How to emulate a button has been clicked?

Similar Questions

• How know what form button has been clicked

  I have a form with three buttons on it: a standard reset button, and two buttons that perform different functions that a user has clicked on validate. When I go on the action page, how can we know which button was clicked to perform the correct action?

  
  
  
  

  On the action page, do

  
  Subject S1
  
  Subject S2
  

• Check if the button has been clicked

  Hello!

  I have a small question to ask. Is it possible to test whether a button has been pressed using as3?

  I have 3 different buttons and I want to test if the right button was clicked, then the user would see the message "OK". Otherwise, if an other 2 buttons were clicked, the message would be "Incorrect".

  Thank you very much for your help!

  I solved the problem by myself!

  Thank you very much to answer, your advice was really helpful in my way to the right solution!

• I need to disable a button after it has been clicked and gave birth to a model

  I have little experience writing java script, but I'm sure I need to use java script to disable a page button Add after it has been clicked and spawned assigned model. The java script that I use to build the model is as follows.

  var expTplt = getTemplate ("tpltReport");

  expTplt.spawn(2,true,false);

  This script works very well, and I have created several identical models with different names so that a specific model is launched when you click on the page button to add on a specific page in the pdf file. This is to prevent the information entered on one page are repeated on all subsequent pages that are added to the pdf. I have rename the fields on each model to achieve this.

  Given that each model has its own page button to add, with the exception of the final model, if a user clicks several times since the same page it will generate multiple identical pages and the information repeat error will occur.

  No simple solution?

  Add the following at the end of your script until the button is the one that runs the script. A read-only setting button makes this option disabled. The event was the trigger, the target is the object that raised the event... in your case, the button, regardless of the number of times he gets renamed due to the Rogue process.

  Event.Target.ReadOnly = true;

  J-

• Detect if the time/date browse button has been used

  Hello

  I have a checkpoint vi for the indexing of the elements inside the table and shows the date and the corresponding time. I have the large number of control inside my block signals, but I removed all the blocks out of words and signal for this discussion. I replaced all the unnecessary controls with constant values, so don't waste time analyzing.

  If you take a look at my vi, you'll see Star/Stop control, control of Position and an indicator of time stamp (time waveform) with a browse button date/time of another control of time stamp. I have all the features you want, but I have the problem when you use the button browse to bring up the time. I can't put my time twice in a row to the same value as I compare value "Last entry of time" with a current comes to enter. I wouldn't completely change my blocks because I use a lot of variables and property inside my project nodes. I'm looking for a way to figure out if the time/date browse button was pressed so I could jump to the desired in my registered wave point.

  I'll skip the actual implementation of what you're doing because it's not all that clear to me and answer the question about to detect if the button has been pressed. This general question came several times before in this forum. There is no built-in mechanism to detect that the Browse in a timestamp control button was pressed. When you click this button, it actually opens a VI with the title 'Set Time and Date'. For example, you can monitor to see if this window opens.

• How to reset the button incase they click New to create the same effect?

  OK guys,

  So im at a stop of triggers on the timeline, EX: sym.stop (1000);

  Then I'm animating a click on an element div/EX function:

  SYM.$("Rectangle2Copy23"). Animate({left:'3px',height:'77'});)

  How to reset the button incase they click New to create the same effect?

  Instead the object does nothing because it is already in position.

  I would go back to its original position and recreate the same effect.

  Problem is that the timeline stops... even if I go to another point in the timeline panel

  the last position assigned by the rest effect, I want to reset it even on the same point on the timeline...

  Thank you

  First of all, you need to upgrade your board animate to 2014.1.1 to open the membership re-shared, and

  then check this out:

  Dropbox - Archive_upgraded.rar

  Note: I added jquery explicitly for use. animate(), like the last Animate edge has no dependency on jQuery.

  HTH,

  Vivekuma

• some how my windows recovary option has been delete

  some how my windows recovery option has been delete so what cani do?

  My product name HP Mini 311-1001TU.

  OPS windows 7 starter edition.

  This product is free or payable? allrady I lost my windows and bought a windows disc.

• If a logging program button has been installed on your computer performs this Act of when it is installed or is able to access the previous use of the keys?

  Hello

  I received an email from a friend that I opened, it has since informed me that his computer has been hacked and thought that a virus has been incorporated into the e-mail. I have a limited knowledge of computers and would like to know if a logging program button has been installed it reads the keys historically or only from when it has been installed? Also, I found that a user account and password that I had not placed on the computer had been set and the user account setting that governs the installation of new programs was at a minimum level.

