How to remove line before Panel table with databases?

Similar Questions

• How to remove the scrollbars Panel sub with LabVIEW 2009 SP1?

  I did a search and found this thread on the subject: http://forums.ni.com/t5/LabVIEW/subpanel-scollbars-in-labview-8-0/m-p/284503/highlight/false#M149983

  I double checked that the horizontal and vertical scroll bars have not been successful in the appearance of window customize and they were not retained as shown in the image below.  You see scroll bars villain in the façade of the image at the bottom.  Of couse, since the code / sw cannot be shown, it has been repainted but you can still see the scroll bars along the frame of the side panel.

  Custom window appearance settings:

  

  Scroll bars appear at the bottom & right panel sub frame

  

  Found the solution...

  Right-click the scroll bars and select horizontal scroll bar and select always off.

  Repeat the procedure for the vertical scroll bar.

  

• How to join this per_rating_levels this table with query table.

  Dear all,
  
  Guide how 2 join me per_rating_levels this table with query because, I want 2 see the per_rating_levels.name against all employees.
  When I join this table with query it shows several recording/cortion against this record.
  
  Query:
  
  SELECT
  PAPF.full_name employee_name,
  papf1.full_name supervisor_name,
  WOMEN'S WEAR. Employee_number,
  
  hr_general.decode_job (PAAF.job_id) job_name,
  Department of hr_general.decode_organization (PAAF.organization_id),
  PC.Name, PCE.Comments EmployeeComments,
  (by selecting pce1.comments in per_competence_elements pce1
  where
  PCE.assessment_id = pce1.assessment_id
  AND pce.competence_id = pce1.competence_id
  AND pce1.object_id = pce.object_id) ManagerComments;
  
  --(sélectionnez rtl.name dans rtl où les pc.) RATING_SCALE_ID = rtl. Name RATING_SCALE_ID)
  
  
  OF per_all_people_f women's wear.
  per_all_people_f papf1,
  per_all_assignments_f ADP,
  PA per_appraisals,
  pat per_appraisal_templates,
  per_assessments not,
  per_competence_elements pce,
  per_competences pc
  
  
  WHERE papf.person_id = paaf.person_id
  AND paaf.supervisor_id = papf1.person_id
  AND paaf.primary_flag = 'Y '.
  AND pa.appraisee_person_id = papf.person_id
  AND pa.appraisal_template_id = pat.appraisal_template_id
  AND pa.appraisal_id = pas.appraisal_id
  AND pat.assessment_type_id = pas.assessment_type_id
  AND pas.assessment_id = pce.assessment_id
  AND pce.object_id = papf.person_id
  AND pce.competence_id = pc.competence_id
  AND trunc (sysdate) BETWEEN papf.effective_start_date AND papf.effective_end_date
  AND trunc (sysdate) BETWEEN papf1.effective_start_date AND papf1.effective_end_date
  AND trunc (sysdate) BETWEEN paaf.effective_start_date AND paaf.effective_end_date
  
  - AND papf.employee_number =: p_employee_number
  - AND pa.appraisal_date =: p_appraisal_date
  - AND papf.business_group_id =: p_bg_id
  
  order of papf.employee_number
  
  
  Concerning

  user10941925 wrote:
  Dear all,

  Guide how 2 join me per_rating_levels this table with query because, I want 2 see the per_rating_levels.name against all employees.
  When I join this table with query it shows several recording/cortion against this record.

  '2' in your question means "to"? If so please do not use text instant message in this forum.

  Now I suppose that PRE_RATING_LEVELS is a table in your application. And you are trying to include this table in an existing query. But in doing so, you have found the Cartesian product, correct?

  In fact, how do you think someone a public forum without any knowledge of your table and data structure could help you?

