option to print Photosmart 6510 not highlighted

Similar Questions

• Photosmart 6510 - not applications registered

  I just bought a Photosmart 6510 & web services installed, but when I select from the page ePrintCenter Apps none are listed? I tried this on my Macbook (Safari) so much & my wife Windows 7 laptop (IE) with the same result. I also tried to delete & reactivation of services web, but this did not work, either? Everything else seems fine so don't think that there is a problem with the network connection. I know that this printer has simply been replaced by the 6520 but probably I should still be able to install apps?

  Tpyical - as soon as I posted the message that I found the solution. For anyone else having the same problem, I had put the region of Europe rather than the UK. Once changed, I re-activated the web services & apps appeared!

• Oh my God, I want to shoot this printer photosmart c4780. not recognizing cartridges!

  OK, I'm not a fool.  I replaced the toner cartridges and a million times.

  I can't get the printer to recognize I put the cartridges.

  I tried at least 25 times.  I make sure that cartridges click every time and have removed every last piece of Ribbon to each of them!

  Help, please!

  You use genuine HP cartridges?

  If Yes... to do this:

  Hard reset - while the printer is turned on, pull

  the power cord of the printer and then to the

  wall. After 30 seconds turn the wall supply

  and the printer. This will trigger a "dirty power upward.

  and restore the printer has been good

  condition (if possible). No user settings are

  lost with a "hard reset."
  This "Hard Reset" is one of the most powerful

  tools to use when the hardware of the printer is not

  works correctly!

• Photosmart 6510 print with only black print cartridge?

  Hi, can printing Photosmart 6510 in black & white (not gray, but b & w only) when the black ink cartridge is not empty, but all the other cartridges are? If the color cartridges are not already installed, it will always show b & w?

  Hello

  The 6510 PS will not work if the color cartridges are empty but the black ink.

  However, I think that it would be possible to print using only black ink but to do ink in the cartridges of colour as well because in case of maintenance color cartridges to do little ink in the print head maintenance routines.  When the head is friendly if there was no colour ink this part of the print head could heat upward too or overheat.

  Anyway, back to print in black only.  You mention that you do not want t p rint in black and white so you know where to look in the driver to get to this option. Then in Word, Excel or any program, go to the print function.  Click on properties. Click Advanced. You should see where you have levels of gray.  If you clock in the option box should reveal the other options will be "Black Only". Select this option.

  As I said you should be able to print using only black, but you will need the color cartridges ink.

  Hope this helps.

• Photosmart 6510: Photosmart 6510

  I recently bought a new laptop and I would like to install my printer Photosmart 6510, but can't find the software anywhere CD. Is someone can you please tell me where I can download the software/driver for it. Thank you

  SickNTired,

  To - Some of the Support pages have been kicking around recently.

  Here's a direct download link:

  HP 6510 V28.8 PS6510_1315-1

  Installation instructions remain the same.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart 6510 - Windows 7 - I need to the Port ID to set up my modem for wireless connection

  Printer: PhotoSmart 6510

  Operating systems: Windows 7

  Modem: Huwawei E586

  The printer configured easily to the modem for wireless connection.

  The problem I have is that my laptop cannot see the IP address of the printer when I try to configure a wireless connection.

  I am trying to add the IP address of the printer to the virtual server from the modem list.

  What is the PORT ID required by the printer?

  This information is not in the installation notes.

  I found it. It is Port 9100

• Photosmart 6510 noise

  I have a model B211a printer Photosmart 6510 e - All - in - one series. My computer is an iMac with Snow Leopard OS. Lately, the printer makes a noise of rattling/knocking hard. This seems to happen when the printer screen says he's going through the process "printer preparation occurring." No idea why this is happening or how to fix? Thank you.

  garytech1, your suggestion to clean the rollers seems to have taken care of the problem of noise. This printer has always made noise, but I don't hear the rattling. Thanks also to describe how get to the rollers because graphic design is different from the model that I have. Kudos to you for your help and your expertise.

• I have a Photosmart 6510, which will not print in black.

  My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

  I tried all the basic tests & troubleshooting but who still have the problem.

  It allows to print from the photo tray 4 x 6 end.

  Help, please!

  Steve

  Hello bcgoodwrench,

  I don't see you mention the presence of 'BLACK'.

  
  If there was no black printing, then I would say you call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836 .

  If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• EPrint does not print the spare part on Photosmart 6510 using MACBook ro

  When I send an email with attachments to my Photosmart 6510, it prints the email but not attachments

  What type of attachment you send?

  The file types are limited to Microsoft Office (some of them), image files (jpg, gif, tiff, and a couple more) and HTML formatted emails condition are not any dynamic material in them.  File size is limited to 5 MB for e-mail + attachment

  What does say in your ePrint centre?

• Series 6510 Photosmart will not print at all, or very light ink, after the installation of the Mavericks

  21/01/14 hi support community - after having installed the Mavericks a few weeks ago, I can no longer print to my HP Photosmart 6510 of any of my devices Mac: MacBook Air, iMac, or iPad.  The printer acts like it is printing, even if the result is either no impression on the page or something almost too small to see, with weird colors. I replaced all ink cartridges.   I was on MAC support forums and have done everything suggested, i.e. reinstall the printer, reset the printer, so that reset each device.  The printer will not print a test page.

  I need to use my printer.  Help please!  Thanks, Bonnie

  RESOLVED (I think).  After posting my question, I continued to search for possible answers.  After starting from scratch, I followed the instructions and others have left regarding the problems of scanning.  Seems that whatever it either which has interfered with printing can also lead to the (logical) scanning.  I have no idea what exactly 'fixed' my printing problem even if at the moment everything seems to work.  (I did not scan anything - and this time not afraid of)

  Thank you to everyone who takes the time to write clear troubleshooting advice for us non-tech people who have to find out things about ourselves.   Bonnie 12:30, 21/01/14

• Photosmart 6510: Printer not found the new router

  Hello

  The Photosmart 6510 says that it is connected to the network of law with a beep sound intense, works with a usb cable and print a test without error page. BUT nothing comes out when I try to print something with wifi. It remains in the queue. Print and scan doctor finds nothing. WiFi worked before changing internet provider and so the router (I guess that's the name of the area which gives access to the internet). Tried to turn all market again and reinstall of the printer.

  The supplier offered to modify the number of IP printer, that has not helped. Using Windows 7.

  Any ideas?

  Thought I had answered this, but it is not displayed on the site.

  Now printing without cable USB between the router and the printer. I think it's helped the router to communicate the correct number of IP to the printer.

  Anyway, problem solved. Thanks for your efforts!

• Photosmart 6510 print size is not not to paper size

  Problem: I select paper photo 4 x 6 size when you print from photoshop, the final print has always an empty border 1/2 inch, even during the selection of printing without margins.

  Printer model: HP Photosmart 6510

  OS: Windows 7

  Method of connection: wireless

  Error messages: no error message

  The right driver is not designed to accept custom paper sizes.  You can have the printer to use another driver that supports them well.  I will link to a post with the steps to assign another driver print below.  I hope this helps.

  How to assign other print in different Versions of Windows drivers.

• scanner can not find the printer hp photosmart 6510 e all-in-one

  I tried all the help and downloads to try that works - I don't have the disk.  Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan.  He says that it cannot find the printer.  I tried to download all the drivers etc from windows, hp Web site.  He says, make sure that it is connected to my computer?  If the printer is connected wireless why my scanner isn't?

  There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?