How to draw lines on a map with CS4

Similar Questions

• What should I use to draw lines on a map?

  Is it a drawing of the tool that you can attach to your computer to draw lines? The cursor is not precise enough to draw lines on a map (jpeg). Is there a tool I can buy and fix to draw on my screen using PS?

  Thank you post again - I recommend no doubt using the pen for what you are trying to do. Trying to map free hand lines is very difficult, but the pen tool offers precise control. I have outlined some steps for you to follow below.

  1. open your image and select the Pen tool from the toolbar, as shown below.

  

  2. I would recommend zoom in your image to make it easier for you to track on the lines of the complex plane. To do this, select view > Zoom In, or hitting "control +" (Windows) or ' command + ' (Mac) on your keyboard.

  

  3. then create a new layer by clicking the new layer in the layers panel, as shown below. Draw your lines of card on a new layer to preserve your original map image in case you make a mistake or want to start over.

  

  4 using the Pen tool, tracing on the lines of the map of your boot image. Here I begin to Bellevue and suite I90 to Ellensburg. Using the tool pen takes some practice. To get detailed help about how to use the pen tool, watch videos of Terry White I linked in my previous post.

  

  5. Once you have finished tracing over the lines of the map, go in the tracks Panel by clicking on the "Paths" tab in your layers panel.

  

  6. in the tracks Panel, click the icon of the path highlighted below. This caresseront the way you created using your most recent Brush tool settings - I will go into this more again to the next step.

  

  7. you can see that the way that I created with my pen tool has been rubbed with yellow and aligns very well with the original line of the card. You can change the size and color of your run by selecting the Brush tool in the toolbar and clicking the tools described below.

  

  8. when I have to zoom out, you can see I have drawn precisely the line of the card. I did it very quickly so with patience, you can create extremely accurate map lines.

  

  I highly recommend watching the video of Terry White on how to use the pen tool. The pen tool is the best way to create very relevant and precise lines apart from the purchase of an external drawing tablet.

  I hope this has helped! Good luck!

• draw lines on a map in paint

  Hello

  How to draw a line on a map in the painting of windows 7 with the line tool?  in older versions of paint, I could draw a line and click and then move to the next area.  in windows 7, I can draw a line, but there are two white dots at each end.  I clicked, double clicked, right click... nothing changes.  the only way to get the line to stay on the plan is to stick and the back arrow.  If I paint multiple directions on a map, it gets old fast.

  so, how to draw any line of the size of the point a to point b and he can stay?

  Thank you

  After experimenting with the whole program, I can now draw lines and place them where they should go on any card.  He just took the time to experiment and try different methods.

• How to draw lines of road as seen on Abbey Road

  Another fundamental question here!

  I'm looking for info on how to draw the lines of the road to make a parody of Abbey Road.  Here are some examples:

  http://www.RedBubble.com/people/Sviz/works/1790797-British-blasphemy

  version http://www.RedBubble.com/people/soulthrow/Works/8143115-Beatles-Feat-Dr-Who-mash-up-bandw-

  http://www.RedBubble.com/people/retrolink/works/3598471-storming-Abbey-Road

  I tried google and everything and can not understand. Illustrator is the right software for it or do I have to use Photoshop?

  Thank you

  Mary

  Yes, you can use Illustrator or any similar program. Above all, use the pen tool.

• How to draw lines with hard edges?

  When I draw a line in photoshop creates a Fuzzy contour autour the line that does not when I draw le line in the paint . How to make J’ai achieve the same solid line in Photoshop?

  Thank you very much!!
  

  Photoshop

  

  Paint

  
  

  For the effects of stairs turn off anti-aliasing when you use the tool online

• How to find all the same color in a drawing line and replace it with another color?

  Hello, I would like to replace this goat - puke green color with 'black '.

  I tried everything, but can't find the right command. I'm sure that nothing could be easier, but I'm stumped and will probably slap me in the head when I see the answer.  lol Please help.