  Lets see, here's your query. I formatted.

  
  select papf.full_name                                       employee_name
       , papf1.full_name                                      supervisor_name
       , papf.employee_number                                 employee_number
       , hr_general.decode_job(paaf.job_id)                   job_name
       , hr_general.decode_organization(paaf.organization_id) department
       , pc.name                                              name
       , pce.comments                                         employeecomments
       , (
            select pce1.comments
              from per_competence_elements pce1
             where pce.assessment_id = pce1.assessment_id
               and pce.competence_id = pce1.competence_id
               and pce1.object_id = pce.object_id
         )                                                    managercomments
    from per_all_people_f        papf
       , per_all_people_f        papf1
       , per_all_assignments_f   paaf
       , per_appraisals          pa
       , per_appraisal_templates pat
       , per_assessments         pas
       , per_competence_elements pce
       , per_competences         pc
   where papf.person_id           = paaf.person_id
     and paaf.supervisor_id       = papf1.person_id
     and paaf.primary_flag        = 'Y'
     and pa.appraisee_person_id   = papf.person_id
     and pa.appraisal_template_id = pat.appraisal_template_id
     and pa.appraisal_id          = pas.appraisal_id
     and pat.assessment_type_id   = pas.assessment_type_id
     and pas.assessment_id        = pce.assessment_id
     and pce.object_id            = papf.person_id
     and pce.competence_id        = pc.competence_id
     and trunc(sysdate) between papf.effective_start_date  and papf.effective_end_date
     and trunc(sysdate) between papf1.effective_start_date and papf1.effective_end_date
     and trunc(sysdate) between paaf.effective_start_date  and paaf.effective_end_date
  order
      by papf.employee_number 
  

  Now, you want to add the PRE_RATING_LEVELS in the list so that you can use the column NAME.

  First thing you need to do is to determine the relationship between PRE_RATING_LEVELS and other tables. A relationship can be

  1. one on one
  2 one-to-many
  3. - to-several

  So when you tried to join, your state of health has resulted in 2nd or 3rd type of relationship. If you arrive with someone who knows the business and the data and find the table that could uniquely identify a line of PRE_RATING_LEVELS.

• How to remove line/address in PDF file?

  How to remove line/address in PDF file?

  Joan Willets

  Remove you it with text editing / retouching tools in Acrobat object or mark for redaction, so he gets blacked out.

  Mylenium

• How to remove a specific email inbox with the client application code?

  Hello

  How to remove a specific email inbox with the client application code?  Please suggest useful links.

  Advanced thanks.

  Concerning

  Sunil.G

  Your question is a bit broad, so it is difficult to give you details.

  First of all, you must have the ID of the original message. Usually, you get either by hanging the message when he came into the Inbox (by implementing FolderListener), or by retrieving a list of mail of enamel "Store".

  Once you have this message ID, you call Folder.deleteMessage ().

  Here, there is a laboratory of Developer:

  http://NA.BlackBerry.com/eng/developers/resources/Labs/listeningforemail.jsp

  Moreover, classes to look in the API of reference:

  Store

  Folder

  FolderEvent

  FolderListener

  Session

  ServiceConfiguration

  Message (message RIM, not the J2ME)

• JS: How to remove duplicates in a table?

  JS: How to remove duplicates in a table?

  I guess there's a simple solution...

  Hey!

  Maybe something like this:

  Array.prototype.unique = function (){
      var r = new Array();
      o:for(var i = 0, n = this.length; i < n; i++){
          for(var x = 0, y = r.length; x < y; x++){
              if(r[x]==this[i]) continue o;}
          r[r.length] = this[i];}
      return r;
  }
  

  Use:

  var myArray = ["a","b","c","c","a","d","b","b"];
  alert(myArray.unique());
  

  Hope that helps.

  --

  tomaxxi

  http://indisnip.WordPress.com/

• How to remove the extra space of oracle database column

  How to remove the extra space of oracle database column. I would like to clean up the column in the database by deleting the extra space is entered by the dataentery people.
  
  When I run the query:
  SELECT
  ROWID, C.CODETABLE_ID, C.CODEVALUE_ID, C.DESCR, LENGTH (C.CODEVALUE_ID).
  C.OBSOLETE_DT, C.RECORDSOURCE, C.CREATED_DT,
  C.CREATEDBY, C.LASTUPDATED_DT, C.LASTUPDATEDBY
  OF CODEVALUE C
  Where LENGTH (C.CODEVALUE_ID) > 6
  
  the data type is varchar2 and I would get rid of the any extra blank space added to the column. in my case, if the length is greater than 6

  Hello

  user452051 wrote:
  Thanks for the reply. Why should I have this line?

  AND codevlaue_id! = TRIM (codevalue_id) - see note below
  ;

  I just changed my post when you posted this. The explanation is there now:

  Frank Kulash wrote:
  ...
  The condition "codevlaue_id!" = TRIM (codevalue_id)"does not change the results of everything, but it can make the most effective statement if there are lines where codevalue_id is on 6 characters long, but contains no additional space. It will prevent the triggers from firing and redo the data generated.

