where the virtualization is technology BIOS setting aspire v5-561-6607

Similar Questions

• PE2950, virtualization and VMware ESX 3.5.2 technology bios setting

  I PE2950 with VMware ESX server 3.5.2 is installed.

  The activation of the "Virtualization Technology" BIOS setting (under information CPU) will cause problems with the operating system? (it was disabled when installing ESX on it – default setting)

  
  

• How Flash the BIOS on Aspire S3-391 when no present OS?

  I have a new Acer Aspire Ultrabook S3-391-6862.  I want to update the BIOS on the unit, but has difficulty because there is no OS on the Ultrabook again (it came with Win8 on it but I wiped the HARD drive to put Win7 on it).  I downloaded the latest BIOS (BIOS_Acer_2.17_A_A.zip) and unpacked.  It contains 2 files:
  (1) HB2V217.exe (size = 4, 664, 003 bytes)
  (2) Readme.txt (this simply says "Windows flash: Please click on 'HB2V217.exe' to update the bios").

  I then added this "HB2V217.exe" (4 664 003 bytes) the Win7 DVD (I did a DVD ISO, then adds the "HB2V217.exe" of the ISO file, then burned a new DVD of Win7 from this new ISO standard).
  The new DVD of Win7 boots fine, date at which I hit 'SHIFT - F10' to a command prompt, navigate to the "HB2V217.exe" file and run it, date at which it gives me a message error "subsystem required to support the image is not present.

  Other misc notes:
  -If I look inside the "HB2V217.exe" (4 664 003 bytes) with 7Zip, it contains 4 files:
  (1) HB2V217.exe (size = 4564828, but it has the same name, as it is the container for HB2V217.exe 4 664 003 bytes).
  (2) PopMsg.exe
  (3) wFlash.bat
  (4) wFlash.exe

  Obvious questions:
  -Should I copy the 4 files for installing Win7 disc rather than their container?
  -Can you tell me what I am doing wrong?

  Thank you

  Thank you for your help Jean Philippe, although I have now solved the problem, though in a different way.
  To answer your question though, the latest version of BIOS was 2.09.

  My solution was tedious but I downloaded "WinPE", built a flash drive bootable with it, the file copied BIOS "HB2V217.exe" (version 4 664 003 bytes) in the flash drive, booted from the flash player, sailed to "HB2V217.exe" and run it, date on which she flashed BIOS 2.17 new to the Ultrabook and rebooted, and success.

  For anyone who has the same problem, it was my convoluted solution (in a manner of long-term assuming that those who read it are not familiar with some aspects of computers).
  -on another computer, I did the following:
  (1) - download Windows ADK ("adksetup.exe"), which is free (http://www.microsoft.com/en-us/download/details.aspx?id=30652).
  2-) plugged a USB key (something more bigger than 200 MB is fine).
  (3) - open windows explore and noted the drive letter of the USB Flash drive, I just plugged.
  (4) - ran the "adksetup.exe" and chose only "Windows PE" of all it's features (I forget if I run 'adksetup.exe' once or twice, but have downloaded more than 3 GB of files in total.
  (5) ' adksetup.exe' run and got a box of command prompt.  I typed in this box (but without the quotation marks):
  (6) "copype x 86 C:\WinPE_x86" (I chose 32 bit (x 86) version, although it may either have worked). "
  7-) after he finished I typed ' MakeWinPEMedia/UFD C:\WinPE_x86 E:.
  (8-) where "E:" is the letter of your Flash drive you noted in step 3.
  -NOTE that it will erase and format your USB Flash drive, so be sure you don't have any data you want to keep on it and make sure that you have given the CORRECT DRIVE LETTER or YOU WILL FORMAT AND LOSE DATA ON a DRIVE OTHER!
  9-) copied the "HB2V217.exe" file for BIOS I unzipped from the zip file, I had downloaded from Acer, for the flash to the root drive.
  10-) moved the to the Ultrabook of Acer and started the Ultrabook USB Flash drive (after setting it's BIOS to boot from the USB ports).
  (11) - target navigation on drive "C:" of the Ultrabook in this is the command line by typing:
  (12)-"c:".
  (13)-"HB2V217.exe".
  (14): the Ultrabook of Acer seems to restart twice because it flashes the BIOS and gives you a course.
  15-) after it's all done, restart the Ultrabook and enter the BIOS to check the version of your BIOS is now new and correct.

