How to enter BIOS in Windows 8

Similar Questions

• How to enter BIOS on Satellite 5200 mode?

  Hello!

  I am owner of a Satellite 5200 801 and I recently bought a new CD/DVD - rom cause the original just died. The thing is that the drive I bought from the U.S. market and my laptop is European. So I ve double checked all the serial numbers on it and everything was OK except the manufacturing series number which I guess makes no difference to the difference.

  My problem is that when I install the indicator light flashing normal, but when it starts it boot error IDE shoes and windows doesn't see it at all. do you know how I can access BIOS to change cause master/slave, I think there is a difference between them at this point... the original is the master and the second is csel.

  Is there a key to enter the BIOS because I can't enter at all no question combinations. Finally, if I change the playback head DVD/ROM and given that the original would make the change I need?
  THANKS FOR YOUR HELP!

  As much as I know, you cannot change anything in the BIOS but check again. To enter the BIOS settings press the ESC key at startup to the top.

  Good luck!

• How to enter BIOS Satellite Pro A120

  I have Toshiba Satellite Pro A 120

  And I can not open the installer

  How can I open the Bios Setup

  What is the keyboard shortcut

  By using the ESC key at the beginning you can enter the BIOS settings. Please after turning on the laptop press the ESC button and hold down for a few seconds. Just follow the menu on the screen.

• How to enter BIOS on Satellite P200-D setup?

  Hey, stupid question, but I have tried the keys F1, F2, F11 and del, but I can't get into the BIOS.

  Any tips?

  THX

  Hello

  Start your laptop and when Toshiba welcome screen appears, you can see a white bar on the bottom side of the screen and it is written: press F2 for Setup. This means at this point, press F2 repeatedly or just keep it down for a few seconds.

  The BIOS set up will be shown.
  All that s!

• How to enter the BIOS on Satellite U200 settings?

  How can I get into the BIOS menu until windows has started?
  When the laptop starts up, I press F2 so he give chose device which need to read.

  In my other pc I push DEL and the BIOS is here.

  I have the Satellite U200. I have software called and write BIOS version 1.10.04/03/2004

  There must be key to enter the BIOS settings.

  To wear? s manuals I na? find information about entering the BIOS settings.

  [email protected]

  Hello

  To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.

  By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.

  Button led will be used on desktop computers, not on laptops.

  Good bye

• Qosmio X 70-B-102 - how to enter the BIOS

  Greetings.

  Just a simple question. I think so.

  How in the BIOS of my laptop? Boils usually to press the Functionkey right (or combination of both) during the startup. My problem is that when I start my Qosmio, I don't see a message that tells me which key support. Can I be missing something (each time?), but I do not.

  I read the documentation that came with my laptop when I bought it, but couldn't find anything out there on how to enter the BIOS.

  Any info is greatly appreciated.

  Willem.

  Most of the settings can be modified from the Toshiba Control Panel utility, if you really need access the Bios here is the procedure on windows 8:
  http://www.eightforums.com/tutorials...ndows-8-a.html

• Tecra S11 - how to enter the BIOS?

  Hello

  I have a Tecra S11 with windows 7 Enterprise 32-bit installed. I want to make a backup image and install Windows 7 Enterprise 64-bit. However I can't understand how to enter the BIOS to change the DVD player to the first boot device.

  After that 1 second a Toshiba logo, I asked a user password, after that it directly starts in the currently installed Windows 7.
  ESC, del, f1, f2, f10, f11, f12, tried them all, but no BIOS menu is located. What is the trick?

  GR,

  Hello

  According to the user manual you must press the F2 key to enter the BIOS setup, but you must press the front key Toshiba logo appears.
  It work?

  Alternative, you can change the boot order using tool "Toshiba HWsetup' which is preinstalled on your laptop.

• Tecra 8100: How to enter the BIOS

  BIOS settings made using Toshiba Windows utility or how I
  Enter the BIOS during boot? What button I push on?
  Thanks in advance for answers!

  Hello

  Yes, you are on the right track.
  The most common BIOS settings can be changed in the Toshiba HWSetup utility.
  But it seems that the Tecra 8100 uses a Toshiba BIOS, and so you should be able to access the BIOS by pressing ESC and F1.

• Lenovo book Yoga - how to enter the BIOS?

  Hello

  I want to buy Lenovo book of yoga with Windows 10. But before buy you, I need to know if is it possible to enter the BIOS. I was in the shop where yoga book was posted and I tried to restart and enter the BIOS. But when the reboot was keybord inactive (turned off), he was not lucky enough to press any button to open the BIOS...

  Thus, at - it someone to know how to enter the BIOS?

  Thanks in advance

  Pavel

  Good evening

  To enter the Bios of the Yoga book, you need to restart by pressing Power and Volume +.

  Good evening!

• Tecra 8000 isn't boot from CD - how to enter the BIOS?

  Hello

  I have a 2nd hand tecra 8000.

  Now, it does not start from CD? I don't know why... but a question is to know how to enter the BIOS setup, because is not possible with the F2 key.

  How to enter the BIOS?

  Thank you too

  Francisco
  ([email protected])

  Hello

  ESC key to enter the BIOS settings.

• How to enter the BIOS on my L50 A k4W Satellite settings?

  Help me pls! How to enter the BIOS settings? I don't know, and Google doesn't help me not =;)

  As a first step, you will need to perform a complete shutdown.
  Here's a HowTo:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

  Recommencer start laptop, then press F12 to get into the boot menu. You can you find the option for the BIOS settings. You can also try with F2 at start up.

• How to enter the Bios Setup Satellite 4030?

  I am looking for information how to enter the Bios Setup.

  To enter the BIOS settings, use the ESC button.

• How to enter the BIOS on Equium L10 settings?

  Please can someone tell me what I press the button too enter the setup of the bios at the beginning when I turn on my pc cos I tried everything, but nothing works.

  Hello

  Whenever when you switch the laptop you see on the low left hand site short instruction how to enter the BIOS settings. In your case you must use the F2 key. Please, keep it down immediately after switching on the laptop.

  Generally, Toshiba laptops come with two different versions of BIOS (producer of BIOS):

  -TOSHIBA BIOS: enter using the button ESC and F1
  -Phoenix BIOS: enter using the F2 key.

  According to the specs of your device has Phoenix BIOS.

  Good bye

• Satellite A40-151: how to enter the BIOS settings?

  Hello...

  I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
  The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

  Help, please

  thanx

  Hello

  I think you have a Toshiba BIOS.
  In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

  By the way; You can also use the F12 key to get the boot menu.
  Then you could easily choose your boot device
  This also works

  Good bye

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.