How to edit a white model?

Similar Questions

• T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?

  CS6 using

  T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?

  Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.

  It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).

  Question, am I suppose to create the right design in the large rectangle?

  2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.

  What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.

  How to make the small rectangle in the large t-shirt too?

  Hello

  The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.

  (1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.

  

  (2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.

  

  (3) select the small rectangle, and delete.

  

  (4) use the Rectangle tool to draw a new in size.

  

  5) option click on the new rectangle to open a launcher. Select make Guides.

  

  You now have a guide again, larger rectangle! Let me know if you have any other questions.

  

• How to edit/author of book on this model?

  I worked out of the model BookPatch for InDesign (6 x 9, download here), and as I am kind with the ID again, I'm having a problem. I can add pages and add the text at their end, but there are these sections at the top of every page (the Red arrows) that I do not know how to edit. Adding new pages of numbers the properly at the bottom (the blue arrow), so I think that there is a way to change it once somewhere and do reflect on each page? I tried the text tool and direct Selection tool, but I'm stumped. Any help would be appreciated.

  

  It's on your A-master...

  Open the Palette Pages (F12), go to A-master broadcast and edit...

• How can I add white space between areas that contain text fields? I use Adobe Acrobat Pro DC 2015.  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these text fields to be developed and not

  How can I add white space between areas that contain text fields?

  I use Adobe Acrobat Pro DC 2015.

  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these areas to be developed and do not overlap the text and the text below fields.

  For example:

  1. 1.

  Progress/strategies:

  1. 2.

  Progress/strategies:

  1. 3.

  Progress/strategies:

  1. 4.

  Progress/strategies:

  The space between each 'progress/strategies' increasing needs. A text field is under each of them. If it's a Word doc, I could just press on enter. What is the best way to do this with Adobe Acrobat Pro DC?

  There is no easy way to do it. You need to move the text fields more apart and if there are static elements, then you will need to use the tool edit text & Images to move them, separately.

• How to edit #TEMPLATE_CSS # a topic at the 4.2 APEX?

  Dear Experts,
  
  How to edit #TEMPLATE_CSS # a topic at the 4.2 APEX?
  
  Best regards
  Mahmoud

  Mahmoud_Rabie wrote:
  Dear Paul,

  To be more precise, I have the following

  in my page template.

  I know, #TEMPLATE_CSS # is replaced with the contents of the file above.

  No, it isn't.

  As described above, #TEMPLATE_CSS # is replaced with the contents of the File URL and Inline CSS of the model properties. This feature allows the customization level of the CSS model included in the page. Try it: change #TEMPLATE_CSS # in the model:

  
  #TEMPLATE_CSS#
  
  

  Now add a style to the Inline CSS property:

  body { background: black !important; }
  

  Run the page. View the source of the page in the browser and see what happened to #TEMPLATE_CSS #...

  The question is: I (by APEX 4.2) can I update this content directly to do tasks such as adding or upgrading the CSS classes?

  Not in the way you want to say.

  URL of the file and Inline are empty (default) and ready to be used to completely replace the content of #TEMPLATE_CSS #.

  Yes, #TEMPLATE_CSS # is replaced with the contents of the properties of model File URL and Inline . Affecting not the inclusion of other information of CSS, you use the new channels of alternative CSS < link rel = "stylesheet"... > elements, or embedded statements < style > .

  Is the only solution to update/change the CSS for a theme to download CSS then paste it in the field on line (under the section the model CSS)?

  N ° if you want a custom theme, the best way is:

  1 copy the CSS theme at a place accessible in the file system (at best) or a trustee of the APEX (if you don't have access to system files).
  2. create a new theme as a copy at the APEX.
  3 change the < link rel = "stylesheet"... > references topic in the new theme templates page to point to the new location of CSS.
  4 customize the CSS (like Coda which allow locals and edit files remotely is quite useful).

• HOW TO EDIT THIS MAP

  How to edit this map? I want to remove the external news and just keep the card.

  What is not seen, is that this map is found in a background of Council of checker in PS and it's a .gif file.

  What can I do?

  

  Hi there-

  The image you are editing is a transparent GIF. The model checker that you see when you open in this Photoshop represent the pixeles transparent in your image.

  To edit the card, you must first change the colors indexed RGB or CMYK color mode. Do this by going to Image > Mode > RGB color.

  

  Now, you can take a selection tool (I use the Rectangle tool) and select areas of the image that you want to remove. Just slide your tool around an area of the image and press Delete on your keyboard. Repeat this procedure until you are happy with your result.

  

  If you want to have this image remain transparent, you can stop here and save it in a file type that supports transparency (such as PNG, GIF or PSD).

  If you want to add a background, create a new layer in your layers panel and do it below your map layer.

  

  Then take your paint bucket tool and fill the background with the color of your choice.

  

  There you go! I hope this helps!

  See you soon,.

  Kendall

• How to make blue white areas? I shot a picture and areas blue (background) appeared.

  How to make blue white areas? I shot a solid, black and white linework (background) blue areas arose. (CS3 on XP)

  Edition > fill (or SHIFT - RET.)

• How to edit clips in the AE and put back them in the body? (CS5.5)

  Okay, then, here.

