How to do in my bios on aspire 5552
How to do in my bios on aspire 5552
All you have to do is to power off the unit and start screen which shows the Acer tap the "F2". This will take you into the screen of the Setup (BIOS) utility
Tags: Acer
Similar Questions
-
How to upgrade bios acer aspire x 3300
How can I update the BIOS on my Acer Aspire X 3300 desktop PC?
How can I set the BIOS to start PC installed add in card?
your latest is for your version.
XX. BX versions cannot be flashed on xx. AX
-
How can I upgrade the bios m5-581tg to 2.11?
I would spend my M5 BIOS - 581TG Aspire to 1.12 to 2.11, so I can have UEFI full support of windows 10. Right now, I can't start in installing 10 default directly woindows UEFI. the only way to do is to activate the f12 boot menu and select the "unknown DVICE: Windows Boot Manager" which is embarrassing and prevents me from dual-boot easily.
So I tried to upgrade the BIOS on the official website located here: However, when I download, unzip and run the application, I get the following error. "Please upgrade to the same type of BIOS (version 1.x)" and after I click OK on this error message popup utility closes and I can't upgrade the BIOS.
How can I do this so that I can have the support of UEFI?
No, no way.
the 2.x versions are only M5 with windows 8 plant, yours has windows 7.
-
Recovery BIOS for aspire One KAV60
Hello!
So I was pretty stupid and while trying to solve a problem of small equipment (who did get fixed), updated the BIOS from the support section. Now I'm in my ears with a lot of other small problems (USBs malfunction every 10 minutes, forcing a reset. Power be ultra sensitive and the flicker of the screen constantly, being slower, etc..) and I was wondering if there was a way to restore the bios to the previous version of factory. Current BIOS problem I have on it is v1.26.
Thank you for your patience and support!
-RichHello Astro,
Enclosed all versions of bios for Aspire One AOD250 (KAV60):
BIOS Acer BIOS 1.29 2.6 MB 12/27/2010 Download BIOS Acer Improves the performance of the battery. 1.28 2.6 MB 16/08/2010 Download BIOS Acer Changes the output Page pop-up message string and the stri [...] 1.27 2.6 MB 15/03/2010 Download BIOS Acer Fixed incorrect Atom N280 CPU frequency in the Windows 7 operating system. 1.26 5-2. MB 01/02/2010 Download BIOS Acer BIOS 1.25 5-2. MB 2009-12-08 Download BIOS Acer BIOS 1.21 2.4 MB 05/10/2009 Download BIOS Acer BIOS 1.15 2.4 MB 21/09/2009 Download BIOS Acer BIOS 1.14 2.4 MB 15/09/2009 Download BIOS Acer BIOS 1.07 1.4 MB 06/07/2009 Download You have not indicated your versions of windows.
So I advise you to reflash your bios on MS-DOS (safer).
To Flash the bios with MS-DOS:
1 make a Flash drive bootable MS-DOS with FlashBoot (demo) or How to make a MS-DOS bootable flash drive (USB key)
2 - Download the bios file.zip#/
3-copy FLASH-. EXE, KAV60. BAT and KAV60.fd on a USB key.
4 - boot on USB.
5. When you are on MS-DOS, type the command KAV60. BAT
6 - if it of flash successfully, restart your system (normally, it reboot automatically).
7 - Enter the configuration utility of the bios, "Load the defaults of optimazed".
-
How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)
I have just flashed the BIOS on my Satellite Pro P100 4.8.
The CPU runs at 100%. (90% + for windows explore)
Only a single core is recognized by my Vista gadget.
85 CPU temperature
How can I "downgrade" the BIOS? Where are the older versions?
When the new BIOS version is available to download older versions are not available more.
What Satellite Pro P100 you exactly (model name, model number)? -
How can I reset password BIOS on Satellite Pro M30?
Hello!
I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?
Thank you all in advance.
John.
Hello John
Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.
You can contact the after-sales Service of Toshiba partner. They will remove password for you.
Good luck!
-
How can you get into BIOS on a Satellite 320 CD.
Hi my name is steve, I was wondering how get you into the BIOS on a satellite 320 CD. Because it's my first format at the top of a tower. Done a lot on the office laptops just never. As some fool tried to do before me and distroyed it. Now the only thing that happens is when the toshiba logo disappears this message appears, INVALID SYSTEM DISK, REPLACE THE DISK, THEN press ANY KEY. It allows to run Windows 98 and it worked great for what age there. Hoping to put XP on it, but its only got a small hard drive (4099 mb). So will hand 98 on it until I get a bigger hard drive. Only need to teach my daughter how to respect a laptop. I want to get into the BIOS for the format. No instructions on how to enter the BIOS would be great, because I'm good from there. Thanks in advance for your help.
Hello
You suggested that you want to enter the BIOS to format the HARD drive. Very strange.
However, if you want to boot from the CD so you can also use the C button immediately after the power button.
The laptop should boot from the CD of Win98. The installation procedure contains a HARD drive format option. -
How to access my laptop Bios Tecra A4 computer screen?
How can I access my bios Tecra A4 screen. There are tweaks, I would like to check.
