How to enable system restore
pleace, how to turn the system restore? I am admin. (xp) :)
You are still having a problem with System Restore (SR) or things work well?
Sometimes SR issues are just know how things work. Often, things work as designed, but not the way you want.
I think we can explain or correct any problem of SR... gave you enough information.
Tags: Windows
Similar Questions
-
How to stop System Restore Wizard?
I tried to do a restore of the system on my computer and it wouldn't take. He kept restoring to the date and time that I was currently at the same. When I tried to do the system restore again I got the message running system Wizard, leave now.
Hello
Follow these methods and check if that helps.Method 1:Take a look in the Task Manager to see if the rstrui.exe process runs.
To do this, follow these steps.(a) right click on the taskbar and select Task Manager from the menu.
(b) in the Task Manager, select the processes tab.
(c) at the bottom of the window, click on the process show all users button.
(d) click on continue in the UAC prompt.
(e) in the Image Name column, locate the rstrui.exe process.
(f) if found, right-click the process and select the point to complete the process.
(g) click on end process on the confirmation dialog box.
Method 2:Step 1:I suggest you allows to remove unnecessary files from the hard drive using the clean tool disc.Step 2:I suggest to run the disk check and make sure that your hard disk has no errorsNote: this operation could result in a loss of data on your computer. It is recommended that you back up all important data on the computer before performing this operation.See also:System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions -
How to use "System Restore" using the USB boot-able.
Some updates are being installed and I have turned off, now Vista does not load normally. Instead, Windows loading process is interrupted by error 'blue screen of death '. Now, I have a USB boot-able with Windows Vista Home Premium 32-bit. When I boot with my USB boot-able and select 'Repair your system', it shows the dialog box 'System Restore Options. " There are no BONES in the list, so I click on "Load drivers", an "Open" dialog box appears.
1. in the "Open" dialog box, I don't know which file (s) to locate.
If I cancel and click on 'Next', another windows appears. Then, I select "System Restore". A message pops up saying something like: «to perform an offline system restore, you must specify which Windows installation you want to restore...» For example, enter the command:
Rstrui.exe /OFFLINE:C:WINDOWS.2. I don't know where I have to give this command.
My HP dv6700 s system. When I bought it, Windows Vista Home Premium 32-bit was already installed. But I do not remember the activation code now. And so I can't even contact support and help from microsoft.
Kindly help me.
HP gives you the opportunity to make the Vista startup repair from the diagnostic menu? I thought that this was the case. Have you checked? There is a reason for the message warning about don't turn off your computer while updates are being installed and you may need to restore the State of the plant.
To answer your original question, the drivers that are sought are disk SATA controller drivers. You get them from HP website and set on a (non-bootable) USB to use at the point of "pilots charge."
If you can not solve this problem, you can copy your data to an external hard drive by booting with a Linux Live like Knoppix or Ubuntu distro from a bootable USB. Then restore the computer as long as the plant. HPs factory to start the recovery process by pressing F11 when the computer starts, but there will be a message about what function key to use.
http://www.pendrivelinux.com
http://www.Knoppix.NETMS - MVP - Elephant Boy computers - don't panic!
-
I want to activate my Windows 7 Dell system restore.
What would be a reasonable amount of max storage, I need to allocate to this function?I now have about 180 GB of free disk space on my C drive.In fact, I've never had to use a restore point in one of my PC
The one I am on now was a clean win7 about 3 years ago installation, works 24/7 a 4 discs, C: being 239 GB, the syetem restore on C: is set to 24 GB and currently has 6 restore points (all due to the update of a victory), which are currently utalizing GB 21.5
I guess that 5 GB would only give a single restore point
Once you have reached the maximum size available for restore points, the oldest is removed
-
How to run system restore windows xp
trying find out how to run the system on my desktop dell restore...
trying find out how to run the system on my desktop dell restore...
=============================================
See the following article:(306084) how to restore Windows XP to a previous state
http://support.Microsoft.com/?kbid=306084 -
can't turn on system restore I have tried the help menus but there is no tab click propertys system
turn on system restore
Please describe your problem in detail.
If your question is about how to enable system restore, see the following:
1. click on start
2. click on all programs
3. click on accessories
4. click on system tools
5. click on system restore
6. click on settings of system restore on the left side
7 uncheck "turn off System Restore".
