Printing of separations with the halftone in Photoshop with the SCREEN button has been disabled

Similar Questions

• The task manager has been disabled by the administrator. Is there a quick fix?

  Using Widows XP Professional, Version 2002, Service Pack 3

  Fast enough

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, since it has no Group Policy Editor in XP Home and only
  really does not tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you remember.
  something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem)

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the task manager has been disabled how to enable it?

  How can I activate the Task Manager

  How do you know if that it has been disabled? What is the exact error message?

• When I use ctrl-alt-del to do to the Task Manager I get a message that says that my access in the task manager has been disabled by the administrator - but I AM the administrator - how can I solve this problem

  This does not occur in a given program, but at all times

  First take the precaution to ensure that your computer is free from virus/malware because it is a symptom of infection.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the machine is clean, then:

  Activate the task (line 51) Manager - http://www.kellys-korner-xp.com/xp_tweaks.htm
  Lift the Restrictions - Task Manager, Regedit and CMD (line 275) - http://www.kellys-korner-xp.com/xp_tweaks.htm
  Troubleshooting of the Task Manager - http://www.kellys-korner-xp.com/xp_t.htm#tm
  http://windowsxp.mvps.org/Taskmanager_error.htm - Task Manager has been disabled by your fix administrator MS - MVP - Elephant Boy computers - don't panic!

• The task manager has been disable by your adiministrator.

  I have Windows XP.

  Problem: whenever I use the keys CTRL, ALT and DEL, task manager told me, that the administrator has disabled the Manager the.

  How can I solve the problem?

  1 first on google:

  Error message "Task Manager has been disabled by your administrator " https://encrypted.Google.com/search?hl=en&safe=off&BIW=1264&BiH=730&&SA=X&EI=KPapTP6bL8OLswa3kbWeDA&ved=0CBQQBSgA&q=Task+Manager+has+been+disabled+by+your+administrator&spell=1
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• HP Photosmart Premium All in One printer will NOT work to satisfaction with Windows 7, HP has been disabled

  Windows 7 is causing problems with photo printers?  I had so many problems the photosmart HP printer wireless installation.  Whenever it has been installed, the next time I arrived, he would say "cannot find printer.  Best buy told me to NEVER install wireless immediately and later another told me that Windows 7 seems to have problems with wireless printers.  Called HP, they wanted me to install new drivers and then I got fatal errors to try this.  Finally, they had a legal person of HP contact me to tell me that the fatal mistake had to be caused by the problem of WINDOWS 7.  I had to restore to the day, I bought the computer, which was fine because I didn't really have anything worth saving, just a few documents.  When I did, everything seemed OK but I tried to scan a picture and there were points on this subject.  I scanned the same photo to another computer not windows 7 and without stains.  New HP denounces Microsoft Windows 7... saying that it doesn't have the same problems as Vista did, but a WHOLE NEW CLASS of problems.  Why are they not being found and fixed by Microsoft problems?  It's so frustrating, I abandoned and resumed the printer at Best Buy.

  SOMEONE DOES HE HAVE PROBLEMS WITH THEIR PHOTO PRINTERS WORKING ON COMPUTER WINDOWS 7?  IF NOT, PLEASE SHARE WITH ME WHAT PRINTER/SCANNER, YOU HAVE, I WANT TO BUY A SIMILAR ONE.  I won't buy another HP for what, the customer service was poor, 12 hours on the phone and nothing has been resolved but blame Microsoft.  Life is too short.

  Have you tried the printer connected directly to the computer to see if it works correctly? This can help to identify what you need to solve the problems.

  Manufacturers of devices, in this case HP, are responsible for providing drivers for their equipment work. However, the end user is responsible for installing the drivers correctly. In most cases of printer drivers must be installed without the printer is connected to the computer and only connected and turned when prompted by the installation program.

  Also, during installation it is recommended to close all unnecessary programs that are running before installing drivers, and once installation is complete, make a restart.

  I have three printers on my system - two, a Canon Pro9000 and a HP DeskJet 970Cse printer (about 10 years) are directly connected to the main computer and have never had any problems. The third, a Brother color laser is connected through a network and is running smoothly. I do not use all-in-one printers and have a separate HP scanner.

  Depending on the type of team service geek places are concerned, you would be better to go to a computer repair shop and to solve this problem for you.

• "Universal scroll" and "Auto-scroll" function to the wheel button has been removed from the mouse driver?

  I can no longer select 'Universal scroll' or "Auto-scroll" as actions for the wheel button.

  Hello

  I would say contact Microsoft Hardware support support team. They should be able to help you.

  Check out the link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• "The media sharing has been disabled because a windows required setting or a component has changed."