Hello
Try using the ESC, and then press F1 to access the BIOS.
Good bye
-
How to change in the BIOS at startup Satellite C of ODD
How can I change the BIOS to boot the laptop from DVD?
What cell phone do you have?
In the case of notebook with UEFI BIOS you must disable the safe boot option to boot from an external support...
-
How can I change the BIOS on Satellite A40?
How can I change the BIOS on the A40
Hi Denis,.
Toshiba ensure an update based on Windows and a traditional update of the disk of the A40. The new BIOS can be downloaded from the Toshiba web site http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=UK where you can also read the complete instructions on how to apply the new BIOS.
Please read the instructions very carefully, as errors in the procedure can lead to costly repairs.
Kind regards
-
How can I reset remove bios of the G4 Core 2 Due Series Pavilion
Please tell me how I can reset remove bios of the Pavilion G4, I forgot the BIOS password.
My Code stop it is 70886016
Thank you.
Dear customer,
Welcome and thanks for posting your query on the Forum from the HP Support
Looks like you are looking for a password here, we will surely help you with this problem
Please try this password = 65784038
Steps to follow:
1. use the posted above unlock code to access the BIOS
2 disable all passwords that are enabled
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
6. then exit the BIOS saving & exit option to save the changes.
Troubleshooting:
Incase if the password does not work please try a Hard Reset as follows.
1. power off the laptop
2 disconnect the power adapter and remove the battery
3. press the Power button for 30 seconds
4. connect the power supply/AC adapter (leave the battery for now) & start Notepad
5. If now see you a password, please enter the same password I've shared before and press on enter
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star KUDOS left to say thank you*.
Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP
-
PC HP ENVY 700 series: How do I enter the BIOS settings
How can I access the BIOS on this computer settings?
Hello
Start typing the ESC key after turning on the PC.
Another option is to enter: change of advanced boot options on the start screen.
You can also check out this other method.
-
where the virtualization is technology BIOS setting aspire v5-561-6607
where the virtualization is technology BIOS setting aspire v5-561-6607
-
Dead laptop after the BIOS update. How can I restore original BIOS?
Model: HP Pavilion m7-1015dx
Original OS: Windows 7
Current operating system: 64-bit Windows 8
Problem:
I tried to update the BIOS by using this file:
Release: 2013-10-08
File name: sp63801.exe [1/1, 6.56 M]
Version F.29He gave me a Blue Screen of Death and the computer restarted. After the restart I only get a black screen, the fan comes on but there is no text and no way to access the BIOS, or the start menu.
The led caps lock starts to blink twice, then stops for 1 ~ second then blinks twice again and again, indefinitely. This, according to HP, suggests a failure of the BIOS Corruption.
What I tried:
I do not have the HP recovery partition, so I tried to install the two update of UEFI BIOS HP SoftPAQ and HP UEFI support SoftPAQ environment on a FAT32 USB key named HP_TOOLS. I tried these tools separately, at the same time. I tried them with 3 different bios downloaded from this site. I hold the button windows and B, then turn on the computer. Nothing happens. I tried Fn and B, holding them for different periods, there are no beeps, no text on the screen, nothing. The led on the USB key blinks ten times at the beginning and then stops, then starts flashing caps lock. I tried to put the .bin file in different folders in the USB port, including the root, same result. No.SIG file is in the bios I downloaded.
I am on mobile, excuse the errors. What Miss me?
The message here by 'jayvastani' seems to work for many. The only thing different from his post a year ago would be to skip step 4. The rest should be all you need. Good luck!
-
How to do in the BIOS on my HP Envy running Windows 8.1 to enable Hyper-v
How to do in the BIOS on my HP Envy running Windows 8.1 to enable Hyper-v
Thanks for the reply old_geekster. I understood what I needed for my HP Envy and who had to press F10 at startup, not ESC. Once I press F10 fast during the start I in the Boot Manager and has managed to 'Turn on' virtualization, which is what I need to activate "Hyper-V" in the operating system, which then allows me to use Microsoft and VMWare virtualization.
Maybe you are looking for
-
Texas use faith E-mail window displays tiny fonts after using the function key can not reverse
Open E-mail c - faith and tried to highlight several entries by maintaining control. When I did the font on the page became so small it is not readable. How do I reverse this order?
-
Received a call from phone to Microsoft lawyers, where should I report this?
I just got a phone call from Mike Johnson to "microsoft" telling me that he would help me with my unwanted programs. who should I report this?
-
10 pro &; Photoshop CS6
Hi from the United Kingdom, I have Mac OS x 10.9, Photoshop CS 6 and 5 of Lightroom. I've updated the LR5 with Print Pro software but I am unable to see Print Pro in CS6, it's ok in my CS5 software. Please can you advise if there is a plug in for CS6
-
I want to store thumbnail images of bmp in an access 2007 database to be included in the reports. Currently images are in jpg and png files my system. Is there a way to batch convert these images in bmp? I used Irfanview and other applications, but t
-
Cannot download photos on my facebook or myspace or send an email.
I click the button selection of photos on facebook, myspace, photobucket and my email and there's just the same thing when nothing happens normally my photos pop up.