  There is probably an easier way to make a bootable stick with Windows on it, but nothing I tried seemed to work, so I was stuck with this complicated scheme.

  It would have been nicer if Acer had provided their BIOS image independent bootable OS as do so many other manufacturers, so you could simply image/burn the image to a floppy or CD/DVD and then Flash bootable BIOS boot media.

  In any case, thanks for your help, and maybe it helps others as well.

• HP Pavilion 15-p159na - where the keyboard backlight is set for this light?

  Can anyone tell me please where to locate the backlight on the keypad to the computer laptop 15-p159na Pavilion.  I want the backlight turns on but cannot locate this setting anywhere.  Thank you.

  This means that there are no backlit keyboard installed if you don't see the icon that I have indicated in the following image. Normally, the icon will light when the backlight is off. There is no way to activate or disable the backlit keyboard in BIOS.

  

• BIOS setting where in Hp 110-3100

  Where is BIOS setting located in Hp 110-3100 Windows 7 starter. I want to set my BIOS to boot to start initialization with a collection device external n. help me.

  Usually you hit the Del key several times as soon as you turn on the PC to access the bios screen

• How to enter the IdeaCentre Q700 BIOS setting screen?

  How to enter the IdeaCentre Q700 BIOS setting screen?

  Tried F1 and there is no setting in the BIOS.

  Thanks for any help!

  Hi and welcome to the forum!

  Lenovo's Manuel said:-

• I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Error: 0 x 80070005 access denied.

  I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Now, I am trying to perform an action that requires me to use the program of scheduled tasks. I have problems with passwords and user ID. It defaults to the Userid of the machine number/administrator. I put the password when asked, but I was rejected when I finished to complete the scheduled task that I perfom. The scheduled task, I wanted to do was simply to have iTunes launch and play a song both partiucular. After completing all the details, I must click on 'Apply' or 'OK' and then I get an another dialog box asking that I get the password once more. I enter the password I put at the beginning when the application Assistant came on - but I get access denied - and the error number 0 x 80070005. Help, please. Thank you. * E-mail address is removed from the privacy *.

  original title: "error: 0 x 80070005 access denied."

  Hi HaikMuradian,

  For this particular issue, there is a fix available, you can contact Microsoft Customer Service & provide article 904423 which contains the fix.

  Reference: Error message: "0 x 80070005 access denied. You are not authorized to perform the requested operation"

  Hope the helps of information.

• Upgrading the BIOS on Aspire V5-471 in Windows 7?

  Hi, I recently bought an Aspire V5-471.

  The first thing I did was to get rid of the operating system pre-installed catastrophic (Win8) and 'upgrade' to Win7. Then, I installed the drivers and am currently creating apps and everything.

  So I wanted to update the BIOS, downloaded, but when I try to run Update.bat, apparently I can't. It gives me this error:

  

  Please upgrade to the same type of BIOS (v2.x)
  
  ERROR 235 - check OEM has no BIOS service!

  By using a utility that I discovered that my current BIOS is V2.15 since 12/21/2012. The two BIOS available for download are newer than this and I do not know what changes have been made, but I wanted to just keep you all updated.

  Apparently BIOS for Win8 comes from the v2.x series, but I'm on Windows 7, so I think that I would not install this. (and there is the version 1.x series that is more recent than the v2.15 I)

  What should I do?

  Thanks in advance.

  Yes, you can install the legacy BIOS * today *- but I suspect that is simply because MS didn't limit their market! Tomorrow will be another case, once that most machines have the UEFI on board. I and many others, am firmly of the opinion that the main goal is to lock down the operating system in the same way that Apple have. When / if this happens, need you a UEFI BIOS and most certainly "secure boot". If I'm just paranoid or not (and I'm not) you can do well to keep your UEFI BIOS in particular because it is more than happy to run Win7.

• where the head is set jack on the wi fi xoom

  where the head is set jack on the wi fi xoom

  Edge of the device (in landscape orientation) above the upper screen, should be single hole on that side, as it is a 3.5 mm jack.

• I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.»

  from scratch

  I had to pull the battery on my dell p.c.Now I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.» My screen there "list of questions and I n" t have the answers, it is a PHOENIX, I care. Can anyone help?