  As well as a few other people here, I got the above message trying to connect for sharing (with my Sony Bravia TV) media. This is the first time I tried to use the media sharing.
  I went through the under process, but at step 4. There is no file [security]. I can't use system restore. It could have been this way for years!
  All solutions?
  Thank you
  1. ClickStart.
  2 Typeregedit in the search box and press ENTER.
  3. Locate the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID]. The text of the name of the folder security ID is long, consisting of alphanumeric characters that are broken upwards with dashes.
  4. right click the [security ID] folder, and then clickPermissions.
  5. confirm that your user account is listed as the owner of this subkey under anti-terrorism tab. If your account name is not listed, click and add it to the list of owners. You must be logged on as administrator or member of the administrator group to complete this step.

  Hello

  Thanks for the quick response.

  Yes, if [security ID] folder is not present, then you can go ahead and create a new one. To do this, follow these steps:

  a. navigate to the location:

  HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME

  b. right-click on HME, point to new and select the key

  c. This will create a new [security ID] folder

  Now, perform the other steps mentioned in my previous post.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Reports errors constantly pop up - even when the error report has been disabled

  An error report windows advising me that "Avira Anti Virus Premium Edition 9.1 has stopped working" continues to appear every few seconds. I don't remember ever install Avira Anti Virus, nor appear on my list of programs when I tried to uninstall it through the control panel. I went in the reports on the problems and Solutions and reporting disabled, but now the window which opens just sounds different.

  I can barely use my computer for this reason. Help, please.

  Hi Tony Spamoni,.

  First of all, try to make an analysis online on your computer to check.

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Then run Avira antivirus removal tool to remove Avira Antivirus from your computer.

  Antivirus removal tool
  http://www.Avira.com/en/support/antivir_removal_tool.html

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• my computer does not prompt its showing error "the command prompt has been disabled by the administrator".

  IAM using window 7 Ultimate

  Maybe

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-command-prompt-has-been-disabled-by/4585aff2-BDBB-4990-B976-5f272b58851c

• Are the boot files always automatically defragmented if normal defrag has been disabled?

  I have normal off scheduled defragmentation and usually via a command prompt defrag every week which is fast and complete. Because the normal Defrag is slow and my laptop would probably not be on when the demand. Also unexpected or regular defrag is not compatible with my daily incremental backups.

  I believe that on Vista startup files are defragmented... auto every three days this still applies if the normal defrag has been disabled?

  I can their defrag via a command prompt... but do I need too?

  I discovered a bit more on this issue and it seems that turning OFF scheduled defrag also turns of automatic defragmentation of the boot files.

  Registry key

  Function HKEY_LOCAL_MACHINE_SOFTWARE\Microsoft\Dfrg\BootOptimise

  is shown as set to N (no)

  I do not bend or change the registry so that this has been done by Vista in response to me turning off defrag... so it seems contrary to what I said earlier, and I need run initialization routine defrag occasionally.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• my command prompt has been disabled by the administrator

  I want to fix this problem.

  Message: "the command prompt has been disabled by your administrator".

  When you try to run CMD.exe or a batch file, you may receive the message "that the command prompt has been disabled by your administrator ". This is caused by the restrictions placed on the registry. DisableCMD value is set to 1 or via Group Policy. To enable the Task Manager, try one of these methods:

  Method 1: Use the console Registry tool

  • Click Start, run and type this command exactly as shown below: (best - copy and paste)

  Tracking Add HKCU\Software\Policies\Microsoft\Windows\System v DisableCMD /t REG_DWORD 0 f d

  Method 2: Modify the registry directly

  • Open the Publisher of the registry (Regedit.exe) and navigate to:

  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]

  • In the right pane, double-click DisableCMD and set its data to 0

  Method 3: Use the Group Policy Editor in Windows XP Professional.

  • Click Start, run, type gpedit.msc and click OK.

  • Navigate to User Configuration-Administrative Templates-System

  • Double-click the prevent access to the command prompt

  You can then disable or set the not configured policy. Disabling or setting this policy unconfigured should solve the problem.

  If you face any problem, let me know.

  K M JAI Support general (INDIA)

• Could not initialize Photoshop because the preferences file has been deleted

  Hello

  After a week without the help of photoshop, I can no longer open it. Whenever I try this message appears: "Failed to initialize Photoshop because the preferences file has been deleted."

  So, I went looking for this preference file that I never deleted and I'm not.

  I tried to reset photoshop with keyboard shortcuts preferences, it does not work. I have also uninstalled and reinstalled the software, it does not work either.

  What could I do?

  Thank you for your help.

  Only, I had to rename my Adobe photoshop CS6 settings file. It works perfectly now!