  See you soon. -Frank

  

  CTRL-SHIFT-u (windows) cmd-shift-u (mac) - desaturates

  CTRL-i (Windows) cmd - i (mac) - reverse

  CTRL-l (Windows) cmd - l (mac) - levels

  In the levels dialog box there are three triangles in the Middle window, drag the triangle to the left to the right until your text is completely black. Oh yes, it also takes your black and white background BTW the effect of the command reverse makes it.

• How image card lines on a map

  How can you get lines map image on a map of the State? Here is an example of a card that I want to use with lines of panoramic. I want the hyperlink to pages using Dreamweaver.

  

  You need to export in the form of "layers" of photoshop first. This will create a separate files for each of the layers (lines & card separately).

  You can then use the tutorial link I gave you to the 'layer' these images upward in an area of your Web site. You can link images with lines anywhere you want.

  However, for starters, you can use the polygon hotspot so that it can work. Maybe later when you have time, take a look at the tutorial reference that I posted.

• How to use the Windows character map with the Arc keyboard?

  When I "Select" and "Copy to Clipboard" character as a checkbox and then enter any rich text field, it is for some unknown reason, out with the bad temper, that I did not choose. I don't think it's related to the Arc keyboard fault, since I do it only with my mouse ArcTouch.

  My "copy to clipboard" feature has always worked well in the past until I installed this Arc keyboard and the copy function continues to operate properly with anything but Windows XP Pro SP3 32 Character Map.

  So I want to try to enter a character by typing the standard code for the character... but the Arc keyboard doesn't have a "Numlock", because it does not have a dedicated digital keyboard and by the statement, you cannot use the number keys "at the top".

  "Product Guide" for the Arc keyboard is not very useful except on how to plug it in 28 languages.

  Is there a work around these two examples?

  Thank you.

  Someone told me that you can not add whatever it is wiped from the map of characters in a field of type text such as Notepad, that she must be rich text applicable as Wordpad. Not true..., I guess?
  Oh well, it's here where I got to go to... [Is it safe? [I'm going to cross that off my list].

  I forgot to say in the last post, & slipped a character of the fonts map does not either, on most of the trials if he drag & drop is of course the bad character and it is not just "Wingdings", but several I tried.

  When you say "characters in some fonts like"Wingdings"and"Symbol"will not display properly if changed to a different font - even if the code is correct."

  Can you help me understand what that means or how that could happen or what I can do to change the font?

  When I choose a check mark in the Wingdings font and then enter it here, it's: [u]. I don't know I wasn't looking to change police in Wingdings to something else between selecting and placing it here.

• How to remove line before Panel table with databases?

  Hi friends,

  I created the table creation of database for the list of users. Which works very well. And I also recover data that is I've stored previously and I have displayed in table format on the front. Now, I want to delete a whole line, is not a wise order, for example, now, I have a table, there total 7 rows and 5 columns. Now, I want to delete the 3 rows using by selecting the line (i.e., click anywhere in this line and press the button) that day that the rank will be remove from the database. Then remaining will again store in the database.

  I want this way is it possible or not?

  Thanks

  Concerning

  Joel M

  India

  Note: I use the LabVIEW database connectivity toolkit

  Database: Ms access

  Sorry for my grammatical error

  arun575 wrote:

  Hi friends,

  [...] Now, I want to delete the 3 rows using by selecting the line (i.e., click anywhere in this line and press the button) that day that the rank will be remove from the database. Then remaining will again store in the database.

  Instead of storing data in the database, simply remove the record that you have removed from your FP indicator and recharge the light on the database.  (The first column in my database is named ID - autoindexed, the primary key)

  

  EDIT - only sub blue-vi is https://lavag.org/files/file/60-array-point-to-rowcol/

• How the NI9263 binary code is mapped with output voltage?

  In the specification of NI9263, he says he is 16 bits and has a range of +-10V output. Does this mean that the 16-bit extends the range of - 10V to + 10V? I don't need one bipolar output, so that means that I am limited to the resolution of 15 bits, if I want to, for example, only output 0 - 10V?

