How to enter different values without logging in every time in OATS

Similar Questions

• How to print on the remote computer without logging in every time?

  I have a (USB) printer connected to my desktop pc. My laptop connects to the network and can see the desktop pc. Both are under Vista. The Office to share everything on a private network and the requirement of password is disabled. When I try to print from the laptop, it fails. If I have first of all on the desktop icon in the network and enter my user and password, then print... it works very well. Restart the laptop everytime I have to redo this process, which is a bit annoying. Is there a setting somewhere that will allow me to stay connected or auto log on the desktop when I set up the network connection to start. Everything works network wise between the two computers as long as I'm logged in first.

  Hi hiitsme,.

  Step 1: First tryto turn off protection of password sharing on both computers, and then see if it works well or not.

  Password protected: OFF (if you have it on, and no names of user and password identical don't set up, you will be asked a user name and password when you try to access a Vista computer from another Vista computer)

  You can check the following links for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  You can also check if the properties of the printer on the desktop has an option to stay connected during your connection.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• att/yahoo failed to create the homepage without logging in every time?

  everytime I open firefox I am required to log my att/yahoo account. How can I save my log on info as my home page in order to avoid this tedious process. I try to save the homepage of myyahoo as my home page but whenever I close firefox and re - open on that it requires that the newspaper.

  It seems that you use Firefox in private browsing mode (don't remember history) and in this case all the cookies are session cookies that expire automatically.

  Websites to remember you and automatically log you in are stored in a cookie.

  • Create a cookie exception permit to keep such cookies, especially for sites Web secure and if the cookies expire when Firefox is closed.
  • Tools > Options > privacy > Cookies: Exceptions

  Make sure that you run not Firefox in private browsing mode (permanent) (don't forget the story never).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

• After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting.

  connection problems on hotmail through msn

  After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting

  Hello richardcatchpole,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How to get out with renaming a file every time that I change it?

  How to get out with renaming a file every time that I change it?

  Since the last update, I have more the possibility to combine files. How can I recover this feature

  10 pro version

  For the first issue: disable the preview pane in Windows Explorer.

  Wednesday, July 15, 2015 to 18:46, keithf52379832 [email protected]>

• How to swap two values without using the third variable using the procedure

  How to exchange the two values without using the third variable using the procedure?
  
  In a procedure using two mode we pass two values A = x and B = y, and let us pass parameters to receive the output has A = y and B = x without using the third variable
  
  Published by: Millar on August 19, 2012 11:23

  Your question doesn't seem wise. As written, there is no reason to a third variable, just

  CREATE OR REPLACE PROCEDURE(
    x IN number,
    y IN number,
    a OUT number,
    b OUT number
  )
  AS
  BEGIN
    a := y;
    b := x;
  END;
  

  If it's an interview question, I suspect that the intention was that you had two settings IN OUT and you wanted to swap the values without the help of a third variable.

  Justin

• How to stop windows mail spelling my signature every time that I have send a message.

  Hello

  I have a custom email signature I settled by default on my message options. Whenever I compose a message, the spelling check includes my signature. I need to spell check my actual post without going through the spelling of signature every time.

  Also, I can't insert any default signature message. There must be a limit to the number of characters, you are able to use. Is there a way around this problem as my message signature cut three quarters of the way through.

  Thank you very much

  Drew.

  Hello

  This is an option, make the HTML Signature.

  How to add an Image to your Windows Live Mail or Outlook Express Signature (and Windows Mail)
  http://email.about.com/od/livemaildesktoptips/Qt/Add_an_Image_to_Your_Windows_Live_Mail_or_OE_Signature.htm

  How to create a Signature in Windows Live Mail, Windows Mail or Outlook Express
  http://email.about.com/od/livemaildesktoptips/Qt/How_to_Create_a_Signature_in_Windows_Live_Mail_Outlook_Expre.htm

  How to create and configure a Signature in Windows Mail (limit of 4K and use Notepad)
  http://www.Vistax64.com/tutorials/94853-Windows-mail-signatures.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to disable the Plugin Check to open every time browser opens

  Whenever I open firefox, "plugin check" opens. Even after I installed and updated all the plugins, the plugin check appears whenever firefox opens. After update all plugins that I restarted my pc, reset the browser and checked for if ensure that my homepage has not changed change plugin firefox, deactivated all my plugins and even tried to block the website by GUESTS.

