How to draw a smooth line (small in some places, in others) like in this picture

Similar Questions

• How can I draw a smooth line?

  I would like to draw a few smooth curves on one of my photos.  I tried the regular brush tool, but my mouse skills are not good enough to get some nice smooth lines.  Is it possible that I can draw smooth lines short buy Illustrator?

  The workaround in the elements is:

  1. Open an empty layer above the background
  2. Access the Brush tool and draw a straight line in the vertical axis. To do this, click a starting point for the line to the left, hold down the SHIFT key and click the desired end. You should see a straight line.
  3. Go to filter > distort > shear and on the grid of the dialog set the curve
  4. Press CTRL + T to bring up the transform tool, turn the curved line and refine following suit.

• How to draw a bright line transparent effect

  Hello

  I'm trying to draw a white line bright through an image but stuck with how to get the effect.

  That's what I've done so far:

  

  That of what I'm trying to accomplish but line is straight:

  

  Thank you

  instead of treating your mesh as a subject in its own right with its own colours, think that it is simply something that changes what you have underneath. Just use gray with different opacities and blending modes (multiply for the shadows, screen for highlights.

• How to draw a straight line and write on areas colored with Photoshop?

  I need to be able to draw a straight line and write about areas that I colored. I could do in PhotoStudio, but I don't know how to do in Photoshop.

  Use layers.  Text for writing on areas layers.  They can be changed.  You can change the text, font, size, color, Position, fusion and opacity and a layer style can be added.

  To draw the limes add a blank layer.  Select a brush and the color.  Left-click on one end of the line you want to draw. So without and the button to move the cursor to the other end of the line and press SHIFT + left.  Photoshop will draw the straight line between the two points that you clicked on.

  

• How to draw a horizontal line

  Hello
  I have a region with 20 columns +, I want it divided into two sections and draw a horizontal line. I don't want to create another region. I have trired to add Stop 'and Start HTML table' but could not figure out how to draw the line.
  Can someone please advise?
  
  Thanks in advance
  Aali

  Hello

  you're right, create a new breakpoint and start HTML Table (label poster only)
  middle of your articles and seq number 30 means 30.1 like this
  and the label

• How to draw a cross line?

  <-cross Line

  Hello.

  I want to draw the cross-line using JavaScript.

  I can draw this line.

  app.activeDocument.graphicLines.add (not defined, not defined, undefined, {geometricBounds: [100,100,300,300]})

  but I can't draw this line.

  I tried to ' geometricBounds: [300,100,100,300] and [100,300,100,300] "but he did not.

  I tried to apply the transform option but line moved.

  It moves once again, but I want to simply left and right rollover.

  Any ideas?

  Thank you.

  Hello

  Try this out.

  var myLine = [];
  
  for (var j = 1; j <= 2; j++) {
          myLine[j] = app.activeDocument.graphicLines.add();
          myLine[j].strokeColor = app.activeDocument.colors.item("Black");
          myLine[j].strokeWeight = 0.75;
          }
  
  plotStraightLine(myLine[1], 100, 100, 200, 200);
  plotStraightLine(myLine[2], 200, 100, 100, 200);
  
  function plotStraightLine(obj, x1, y1, x2, y2) {
      obj.paths.item(0).pathPoints.item(0).anchor = [x1, y1];
      obj.paths.item(0).pathPoints.item(1).anchor = [x2, y2];
      }
  

• Help please. My spry menu bar font sizes are smaller in some pages than others.

  My spry menu bar font sizes are smaller on some pages compared to others. I can't understand why since I am referencing the same file of sprymenbarhorizontal.css on both pages. I am new to dreamweaver and HTML. Help, please.

  I'll post my code if someone tell me how do.

  Hello

  You can use a different font instead of '%' in px size in your "sections" like I did (12px was that my choice to see what is happening. Of course you can use all the other sizes):

  1. in the present case:

  UL. MenuBarHorizontal
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font size: 70%; * /
  cursor: default;
  Width: 865px;
  }

  2. here:

  UL. MenuBarHorizontal li
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font size: 70%; * /
  position: relative;
  text-align: left;
  cursor: pointer;
  Width: 168px;
  float: left;
  border-bottom: 1px solid #660066;
  border-right: 1px solid #660066;
  border-left: 1px solid #660066;
  border-top: 1px solid #660066;
  }

  3. in the present case:

  UL. MenuBarHorizontal ul
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font-size: 100%; * /
  z index: 1020;
  cursor: default;
  Width: 164px;
  position: absolute;
  left:-1000em;
  }

  Hans G.

• How to draw columns not lines of the spreadsheet?

  Hello world

  It is probably a fundamental issue; But how do I make a data column of graphical waveform drawn rather than data on line?

  I have a spreadsheetwith 6-columns/channel data with approximately 120 000 lines (file .lvm)... I can convert the 2D table to draw; but this screw with my logic when indexing tables etc...

  Do I have to use the XY Chart and manually bring the plot?

  All responses are greatly appreciated.

  Thank you

  Jack

  If you wire a 2D table in the graph, there is an option to right click on the chart to transpose the table for you.

• How to draw parallel curved lines in Illustrator?

  

  I am completely new to Illustrator. I looked at a few tutorials about it.

  I want to create a bunch of parallel curved line in illustrator as circled above, however, it is quite confusing because how do.

  Can someone guide me step by step?

  In fact the part circle of your example is just a unique, path path, so we really don't know what you want in terms of "parallel curve."