  I edit my main footage in Premiere Pro. I recently bought a denoising software which is only compatible with After Effects, so I've been using the denoiser plugin in After Effects. Once I changed my basic video cut in first, I select all clips (included audio) in the timeline panel and open in a new model of EI. Once it has been opened, I do all my video major alterations in AE (for example, noise reduction). Now, when I try to export the project as a project of first Pro (PP) and open it in the first, it does not load the project. It's just an empty sequence. This isn't a big deal, because I tried something else. I tried connecting the composition of EI EI to PP which works, but it is very slow and precomposes all individual clips in a video clip.

  So, just to go on it again, that's what I did: cut clips in PP > selected all the clips in the timeline of PP and them open in a new AE comp > published the individual clips inside the model AE w / effects that are not supported by PP (only AE supports the reductive effect) > open the AE comp edited pp > then the model came as a clip video précomposé instead of individual clips.

  So, my question is, how can I get the model of EI to stay as individual sequences when I open it in PP in case I need to adjust something? Is there a way to do this? Or should I just do the very last denoise effect?

  Two other things:

  (1) I noticed that it is extremely slow in PP to render a model of EI parts... is it just because of the added effects?

  (2) I transcode my videos to the ProRes 422 format before I put it in PP. Once I put the clips in AE and then again in PP (if I figure out how), the clips will always be the same ProRes codec? I need them to be the same codec due to the adjustment of colours and effects later in the post.

  Thank you if you can answer this! ANY help is appreciated! I have explained this about as good I can, so if you don't understand my question, just ask, and I'll try to give you more information. Thank you!!

  If you go to re - edit your shots in first after the application of effects in AE, so you better make the shots in AE with handles on them. Do not try and bring in a full movie. Nobody knows what they are doing it. I even add handles to my dynamic link shots in Premiere Pro and I rarely bring along only one at a time. To add handles, the simplest method is to drag the photo to another layer in the body and extend them the entry points and. You can also change the length of the comp in AE, but be careful, what AE returns no audio tracks to first so you will lose the audio sync if you're not careful. If I have a bunch of shots that need to be addressed in AE I fucks cut into body leaving plenty of room (handles) on entry points, treat and make in AE and bring back return it in Premiere Pro and make fine cut there. Suspicion of a freebie come: you don't have to put your whole movie in a single sequence. When you do what I just described, I will often change the transformed sequence and then bring this sequence in my editing of final movie. That's how films are cut. Each Act, perhaps even each scene is cut as a separate sequence, then the sequences are assembled in the film. Nobody I know features cuts to cut the entire project in a single calendar unless they are so tied to the time that the first edition is the one that they should go with.

  Second, yes it will take organization long to make shots turned into AE with effects because you went with effects and you also now run both applications at the same time on your system. See tha first response for the solution. You will work faster if make you things in AE and then replace the film premiered.

  Thirdly, if you transcode to any codec, then make the same codec, everything will remain the same. If you are using dynamic links, then the rendering will be to the same codec for the whole of the project first. AE bit depth always process uncompressed to the project until the pixels are sent to the renderer. There is no rendering for dynamic links settings. He always uses the same rendering and compression settings used in the first.

• How to make a white sticker in Photos?

  How to make a white sticker in Photos?

  The strength of the tile has a negative value. Then the tile will turn into a White halo instead of a dark vignette.

  With an elasticity of-1,00:

  

• How to edit photos in photo file shared

  How to edit photos in photo file shared

  What do you mean by file shared photo?

  You share an album in iCloud with someone?

  To change a picture in a shared album, import the picture first of all to an event in your iPhoto library. Then you can change it.

  Or share a complete iPhoto Library with someone else?  Then see this support document: iPhoto: sharing libraries among multiple users of

• How to edit photos?

  I just upgraded to El Capitan, and can't see how to edit photos. I assumed it would be via the "Photos" application Any suggestions?

  Select the Image in the top menu bar, and then display the tools change:

  

  When you select, you will see the Edit screen:

  

  See you soon,.

  GB

• How many slots for RAM, model HP 250 G5 (W4M85EA)?

  How many slots for RAM, model HP 250 G5 (W4M85EA)?  What is the maximum amount of RAM supported HP 250 G5 (W4M85EA)?

  @Frodo9911

  Two memory non-customer-accessible/extendable module slots

  Supports up to 16 GB of RAM

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c05087748

  REO

• How can I buy iphone model A1723 - free online contract? will be model a1723 works with GSM (AT SIM cards

  (1) how can I buy iphone model A1723 - free online contract?

  (2) A1723 model Will work with cards SIM GSM (AT & T etc.)?

  Yes, you can buy it SIM free online.

• How can I know the model of my Satellite M100 series?

  just my last thought. How can I tell which model I use, it's satellite m100 series, but I still don't know what specific it is...

  Thanks for the help

  Hi Enrique

  It of very simple for this knowledge.
  At the bottom of the unit, you will find the label that provides all these useful information.
  You should also find the number start with the PSM.

  This number is important to identify your model of laptop for example
  to download driver.

• Quick help: how to make grey, white, gray lines in listbox?

  Hello

  As in the subject. How to make gray, white, gray lines in listbox?

  See you soon

  

  Apparently, Jim and I feel the same (and I need a new CTC for 2013)

  Best