  Follow this. It should guide you through the configuration of your BIOS.

• BIOS setting after the installation of the motherboard on HP Pavilion slimline 3620

  I just installed a new motherboard and now I need to know if I should change any BIOS setting or something else before I can use it.  All I've done is taken in and turn on, then press F10.

  Check with HP.

  http://welcome.HP.com/country/us/en/support_task.html

  HP drivers and downloads at the link above.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP.

  http://h30434.www3.HP.com/

  HP forums.

  If you put a different motherboard in, you will have problems.

  You must proceed jointly with HP.

  The installed operating system drivers are related to the original motherboard.

  See you soon.

  Mick Murphy - Microsoft partner

• dcd5800 sff desktop PC: dc 5800 sff I m not able to change the bios setting

  How to get the password of the bios

  as I m having dc 5800 sff f10 bios password I forgot kindly help as I not able to change the bios setting

  Updated the BIOS will not clear the password.

  You can try pressing and the little button cmos clear yellow with the jumper removed password and see if that does anything.

  I think that the motherboard has a problem because removing the rider of P/O should have removed the password.

  Now turn you on the PC with the jumper removed, correct?

  You turn off the PC and unplug him.  You then remove the jumper P/W and then turn on the PC.

  That's when the P/W should be cleared.

  Then you shut down the computer, unplug and replace the rider of P/W.

• The PowerEdge 2600 bios setting

  Hello

  My server lost power over the weekend and cannot initialize case cannot find devices.

  All bios setting missing includes date and time.

  Here's what I've done but not success. My server has RAID with 3 hard disks.

  First of all in the bios integrated devices was off, so I changed it to SCSI, and computer starts, but crashed on blue screen.

  Then I changed to SCSI in RAID and got message cannot find the device again.

  I'm sure that my hard drives has been fixed to plunder so I hit ctrl-m for configuration utility and find 2 logical drives witch are correct, but all 3 physical disks in raid 0 ch are fail.

  I just want to know how can I save my data, please help.

  If all your disks are failed, then you will need to force both of them online. IF you're sure that no. disks have failed before the blackout 100%, then you can force online TWO disks (assuming that it was a 3-drive RAID 5). If you are not 100% sure that some drives have failed before the failure, then forcing online two poor readers can corrupt/destroy your data.

  First thing to do: CTRL-M start and go to configure, view/Add. If you are prompted to choose between the disc and the NVRAM views, see what each lists the configuration. Do NOT save a configuration until you have seen them both and you will receive instructions on how to proceed.

  You may be able to get direct help, in real time and free of charge by calling Dell technical support line, which must offer support on older machines. (In the case of United States / Canada.)

• The Windows BIOS setting tool - function?

  In files available for the ThinkStation E20 download BIOS update, there is a "Windows BIOS Configuration Tool".

  What is the function of this tool?

  Thank you.

  It allows two or more identical systems copy the BIOS settings one time of administrators of another economy trying to figure how to put up several identically option by option systems.

• How to set vm-description/notes and get the name of the data store, where the virtual machine

  Hello guys,.
  I have vCenter Orchestrator 4.1.1 build 733 installed and it works fine, but I need your help for the following two issues:
  (1) I want to put the description/notes of a virtual machine using a workflow. But I have not found any API useful to create this workflow (I don't want custom attributes, see attachment for details).

  (2) how can I get the name of the data store, where the virtual machine? I need this name for a workflow.
  I need your help.
  Thanks in advance!

  With regard to the notes of the VM, the following code (see enclosed package) can do this:

  var oldNotes = vm.summary.config.annotation;
  If (oldNotes == null) {oldNotes = ' ' ;}}
  System.log ("Notes of VM current:" + oldNotes);
  Now put the new notes:
  Start by creating a context
  Context of var = new VcVirtualMachineConfigSpec();
  Update the annotation with the new value property
  configSpec.annotation = notes;
  launch the task to reconfigure the virtual machine with the new context
  NOTE: This is sure to apply with a virtual machine under tension
  var task = vm.reconfigVM_Task (configSpec);

  And, in what concerns the VM information, take a look at the workflow of the library: \Library\vCenter\Virtual Machine management\Others\Extract virtual machine information