8. click on OK
Hope this helps
Post back if necessary
____________________
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to limit the amount of space drive that system restore uses
original title: how to cut system restore in two points
my hard drive is almost full.and I'm cutting the system restore in half of all aid
Thank you ken
You can remove all restore points by turning off the system. but then I'll make a new restore point for today.
Open Control Panel systems and on the System Restore tab, you can make adjustments to the functionality.
is incidentally, deletion of restore points can be counterproductive because they really do take up that much space, and you might not have as a safety net restore points to restore your system.
really, you should consider adding a second hard drive to your system because programs and Web pages are only more complex and bigger in size. If you will not be able to escape the possible low disk space problem.
either way, microsoft provides 25 GB of free space on this skydrive site, where you can download and store your personal files.
-
system restore points when they and how do I remove them
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Behold, it is I reinstalled Vista and now my portion of my hard drive recovery is almost full and he tells me to delete some of my restore points which could clear enough space to take care of the necessary space. I tried to find files to restore and no luck in that area someone can lend a hand in this area pease.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Don't forget to check with the system manufacturer for instructions, as the recovery of your system and the
Restore points should not have one impact on the other. Did you use OEM manufacturer system
disc to re - install Windows?Phantom memory also holds your restore VSSadmin points it defines parameters.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to turn System Restore on or off in Vista
http://www.Vistax64.com/tutorials/66971-system-restore.htmlAdjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/-Free - CCleaner can also see Restore Points and remove everything except the last.
Tools - System Restore
http://www.Piriform.com/CCleanerCCleaner - Forums
http://Forum.Piriform.com/Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
System Restore is missing in accessories
Original title: tell me how to get the system restore turned on when my system tells me that I have no system restore
Why is that when I spend my Start menu then select all programs then need to Accessories click system restore.there are no click System Restore. How do I get the system on my system restore.
Ensure that his license in system properties. Right-click on the my computer desktop icon, and then select Properties. Go to the System Restore tab, and enable system restore.
-
The message said that "the system protection is turned off. "Turn it on again you can use system restore. The screen that is supposed to appear when I 'click' to enable system restore, does not appear and I get no options of system restore turn it on again. I don't know how he got off in the first place.
Hi Rod,
Let's start with a clean boot.
Note that it is very important to "Hide all Microsoft Services" so that we do not destroy our restore points:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Best regards
Matthew_Ha
-
Original title: where is my last system restore?
I am under W7 SP1 on an Acer Aspire 7720Z computer laptop and when I try to use the system restore get them all is a box saying "no restore points were created on your computer's system disk. To create a restore point open System Protection. "When I open the protection system and then configure the" C"drive, nothing happens! I have not tried to use the restore of the system for at least 2 years, but when I lost Autoplay I thought that I would give it a go and the above is the result. I must say that I solved the problem of AutoPlay (it's a program called VMWare has changed the registry) and after that I put the registry to what it should have been, then, everything is ok. I would really appreciate someone tell me what is the problem... Thank you
"Hi
I hope that you realize that, if in the case of the system restore's restore points is deletedThis is perhaps the reason whyto enable the system restoreYou can follow thisand for all troubleshooting in advancego through -
System Restore does not work, once again.
Hi, I read a topic of 2010 that has not yet been answered. I worked with a tech at Microsoft by e-mail, but when I answered: System Restore didn't work. Now it does not work yet. I had installed Returnil system safe, but I got an error msg 0 x 80004005, (third-party antivirus), so I uninstalled the program. I went through the registry and delete something with Returnil all 4 sections of the registry. Remove the common files folder that was left after uninstalling. Restarted my computer several times. I use MSE, with free versions of spywareblaster and MBAB, who are both at the request not in real time. I tried to restore to a time before I had installed Returnil first, (I installed and uninstalled 3 times in 2 days) and could not. I tried to use a snapshot to restore spywareblaster and managed to restore to the point 2 x before installing because forward the installation of point returnil has been altered. At the moment no malware has been detected and no threat of MSE. What to do next?
Thanks in advance for any help. Liz.
Here's my usual route to find out how to reinstall System Restore:
If you have already run MBAM and SAS, temporarily disabled your antivirus and anti-malware applications and tried your Safe Mode system restore and you still get the restoration of the system to work, you must reinstall just your system restore. You do not have to reinstall XP - just reinstall the system restore part.