  I deleted the new user account and password and changed the UAC to the highest setting and did a scan of my computer using AVGfree, he showed a threat of conduitinstaller.exe but it would allow me to delete or archive. A search on the internet about this program shows that it is a threat, this page: http://www.removeonline.com/conduitinstaller-exe/ offers to download a tool to remove it, but I am now worried I'm going beyond my capabilities. Could I have some advice please. I'm currently travelling so don't have do not have access to a friendly computer shop is where English is spoken.

  If I do all the work financial online from the computer in safe mode, this will get me in until I can get the problem sorted.

  Geoff

  Scan your PC with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

• Is it possible to know 'Where am I' once a field has been clicked?

  My question relates to the "Mouse Up" JS that are so often associated with a field.

  I tried this code:

  Console.println (this.) Rect);

  and the result was: "undefined".

  Then, I tried this:

  Console.println (this);

  and the result was: [object Doc]

  so, I guess I'm making progress, but I'm too high on the hierarchy of the object.

  What I need is the rect or name, or a way to determine which of the many areas with same code has been clicked.

  This kind of generalization (same code in many areas) that can save a lot of time and coding.

  TIA,

  -Ramon

  Try this:

  Console.println (Event.Target.Rect);

• The new tab button has been hijacking

  I've updated Auslogics Registry Cleaner. Companion Web of Lavasoft has been automatically downloaded and installed on my computer. He seems to have changed Firefox: whenever I try to open a new tab, the search engine Bing opens automatically in the new tab. I was able to stop this behavior by removing the choice of search engine Bing. Now my home page opens automatically in the new tab when I click on the + to open a new tab.

  I was not able to delete the Web Companion of my computer: their uninstall program that crashes!

  How can I correct the problem in Firefox with the new tab?

  Thank you.

  Maurice Brais

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  At the top of the screen is a search bar. Type browser.newtab.url
  This indicates what to show when a new tab opens Firefox.
  If you want, right click and select Edit. You can change the setting

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

  The same instructions are used to the new setting of the window, classified
  browser.startup.homepage.

  Start your computer in safe mode.

  Start the computer in Mode safe;
  Free online encyclopedia

  Open the folder of programs on the computer. Find the folder of the program
  to find and rename or delete. After that, run a scan of the registry / repair.

  Reset. All the problems?

• REQUEST: Which button has been activated?

  I have a simple application with 2 buttons (Submit1, Submit2) and a page element to display the value of the CLAIM, which I assumed would be Submit1 or Submit2.  (Now, I'm used to my hypothesis being WRONG!)  Each button has a dynamic action where I put the item posted to v ('REQUEST').  I thought I'd see the button names Submit1 and present 2 but instead I PLUGIN = 0B54D6F17CD5860103961EC845E350493785E34E863AA39398BB4C9237FC0051 and B0B98D1280C450FC46C5DC74138D31A9F574C2B48942DC8206884D980CDD9E55 = PLUGIN.   I could easily put the item on "Submit1" and "Submit2" but the point of this exercise was to see the 'name' of the button just pressed (Submit1, Submit2) in the REQUEST variable.

  WS apex_examples_01

  Demo / demo

  Application 49924, page 2 (ignore unrelated page 1)

  So is - it does not work because

  (1) those not placed in the APPLICATION, button names

  (2) this isn't the way to enter the name of the button of the APPLICATION, or

  (3) REQUEST does not work like that?

  Howard

  [Did travel Europe in the 1960s?  Each country uses a different currency, had another language, laws and customs.  Sometimes, the people were friendly; sometimes not.  [You did not assume what worked in one place would work in another.]

  Howard(...inTraining) wrote:

  I have a simple application with 2 buttons (Submit1, Submit2) and a page element to display the value of the CLAIM, which I assumed would be Submit1 or Submit2.  (Now, I'm used to my hypothesis being WRONG!)  Each button has a dynamic action where I put the item posted to v ('REQUEST').  I thought I'd see the button names Submit1 and present 2 but instead I PLUGIN = 0B54D6F17CD5860103961EC845E350493785E34E863AA39398BB4C9237FC0051 and B0B98D1280C450FC46C5DC74138D31A9F574C2B48942DC8206884D980CDD9E55 = PLUGIN.   I could easily put the item on "Submit1" and "Submit2" but the point of this exercise was to see the 'name' of the button just pressed (Submit1, Submit2) in the REQUEST variable.

  So is - it does not work because

  (1) those not placed in the APPLICATION, button names

  (2) this isn't the way to enter the name of the button of the APPLICATION, or

  (3) REQUEST does not work like that?

  All of the above.

  The documentation is very clear on this:

  The name you give a Submit button (in other words, a button with an Action to submit the Page) determines the value of the integrated attribute REQUEST when the page sends.

  Since these aren't the buttons send and the page has not been submitted, the REQUEST is not defined.