  Hi kingman.

  I made a mistake, I checked the 9263 specifications and this device is set to +-10Volts. However, if you set the interval of output from 0 to 10 Volts, you still 305.2 uV as a detectable change.

  Carmen C.

• laptop HP pavilion 17 64-bit: draw lines on your desktop

  can someone explain how to draw lines on the desktop? I am currently working on a project that requires lines to be drawn on some of the pictures on the desk. to make things more complicated, I don't use a mouse, and my computer has not left and right click buttons! He has a very sensitive touchpad, so there is not to hold a left or right button as possible on most computers. so, for the moment I tenderly your help there, to try to solve this problem. If there is a solution, that is! I have to admit that this is something new for me, but you live and learn to do not you?

  Thank you very much in anticipation.

  Glad to hear the clicks of mouse work for you about the graphics program, it seems that you need something which will give you a fairly accurate line length measurement while you draw the line is - that correct? Photoshop Elements can meet your needs. In my opinion, it costs about $80.

  In Photoshop Elements, while using the online tool, it gives you a measure of angle in real-time and (to the thousandth inch) length of the line you draw. Here is a picture to demonstrate:

  

  Only a slight glimpse of the line appears while you actively draw, then the complete line appears after you release the mouse button. You can customize the line to any desired pixel width. Each new line creates a new layer 'Shape' on top of your image, which can then be resized or moved or otherwise handled, according to the needs.

  I hope this helps. Your assignment seems deceptively simple please let me know if there is anything else I can do to help.

• circles and drawing lines

  How to draw lines and circles? Thank you.

  Using various annotation tools available under the comment Panel.

  We sea, Sept. 23. 2015 00:48, peterg21588935 [email protected]>

• Hi - I am trying to draw an irregular shape (series of straight lines) and fill it with the color... How can I do this?

  I need to draw a shape irregular, closed, which is a series of joined lines and fill it with the color, etc., I can only see square, polygon, etc...

  Any suggestions?

  You can set the polygon tool to 3 sides, or use the pen tool.

• After effects issues globally with draw lines?

  If anyone can help, that would be great. I am so ticked off that I'm about to throw my entire project and give up!  I spent all day on a problem and I give up.

  I created a road map in Illustrator.  It is a very large file since it is a set of State - so it is very detailed.  I want to put this in AE and then at æ draw a line of road along the roads to show the viewer how to drive the road.  In some cases, the map will be zoomed on an area to show the way in a box.  In others, I want to show the whole of the State on the screen and to chart the road through the State.

  In practice, I had a problem with that with my tests.  However, now that I use this large file have, it won't work.

  First of all, the line shape layer is either too broad (is 2.0px 3 "wide on my screen, so I have to take it down to something as 0.1 to make look it correct), or the line will not remain with the layer when I have parents it 3D.  I would like to draw the line (route), then move the model (or a camera) to look more like the mapping in 3D.  I've tried the camera, too, and nothing works.  Even when it seems that I can draw the line, I can't click anywhere near the last point without catching the last point, which does not follow the roads.

  I think only it is something with the size of the map of the State, the terms of AI?  But I do not understand how this can be resolved.  Help, please.

  Scott

  Easy: duplicate the Illustrator file.  Give a new name and open it.  On a new LAYER of Illustrator - not a form or something like that, but a whole new layer - create your itinerary.  Now, throw the other stuff in the trash.  Save the new file in Illustrator.  Fact.

• I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  Yes, Acrobat Pro XI and standard have this ability.
  There is the comment > Annotations > online tool.
  There is the comment > Annotations > tool bar.

  In the Properties dialog box for one, you can select a desired color (i.e. red).
  So, in properties, you can check a choice to make this the default value of the tool.

  Basically, all versions of Acrobat (including the new "DC") offer this feature.

  If you work with a scanned image that has been placed in the PDF don't forget to use the OCR to get an output of a 'real' text - Acrobat provides a feature of OCR.

  Be well...