• How to remove lines null in a matrix?

  Hello

  I have a 2D datamatrix and there are a few lines nil. My original program should recognize all zero lines and remove them. How to do this?

  I tried with the function delete of table but without success. I also tried with the functions of table OpenG but... No.

  I have attached a vi that simulates my problem. There is a zero line and I want to remove it and have a table with no rows.

  Cheers for good help!

  If you have more large data structures, you should never use of "delete table" inside a, because it requires constant memory reallocations. A better solution would be to make operations on-site and resize once at the end. Here's a simple example (8.5).

  (This solution can be optimized, but should show you the basic idea).

• How to remove lines in my vo fit two and sometimes in sound?

  Mr President

  My worm jdev is 12.2.1.

  My use case, it is that I have a VO in which I enter two lines and sometimes its due to the involvement of certain products sales tax.

  On two rows as a single line is visible to the user for which the product id.

  The second row two is hidden who have no product id.

  Now how to remove these two lines and the other in the same way that they have been inserted in two and his.

  The peak of lines is something like that

  

  Now my question is what a single line is visible to users who have IDs and product line without product id is hidden to the user in my vo.

  Then if the user click on the Remove button and then the two rows are deleted together with the click of one button Delete in the case of two lines combined.

  Concerning

  Mr President

  In fact, my goal was to remove only lines which were inserted in some and not all rank both in the join of two by vid.

  I find the solution by adding a new column in my table of details named joinrows.

  Change my code like below and at the same time only one or two lines are deleted at once in the same way that they have been inserted in the one and two.

      public oracle.jbo.domain.Number getFirstSeqNumber(String seq_name){
  
               SequenceImpl seq=new SequenceImpl(seq_name, getDBTransaction());
                  return seq.getSequenceNumber();          
  
                     }
  
      /**
       * Custom DML update/insert/delete logic here.
       * @param operation the operation type
       * @param e the transaction event
       */
      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               }
          if(operation == DML_DELETE)
              {
                deleteSecondRowInDatabase(getJoinrows());
              }  
  
                         if (getStaxrate() != null )
                                    {
          if (operation == DML_INSERT )
                     {                     
  
                             oracle.jbo.domain.Number joinrow = getFirstSeqNumber("JOINROWS_SEQ");
  
                             setJoinrows(joinrow); 
  
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),getJoinrows(),"6010010","SALES TAX PAYABLE",getCredit(),getCrname(),
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));     
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }
                     }
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5, Object value6, Object value7, Object value8)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,JOINROWS,DEBIT,DRNAME,CREDIT,CRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "','" + value6 + "','" + value7 + "','" + value8 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value8)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value8+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  
      private void deleteSecondRowInDatabase(Object joinrows)
        {
          PreparedStatement stat = null;
          try
          {
            String sql = "delete from vdet where JOINROWS='" + joinrows + "'";
            stat = getDBTransaction().createPreparedStatement(sql, 1);
            stat.executeUpdate();
          }
          catch (Exception e)
          {
            e.printStackTrace();
          }
          finally
          {
            try
            {  
  
              stat.close();
            }
            catch (Exception e)
            {
              e.printStackTrace();
            }
          }
        }      
  

  Concerning

• Need to create a new line in the table with the same data as the primary key, but new PK

  Hello gurus,
  
  I have a table with a column as a primary key, I need to create a new row in the table, but with the same data in one of the lines, but with different primary keys, focus a double row with key primary diferent...
  
  Any ideas of how it can be done without much complication?
  
  Thanks in advance for your answer.
  
  Agress,
  Karim idrissi

  user9970447 wrote:
  Hello gurus,

  I have a table with a column as a primary key, I need to create a new row in the table, but with the same data in one of the lines, but with different primary keys, focus a double row with key primary diferent...

  Any ideas of how it can be done without much complication?

  Thanks in advance for your answer.

  Agress,
  Karim idrissi

  something like

  insert into mytable values ('literal for new pk',
                                         select non-pk-1,
                                                  non-pk-2,
                                                  non-pk-n
                                         from mytable
                                         where pk-col = 'literal for existing pk')
  

• How to remove lines under separate Notes?