System Restore is a frequent target of attacks by malicious software.
When you reinstall the system restore, all your current Restore Points will be deleted and you must restart your computer once the installation is complete. After the reboot, a new Restore Point will be created as a new point of system control in your calendar of SR.
If your system had a malware infection, it could be that some of the files in your old Restore Points are also infected up to wipe out the 'old' and new is often a good idea if you wonder if the old Restore Points are infected or not.
Assuming that your XP is installed on drive C of your computer:
As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD. If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed. More on that later.
Navigate to the following folder:
c:\Windows\Inf
Locate and right-click the following file:
SR.inf
Choose Install
If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.
Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.
Installation can request files from the c:\windows\inf\386 folder. It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.
You don't need absolutely a CD to do the reinstall, because files must already be on your system somewhere if SR was working before.
If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.
If the request to a file and you don't know where he is, let waiting for installation and click Start, search, and search for it
has requested the file and find it on your system. If SR has already worked before, the file is already on your system somewhere.Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK. Installation can request several files along the way, but you can find them all.
Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:
When you are asked:
SR.sys
Point the install in c:\windows\system32\drivers
When you are asked:
c:\windows\system32\srclient.dll
Point install it in c:\windows\system32
When you are asked:
Filelist. XML
Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)
When you are asked:
srframe. MMF
Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)
Once installation is complete, you will receive a message that you must restart your computer.
Restart your computer and look at your schedule of SR. You should have a new point system control in your calendar.
When you get SR working again, I ran MBAM and SAS to make sure that your system is reasonably clean of malware.
The day that you think you need to help the system restore you is not the day to discover the system restore does not work, then you need to test.
After the reinstallation, manually create a Restore Point and test the restoration process and make sure that you are convinced that it works from one end to the other.
-
Failed to create the restore point: XP Sp3; System Restore is on
Found this on a friends PC trying to go back to a previous restore point and didn't find any.
- System/enabled - system restore properties shows it monitors the drive C (the only one)
- Run ChkDsk & reboots
- Searched and found, System Volume Information, hover over the shows as empty
- System Restore reinstalled by right click on c:\Windows\inf\sr.inf and choice of installation
- I tried Safe Mode option but to create a Restore Point is missing
- Tried to reboot f8 last good known configuration, still the same
- Tried to search the Web but without success except one referring to HKEY_LOCAL_MACHINE-System-CurrentControlSet-Services------VxD-VxDMon, but this does not exist in the registry!
- No relevant event in the event log
OK, so I'm out of ideas now! Can someone please shed some light on this?
AVG free is AntiVirus software.Thank you very much
Chris
What works has been uninstall IE8.
Windows search, System Restore and the laminates in IE6 now work correctly. The re installation of IE8 then worked with everything works well in the end.
Thanks for the helpful tips.
-
After you create a system restore point manually, I can't find the point.
Original title : What's next?
After you create a system restore point manually, I can't find the point. Where is he?
Hello
More than you probably ever wanted to know.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to turn System Restore on or off in Vista
http://www.Vistax64.com/tutorials/66971-system-restore.htmlAdjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/You can also view the bridges restore in CCleaner - tools - system restore.
CCleaner - free - on the left side click on download from Piriform
http://www.Piriform.com/ccleaner/downloadI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I tried to disable Norton, but the same results.
This is how to do system restore:
Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.My method will work for you?
Maybe you are looking for
-
Only accessible path to VI at all levels
Hello I'm developing an application of calibration using about six different writing to csv format and read csv live access to the various log files in the same place. I find a lot of your time to update the path for each Vi when I change the locatio
-
Structure of the event: problem with data transfer
Hello everyone, for three days I'm troubleshooting an issue in LabView with the event structures. I really hope someone can help here, because I can't find anything on the entire WEB. I had six groups of equal to a VI entry, each containing five chec
-
Windows Live Mail error code 0 x 80070057 Port 465 Server smtp.gmail.com Protocol: SMTP. Help, please. Usually, he will send the next day after the fighting with him but in work associated with that I have emails on the same day.
-
Is Windows 8 32-bit or 64-bit software?
I'm obviously completely new to this. I am trying to install a printer driver, but do not know how do I know if I have to download the 32-bit version or 64-bit. Thanks for your help.
-
How to word wrap around an image in muse?