  Having the DAs pulling on the loading of the page is not help clarify what happens on one.

  Run the page 2 in debug mode, click Submit2 and discovers the debug trace. You will see that the APPLICATION is correctly set to the P2_SUBMIT2 value specified in the DA. However, as the value of the CLAIM is not seized upon presentation, P2_REQUEST keeps the false value defined by the wrong DAs.

  Very well.  There could be ten ways to get the name of the button.   But the point of my quest was: How one seizes the value of/from 'REQUEST' for display?

  Imagine the following situation as a mere 101 APEX programming exercise.

  "The REQUEST contains the name of the button causes the page to be submitted."

  Enter the name of the button of the APPLICATION and display it. »

  Doing the action of the Submit Page button and capture the value of the REQUEST in an element of a calculation after submitting or a process, or make the value of APPLICATION available on the page by setting the application & ASK. in a branch. (I prefer the latter because it does not require an additional page element.)

  See the example on page 4, which I have added to your application.

  We do a few provided invalid here?

  Yes.

  The value of the REQUEST has nothing to do with what button is clicked in and of itself, but with the behavior that is set to occur on the click event.

  Is there any complication that makes this hard to do?

  Those that you are unnecessarily in the form of DAs, etc..

• Printing of separations with the halftone in Photoshop with the SCREEN button has been disabled

  I want to start a discussion on trying to reimplement the button on the FORM to print output in Photoshop CS5 and upward as an add-on. This is a very important feature for the idustry I am.

  It is a huge disruption to the screen printing industry, as we can't easily output channels from indesign or illustrator from the file. I use photoshop to print separations for print multicolor with halftone and the button of the screen let me decided that lpi/dpi I would be out on my postscript printer. I contacted someone at Adobe, and indeed, they reported that the button of the print output options SCREEN has been removed. I want to make a petition to get this back button, that I have upgraded, and I won't be able to use the software for my needs. Thank you.

  http://forums.Adobe.com/thread/945132?TSTART=0

  You can lend your support to an existing application

  http://feedback.Photoshop.com/photoshop_family/topics/screen_function_for_separation_outpu t

• Made a change in Group Policy: how to disable: "this operation has been cancelled due to restrictions in effect on this computer" notification?

  "This operation has been cancelled due to restrictions in effect on this computer"

  There seems to be a lot of people who get this notification.  Too bad Microsoft chose not to tell us why its happening!

  Is it possible to disable this notification?  I've made a few changes in group policy limit some startup programs.  Now, I suppose that this appears when the program tries to start.  Really irritating.  Maybe there's something in group policy to restrict the notification?  Then there will be another notification telling me that this notification applies?  Laughing out loud!

  Hello

  I suggest you to ask your question in the Forum Pro Windows XP IT for assistance. We have a dedicated team to help you with such questions.

  Hope the information is useful.

• How to delete data that has been downloaded? (NOT all data)

  Hello
  
  I would like to delete data that I downloaded up to a point. I'm on 11.1.2.1.
  
  The dimensions I have are;
  
  Accounts
  Periods - FEB
  Years - 2013_2014
  -Real-world scenarios
  Versions - final
  ABCGroup
  Products
  POV - monthly
  
  I do the download via the text file and have a rules file to get the upload done. ABCGroup has several cost centers, several account codes, product codes and amounts. That's what is downloaded.
  
  Example:
  
  Real, Final, monthly publication, 2013_14, FEB
  ABCCGroup, accounts, products
  403,5732,000,-3165694.41
  
  403,7321,000,-36081516.27
  
  403,7321,101,36081516.27
  
  I would like to know if it is possible to delete all the data that has been downloaded by this text file.
  
  Thank you

  Hello

  Just do the same combination in excel add in or smart view and change the value to #Missing and send it.

  The other way is that you can write a script for the same and use CLEARDATA inside.
  Please see the link - http://docs.oracle.com/cd/E12825_01/epm.111/esb_dbag/frameset.htm?dcadevcs.htm

  Hope this helps

  Concerning
  OHS...

• How do I know who has been configured in the Listener Configuration

  4.1.1
  
  Hello
  
  I work with an APEX facility with a stand-alone receiver, but I did not configuring the listener. Is there a chance to see what path has been entered for the directory of the East during the Configuring the listener?
  
  Thanks for your help

  Hello

  You should find a line like "INFO: extraction to:...". "the newspaper of the console of your listener of the APEX. This will give you the directory where your stand-alone Instance is "hosted".
  You will find a file named apex.properties it. It contains an apex.images parameter that contains the information you want.
  Note that you can override this setting by starting your APEX headset with the additional parameter -Dapex.images = to use the location you want to use.

  -Udo