  My document has strange lines between each note - does not know how to remove them. It is not the 'rule above,' as far as I can tell. I adjusted the rule above a lot, and that affects only the line between the body of the text and the Notes section. The problem is the lines between each note. They resemble the underscores, but I don't think that's what they are, either. Kind of a rule that I don't know how to change. See:

  

  Looks like the paragraph style that you are using has a rule in paragraph below market.

• How can I set up a table with a fixed header on parchment?

  I'm trying to implement a table with a fixed header on parchment on my site of Muse. The table must scroll with main site window (not inside a box).

  Here is an example with CSS, HTML and JS code in separate windows.

  Is this achievable in Muse? If so, how can it be done?

  I saw a few threads on similar topics but have not found an answer.

  Thank you.

  Dmitry

  Yes, you can add the table by using the feature to insert the HTML code and it will still work until browsers stop supporting them. But you will not be able to pin, added the header of the table in the order of the Muse.In, to pin header in the Muse, it must be a separate object in the Muse.

  If you need to do requires a significant amount of custom coding, then Dreamweaver is probably a more appropriate tool as Muse does not support direct access to the code.

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• How to match columns from two tables with

  Hello:
  I have two tables as below:
  
  Table1::(Base Table)
  Country | Prefix | Prefix_Length
  Travel | 001 | 3
  CountryB. 0012 | 4
  PaysC | 00443 | 5
  CountryD | 0091 | 4
  
  :(Detail Table) table2
  The population | Area | Prefix
  500 | AreaA | 0015921
  1000 | AreaB | 00122
  400. AreaC. 00443743
  300. ALIS | 0091333
  100. AreaA | 001
  
  I need to match these two tables with prefix columns (whose length is not fixed in the two tables: but it starts with 00 in the two tables). Two different countries the prefix may be similar up to a certain length. Thus, Prefix_Length can be used to determine (exactly) how much time should be taken in the search of Table2.
  
  Output:
  Country | Prefix | Area | Population
  Travel | 001 | AreaA | 600
  CountryB. 0012 | AreaB | 1000
  PaysC | 00443 | AreaC. 400
  CountryD | 0091 | ALIS | 300
  
  Please help me with your valuable comments.
  
  -Tender

  Try this

  with base_table as (
                      select 'CountryA' country,'001' prefix,3 prefix_length from dual union all
                      select 'CountryB','0012',4 from dual union all
                      select 'CountryC','00443',5 from dual union all
                      select 'CountryD','0091',4 from dual
                     ),
     detail_table as (
                      select 10 no_of_call,'0015921' prefix from dual union all
                      select 3,'00122' from dual union all
                      select 50,'00443743' from dual union all
                    select 50,'00443643' from dual union all
                      select 300,'0091333' from dual union all
                      select 60,'001' from dual
                     ) 
  
  SELECT  country,
          prefix,sum(no_of_call)
     FROM (
           select  country,
          b.prefix,no_of_call,
          decode(no_of_call,lead(no_of_call,1,0) over(partition by no_of_call order by b.prefix,no_of_call),'y','n') y_or_no
    from  base_table b,
          detail_table d
    where b.prefix = substr(d.prefix,1,prefix_length))
    where y_or_no !='y'
    group by  country,
          prefix
    order by country,
          prefix;
  

  Published by: Vi on 20 February 2012 01:07

• How to draw lines on a map with CS4

  I have CS4 and would like to know how to draw lines on a map image. I'm a beginner, so what do I do?

  It's about CS6, but CS4 would be a similar process:

  Here's a way to draw a line:

  

  Select the pen tool.

  

  Make a new layer which will be placed on top of the existing layer in the map.

  

  Draw a line with the pen tool, you can see the points that I made to create curves.

  Here is more information on the pen tool: http://psd.tutsplus.com/tutorials/tools-tips/photoshops-pen-tool-the-comprehensive-guide/

  http://www.Tutorial9.NET/tutorials/Photoshop-tutorials/pen-tool-basics-in-Photoshop/

  

  In Photoshop, you have to go back to the options bar and select "shape". This allows you to place a 'coup' on the path (line) that you just created. Otherwise, it will not be displayed.

  

  You can see the settings in the Option bar above, I did. I made that Fill was placed on 'none', and I chose a color for my race, but also a point of size for the thickness of the line until its visible on my card.

  

  It comes to the final.

  Good luck!

  Janelle