How to enable Hyper-v in Windows Server 2016 TP4 virtual machine in VMware Fusion?

Similar Questions

• How to enable 3D Graphics and HD audio on a virtual machine?

  How to enable 3D Graphics and HD audio on a virtual machine?

  The 3D support is supposed to allow the possibility for the graphical interface of Windows Aero, in order to test with a Windows 7 if possible.

• Impossible to install windows server 2008 on virtual machine

  Hello

  I installed vmware 9 without any problems, but when I create a virtual machine and I want to install windows server 2008 on it, I see this error:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.
  This host supports Intel VT - x, but Intel VT - x is disabled.
  Intel VT - x can be disabled if it has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting.
  (1) check that the settings BIOS/firmware activate Intel VT - x and disable "trust execution."
  2 turn on the host if either of these BIOS/firmware settings have been changed.
  (3) turn on the host if you have not done since the installation of VMware Workstation.
  (4) update of the BIOS/firmware from the host to the latest version.
  For more information, see http://VMware.com/info?id=152 .

  What can I do?

  my laptop is vpccw27fx of sony and its configuration is

  Processor: inter (R) Core i5 M520 @2 cpu. 40 GHz 2.40 GHz

  RAM: 4G

  OS: Win7 64-bit

  I mention that the host BIOS/firmware is up to date, but I don't know how to check intel vt - x which is disable or enable. !

  Hello

  Restart your laptop and try to get into the BIOS, look for virtualization or VT - x and allow it

• Activate the CBT for Hyper-V virtual machines running in Windows Server 2016

  As Windows Server 2016 has built in CBT (tracking changes block) to take incremental backups of Hyper-V virtual machines. I do not know how to enable this on the virtual machines. Help, please!

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• How to enable "mode Hibernate for windows 10.

  Hello

  How to enable "mode Hibernate for windows 10.

  Thank you very much

  Unit: Satellite Pro R50 - B - 10 G

  Hello

  Mode what do you mean exactly: standby mode standby or Hibernation or hybrid?
  You can enable or disable hibernation using the invoked command: powercfg
  start cmd.exe in admin mode!

  Activate the Hibernate in Windows 10: the command prompt enter: powercfg-h on

  Disable the Hibernate in Windows 10: enter in the command line type: powercfg-h off

• How to set up webmail in windows server 2008

  How to set up webmail in windows server 2008

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to enable password protection in windows xp after disableing it

  How to enable password protection in windows xp after disableing it I disabled it and now I don't have to reverse the trend.

  Hello

  ·        What password are you referring, passwords, or any other application?

  If you're referring to passwords, then follow the steps mentioned below.

  a. Click Start, and click Control Panel.

  b. click on user account and click on your username.

  c. click password to create and then create a new password.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• How to enlarge the screen of Windows Server 2003 on VMware Server 2?

  People,
  
  Hello. Because Windows 7 is not compatible must be installed to PeopleSoft PIA, I need to install VMware Server 2, and then install Windows Server 2003, which is compatible with PIA, on the virtual machine.
  
  But when I open Windows Server 2003 on the virtual machine, Win2K3 screen is very small, and its size is of about 1/4 of the screen of my computer screen. It is not comfortable to work for a long time.
  
  People know how to enlarge the screen of Windows Server 2003 in a virtual machine VMware Server 2 so that its size covers all of my computer screen?
  
  
  Thanks in advance!
  
  
  Lucy

  Did you already installed the VMWare tools in your guest OS in VMWare? In general, it helps a lot to be able to redefine a larger screen definition.

  Nicolas.

• ESXi installation before vCenter Server?  How can I get vCenter Server on a virtual machine on ESXi servers?

  My plan for a new vSphere Essentials Plus 5.5 U2a installation is to have the vCenter Server on a virtual machine on the servers of the host on which is installed ESXi.  However, all the installation instructions I found indicate the user to first install the vCenter Server.  How can I get vCenter Server on a virtual machine on ESXi servers?

  Thank you for your help.

  Hi munkyman welcome to communities.

  After you have installed your first ESXi host, open a browser and go to https://your-ESXi-ip-or-FQDN

  You can download the vSphere Client here. It is a windows application that you can install on your desktop. It is often referred to as the "c# Client vSphere" in communities and blog posts, because it is a new implemented in the vCenter Server Web client.

  But for the beginning, install the vSphere Windows Client. You can then launch it and connect directly to your ESXi host. Here you can create your first virtual machine, which can be the VM vCenter (installation of Windows or device, that is you).

  You can use the web client or connect to the Server with the client c# vSphere vCenter VCenter runs.

  Tim

• How to make for the Hyper-V role to run on a virtual machine in esx 5

  Hello

  I am trying to run the Hyper-V role on a virtual machine in vmware esxi 5. I'm under eindows Server 20008 R2 datacenter edition and install esx I have on a server dell with 32 GB of Ram and 2 intel Xeon processors. the material is active VT. I get the below error message all the time.

  Hyper-V cannot be installed.

  the processor on this computer is not compatible with Hyper-v. to install the role of HRT, the processor must have a version support for hardware-assisted virtualization, and this feature must be enabled in the BIOS.

  Info

  -the material is active VT and I am trying to nest a virtual machine with the hyper-V role.

  any help is appreciated.

  Please see Running the VMs nested.

• Wanted to know the command for GUI-based server in windows Server 2016

  Please let us know the command for GUI-based server in windows Server 2016.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2016 tech essentials 4, customer restore can´t regonize the connected server password

  Hello

  Have installed windows server 2016 tech essentials 4 in Vm ware 11 and wanted to test the GWP of restoration of my host to win customer 10 pro x 64, but can´t get to work would not regonize the created password, nothing else working host dashboard, dashboard.

  As the 2011 WHS, you could restore from another computer with the GWP of restoration of customer to copy in the bin/server folder

  Catering to customer service are running on Windows Server essential 2016.

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  It will be useful.

• Request compatibility s.o. Windows Server 2016

  E' compatibile Windows Server 2016 su Server DELL PowerEdge R210 II

  Buongiorno,

  Gli updates FTP repository not are menzionati quando e if can una nuova pumps.

  Per ricevere supporto per the sommergibili da Dell deve acquistare it Support Ticket, questo form information

  www.Dell.com/.../SS

  Saluti