How to enable the built-in graphics card support?

Similar Questions

• How to check the compatibility of graphics cards from my computer

  The name of my computer model is

  HP Pavilion Elite HPE

  motherborad: bk170aa-aba hpe-210y

  Processor: AMD Athlon (TM) II X 4 945 processor, 3000 Mhz, 4 logical processor core

  Graphics card: ATI RAdeon HD 5450

  I bought this desktop computer for 5 years and my graphics card had begun to wear off.

  So I did some research on what graphics card can handle my office, but it was very difficult

  Some say that if the PS is high, the computer can use anything but the size of the graphics card care

  and some say that just buy a x 270, but I don't know what my PS is for the computer and I don't know if my computer can use the full potential of the graphics card.

  So, how really to check that my motherboard can handle for graphics cards?

  WandaiWrection,

  You kidding me? The power supply for this unit is 5188-2625, by HPPartsSurfer.

  HP 5188-2625 DPS-300AB HP-D3057F3R power SUPPLY 300W. Size: 5.9 "(W) x3.4" (H) x5.5 "(D) adapt ATX Standard"

  (published on 07-01-14 20:00 to reflect that should have been addressed to WandaiWrection).

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• [p7-1240] How can I find out what graphics cards will work with my motherboard?

  I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggle and scouring the internet for answers, I discovered that it is not compatible with the BIOS on my motherboard, and HP does not update the BIOS. I returned the card and is now seeking a new, but I'm not sure what card works now, since my computer meet the requirements of system for the graphics card and it stil ldid does not work. Because the GPU manufacturers do not list the specifications of the BIOS under system requirements, how can I know if a graphics card will work with my system?

  My computer is a p7-1240 with a 520W PSU upgrade and approximeately 11 "of space to install the card.

  Thexn, welcome to the forum.

  The problem is a lot of video cards latest require the computer to have a complete UEFI BIOS.  HP began using one in mid-October 2012.  Before that date, the BIOS is the legacy.  This is why the video card does not work with your computer.

  I don't know what you would spend on a card, but MSI is a GTX 750ti which is a VBIOS hybrid.  It has a switch to change to inheritance or UEFI.  Is there a video link directly below the image of a card.  Paul of Newegg gives a complete description of the map.

  I like the best EVGA cards.  Their Support gave me a lot of information on their cards.  However, you will need to return to a GT 640 map to find one of their cards that does not require the UEFI BIOS.  They have a few updates for their BIOS' are which solves the problem, but we must call them for accurate maps.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to disable the built-in PDF Viewer and use another Viewer at all times?

  How to disable the built-in PDF Viewer and use Adobe Reader to view the PDF files, without having to set this preference, whenever I open Firefox? The default setting to "Use Adobe Acrobat (in Firefox)". Thank you.

  It's strange. The integrated Viewer - Viewer by default - is described by the expression 'Preview in Firefox' and you will have changed to "Use Adobe Acrobat (in Firefox)".

  Well... you or an add-on or another program on your system must be changed.

  What happens if you disable the Adobe Acrobat plugin (not the extension to create a PDF file, leave it active). Here's how you can try this:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find "Adobe Acrobat" and change the permission 'never enable '.

  Then in the Options page, Applications Panel, change your preference for "Portable Document Format (PDF)" to "Always ask" so you get the dialog box to download instead of the PDF, open in a tab.

  It sticks?

• How to install radeon hd 4550 graphic card in acer aspire m3470g?

  I got it on my hp.  on the hp I just hooked it up and it worked immediately.  I plugged on sucks it and neither she nor the original integrated

  Radeon hd 6530d worked.  Acer has been of no help.  pull it out and the 6530 d was back to normal.  Maybe the hd4550 would not improve performance anyway?  If this isn't the case, I don't want to waste any more time with it.  can anyone answer

  1. graphic performance will improve with the 4550?

  2. If Yes, how should I complete the installation?

  Allan

  Have you plugged the power cable from pci-e card?

  The HD4550 is a low end card, but it can give better performance than the
  AMD integrated graphics card. In part because he has dedicated memory (VRAM).
  The 512 MB model would be more likely to have better performance than the
  256MB model.

  You must install the drivers for the HD4550. Download them the site of ATI/AMD.

  Download page for driver Win7 64 bit

  MFG such as Acer, HP, DELL, etc often use their own drivers, and if they do not have
  provide your machine with this card, they wouldn't be worth making the drivers for it.
  If the ATI/AMD drivers do not help so maybe not that you can do.

  BTW - you also need a power supply with 300-350W to run this card.

  .

• How to restore the built in application of new? Unfortunately I deleted

  How to restore the built in application of new? Unfortunately I deleted

  Hello

  It is on the App Store.

  Delete apps Apple integrated from the home screen on your device iOS with iOS 10 - Apple Support

• How to enable the Support of Legacy desktop Z240

  Hello

  Does anyone know how to activate the legacy on Z240 workstation support?

  Under "secure boot configuration" in the BIOS I chose "Legacy Support enable and disable start-up secure", but after I save and reboot, it reverses to 'disable Legacy Support and allow to secure boot.

  Any suggestions please?

  BIOS version is 1.24, which is the last.

  Thank you very much

  I thought about it later.

  When you disable "Secure starting" or any other option in the BIOS security, you will be asked to enter the 4 digits to restart.

  I was typing the 4 digits while having "num lock" so while I thought I was typing the numbers, the BIOS would not accept the changes simply because what I was typing was 'empty '. Make sure you actually see the numbers, you are required to enter the screen.

  

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to enable the CDI an area of weblogic (not IntegratedWeblogicService)

  I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.

  How to enable the CDI in a weblogic domain base?

  Thank you very much.

  CDI is not an option available on Weblogic server or a configurable parameter.

  It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.

  Try it below to solve the problem

  Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.

  You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.

  Registered the application libraries is also written in the config.xml file, which can also be used to compare.

  It could be useful!

  Thank you

  Vijaya

• How to enable the TOC in cp Bill?

  I am a new user to Captivate.

  How to enable the TOC in cp Bill? Please suggest

  Go to option menu project-> Table of Contents-> select Show TOC.

  Table of contents will be activated.