  In any case, a specific way to get parallel lines of any kind is using delay of path.

  Also use the pen to draw a path:

  

  With she is selected, choose object > path > offset path.

  Enter a positive value. Note that when you use the offset path on a path (as opposed to a closed shape), the offset goes 2 ways.

  

  Use the direct selection (white arrow) to select the unwanted bits and remove them:

  

  Leaving just the original path and its new parallel path:

  

• Make smooth lines

  OK, so I just started with photoshop so I can miss something obvious here, but I'm adjusting my brush tool so that it has little weight on it to help smooth out the lines. In the past, I've always used Gimp to draw and he had this function directly on the Brush tool and do more simple lines (see on the left). Is it possible to do this in photoshop aswell?

  

  Photoshop is not brilliant at drawing nice smooth lines because of its pixels edition of origins. It cannot easily reproduce the curves you can get with programs like Illustrator drawing because the lines are not mathematically derived, instead, it sets out just of pixels. You will get a better result by using the tool on the fly pen and then trace the path as shown above, but is not the same as any drawing on a canvas. Generally, the softer the brush you use smooth the trace will be to look at, but at the price of seeks don't pointed not.

  If the very smooth brush strokes are important to you, there is a tool called Nezumi lazy Pro. I would say its proximity of necessary if you are a professional graphic designer, as he completely solved the problem. Problem is it's not free, but not very expensive is around $35. Here are two curves drawn with a mouse using exactly the same brush settings. As you can see smooth LNP off sharp edges when there is a change of direction. It also works with happiness with a mouse it really is designed for smoothing production of tablets and is very good at handling sensitivity much higher pressure actually to what you get with drivers from manufacturers only. If its purchase value depends on how much of this kind of thing that you do, but there is a 14 day free trial. http://lazynezumi.com/

  Hope that helps

  Terri

  

• Bought the creative cloud Adobe $ 20 / month, but I do not know how to draw in it. [was: Please help me... totally lost I think I want a refund.]

  I bought the creative cloud Adobe $ 20 / month, but I do not know how to draw in it. I don't have any other products Adobe or Photoshop?

  All said 'CC', but I can't find Photoshop Elements or CS6. Mine is broken? I bought it directly on the site of Photoshop, but I'm so lost. I tried following tutorial, but that does not open the drawing program. On deviantart, it says that I need to buy the product for $80 and pay a monthly fee on that as well as keep the CC $20 of Adobe to use drawing software? I wasn't aware of this how can I get a refund.

  Hi Corinne,.

  Creative cloud has no Photo Shop elements.

  You can get the version of CS6 from here: download and install creative Cloud applications .

  Concerning

  Stéphane

• How to create a black line around a photo in a slideshow?

  How to create a black line around a photo in a slideshow? For this photo I made in Photoshop, but is there a way to do it in Muse so I didn't need to adapt to all images?

  

  Hello

  You can select the Image of hero and apply the stroke to the toolbar, as shown in the screenshot below.

  

  Please let me know if you are talking about something else.

  Concerning

  Vivek

• How can I draw a curved line?

  Sorry for the inconvenience, but I tried the Photoshop information and could not succeed.

  What should I do to draw a curve?  I have no problem, draw a straight line, it's pretty easy, but I was not able to find a way draw curves and get the same results to draw a straight line.  I tried to work with the Pen tool and I could draw some curved paths, but as I said that a path is something abstract, I can't work with it as a stright line.  I m pretty sure that the answer is simple, but I was not able to understand.  Can someone help me please?

  Howdy.

  But, how can I caress a path?

  To create your path, click on the button "Create a new path", second from right at the bottom of the garbage can. Select the pen tool. Draw your way. Click on the small triangle at the top right (highlighted). Select the path of the path.

  

  Select an option for how you want to stroke the path. I chose the brush. Brush properties are applied to the way such as a stroke.

  

  That's all. It will be useful.

  Peace,

  Lee

  PS: Semaphoric: did not know the shortcut. Thanks for the tip.

• Graphics.drawText: How to draw a line of text with words in different colors?

  BB OS 5.0.0

  I'm watching the documentation of the API for graphics and I can't determine how can I use Graphics.drawText to draw a single line in two colors.

  I get the content from the server and in my class that extends the field, layout and painting methods. In the paint method, I need to use drawText to paint the contents from the server in two colors, such as:

  New coffee blends available at the counter & - 1 hour ago

  I thought that the following drawText could be useful, but I don't see how I can use it with two colors. Ideas, samples or advice would be greatly appreciated.

  public int drawText(StringBuffer aText,
                      int aOffset,
                      int aLength,
                      int aX,
                      int aY,
                      int aFlags,
                      int aWidth)
  

  You will need two calls drawText, each following a call setColor for the font you want for this particular piece color.

  In order to calculate the offset x from the second drawText compared to the first, use font.getAdvance (firstString) (where the police is your graphic police present, accessible via graphics.getFont ()).

  Use simple methods and you will get your results faster.

• I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  Yes, Acrobat Pro XI and standard have this ability.
  There is the comment > Annotations > online tool.
  There is the comment > Annotations > tool bar.

  In the Properties dialog box for one, you can select a desired color (i.e. red).
  So, in properties, you can check a choice to make this the default value of the tool.

  Basically, all versions of Acrobat (including the new "DC") offer this feature.

  If you work with a scanned image that has been placed in the PDF don't forget to use the OCR to get an output of a 'real' text - Acrobat provides a feature of OCR.

  Be well...