in this column are alphabets, numbers, spaces, points and supports.
Please help to write a SQL SELECT with Regexp_like query or any other option.
Thanks to you all! Under query worked for me. Thank you Frank to explain the concept of hooks inside regexp_like.
SELECT * FROM testspecial, WHERE REGEXP_LIKE (sampletext, "[^] ^ A - Z ^ a - z ^ 0-9 ^ [^.]") ^ {^} ^]') ;
-
Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current. With the help of Mac Yosemite, Lightroom CC
Thank you!
File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.
-
1013 JDev how 2 display number on a specific attribute on the output text table?
Page 1: I created a form of parameter with 7 top search criteria fields and table of results of search or a Table read-only ADF downstairs. The setting is based on the application of top link where each parameter is as the corresponding field in a table and works very well!
For Page 2: I want the page looking at the same research, same parameter table of search results albums and even down with the addition of display also count on a particular area so that when someone enters data into the fields of setting up, he would always check the table and show the results of all fields, but in the last column do a count on this field (totally separate from the default number of records to search entire JDEV).
Is it possible to create as a count or count (*) function at the level of the line of text out? I tried to create a view based on a Select sql statement a, b, c, d, count (e) table, group by a, b, c, d, e and when I dragg this object that contains this sql statement from the data control panel, it gives me the correct regulation of all areas, including the last column to display the number of records for this field , but together does never change based on what has been entered in the parameter, it is as if he is not yet connected to it. For ex: I want to display the number of all students within the setting of the East region, on the contrary it shows total number for all regions, not specific to East.Hello:
I worked on a very simple application form ADF search against table Scott.emp in the Oracle database.
Now I see what you mean. The idea is probably you shouldn't directly drag and drop control of your data: directly in your jspx as «ADF search form» Here are the steps:
(1) create your entity object, the view object and I'm in the model layer; (You have already done this, you do not have entity and your view may come of TopLink request;)
2) double-click the View object in your project of "model"; Add a connection variable: type Bind_deptno Number. It's read in a number of dept on the search engine;
(3) change the SQL statement of the Emp View object on the same place as 2); WHERE Emp.Deptno = NVL (: Bind_deptno, Emp.Deptno) this indicates ADF if the binding variable is bound to a value
then use this value, or if it is null, just ignore it. That's the tricky part;
(4) create a new JSF called "Search.jsp', which will be the search engine;
(5) from App Module, select EmpView1 (EmpView is updatable, EmpView1 is read-only, but it is not serious on the research plan), drag and drop the EmpView1 on your
Search.jsp as an array of the ADF (not a search ADF form). This ADF table then displays the result of the research;
(6) of the control Module of the App, go to EmpView1 data, drag and drop a "ExecuteWithParams" on your search engine like settings-> parameter ADF
Form, this will tell ADF you want to set the variable binding as an executable looking for shape parameter.
That's all! and you're good to go. Do the same for the other variable binding (you have 7 search criteria, so you have set 7 bind variable by using the same logic here.
Good luck and don't forget to mark my answer as "correct" it to make me a few partitions.Best regards
Alex IBE -
How can I add another mesh on top of the previous stitch
Hello:
I tried to add multiple stitches on top of the previous stitch, do not replace does not precedents.
Can someone help me please?
Steve
It is not possible AFAIK. Meshes are related to the subject, in order to obtain a new mesh, you add an object on top of your an existing one, which could be as simple as an empty box.
Mylenium
-
How to display a message after inserting line in the table...
Hello
I want to display a message after inserting rows in the table as *' you have inserted a new line with success *'.
I use the ADF button createinsert to insert the rows in table.after that I am stolen it.
After commit I want to display message for the user.for what I need to do.
Please help me.
Sanchez.
Double-click the validation button, to link Action property dialog will appear and then create a method of bean managed for the validation button.
Then, add the following code to the method:public String saveButton_action() {}
BindingContainer links = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
Object result = operationBinding.execute ();
Note "!" operator has been removed from the default code.
{if (OperationBinding.GetErrors (). IsEmpty())}
FacesContext ctx = FacesContext.getCurrentInstance ();
FacesMessage saveMsg is new FacesMessage ("saved successfully");.
ctx.addMessage (null, saveMsg);
}
Returns a null value.
}Then, restore the ActionListener value.
I hope this helps.
Maybe you are looking for
-
Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.
-
Envy dv7: SimplePass Windows 10 Finger Scanner does not
I installed Windows 10 months. I recently installed a "critical" update After the installation of the system, my icon 'start' at the bottom left of my screen don't work anymore. My SimplePass is no longer turned on or worked. I did a system restore
-
Hello I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do. Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be dif
-
error 0xc0000135 on a windows server 2003 R2.
Whenever I want to run any app, I get error 0xc0000135 on a windows server 2003 R2. Anyone has a solution, because it can be run almost anything same not my antivirus.
-
Update from Windows XP to Windows 8
I want to upgrade from windows XP to windows 8, I inserted the disc but it says: windows installation cannot be started from the current operating system. To install boot windows from the installation media. How do I boot from the installation media?