  I am quite able to check to see if my browser and plugins are up to date and I don't appreciate the unnecessary loss of time with this plugin-control running in every time the browser opens. Similar to the updates, this should be an OPTION check not FORCED and that there should be a way to disable it without the browser opens a blank tab extra or forcing the user to change the subject: config to work around.

  Website: https://www.mozilla.com/en-US/plugincheck/

  Hello, please update firefox to the latest version - it's a problem that normally appears only on older versions...

• Change the size of the object by entering different values in the transform Panel

  In CS5, I want to make a shape half his size. I tried to enter 1162.5 px 1.5 and it seems that its size. What is this story. HAVE to do? Maybe it is just the end and I don't think correctly and I'm embarrassing myself, but when I enter 1162.5 px.5 she grows. Shouldn't that say HAVE to do half her size?

  Thank you.

  How to use "Ctrl/CmdEnter" to maintain proportions (same relative change in W and H). ?

  There is no need to do this in the new versions of Illustrator. (Jacob uses version 10. You are using version 15.) If you want to limit the proportion, just make sure that the link between the H and l fields is active.

• Tecra 9100: How to enter the BIOS without password BIOS?

  Hello

  I have a password on the bios of my tecra 9100, but do not remember what it is, anyone know a way around this to get into the bios?

  Hello

  Unfortunately I have some bad news for your.
  CA? s not possible to get into the BIOS without defining the old password.
  In this case, if you na? t know the password, so you should contact Toshiba service in your country. Only the ASP can remove the existing password.

• How to give different values to different indicators

  Hello

  Please check the attached vi below. IAM reading some numerical values (SS1.vi) and display it in the indicator. ? (In RR1.vi). During the execution of two screws, we can see that the two instruments (pressure gauge and thermometer) showing the same reading. My intension is to display variable values. Inorder to do that can anyone please suggest what changes are made in SS1.vi.I tried a few ways using the generator of NombrAl and all but not worked... Help, please.

  Hi GerdW,

  I solved the problem and the VI is attached. My next intension is to get values of a sensor (supplied) and display in these devices, as shown in RR1.vi.

  In any case thanks for the reply

• How to send different value of variable presentation in URL GO?

  Hello
  I use GO URL to send presentation Variable (d_pv) to filter the other report on column 'day '...
  
  "(a href = http://server/analytics/saw.dll?GO & path=/shared/BI%20Reports/Ki1/KPIs%20Detail%20Priority%203%20Shipped & Action = Navigate & p0 = 1 & p2 & p1 = eq ="Time". Day & p3=@{d_pv}) SHIPPED (/a)'
  
  
  It works very well. But my goal is to filter the report by using the eve of the value of d_pv (for example. If the value of d_pv is ' 2010-04-27', I need to filter the others using report "(2010-04-26')"
  
  I couldn't find to spend one day back value of presentation using variables go url.
  
  Help, please...
  
  Published by: bob123 on April 28, 2010 10:15

  I would say use TIMESTAMPADD(SQL_TSI_DAY,...,1) and use spend your variable in this column.

  When you spend the day report 28/04/2010 + 1 column target, it will display the 27/04/2010 data.

• How to pass a value cannot be used in time during the Navigation target

  Hi all
  On a dashboard, I have a poster measure info bar chart by name each month (month name being on the x axis). The months displayed are based on a dashboard command prompt (year, month name) year-to-date.
  When I click on the bar of a month on the chart name, I use the Navigation target to open another query in the dashboard. The target a YEAR and MONTH "is requested. For example, if I click on 'MAY' bar, the other application opens to display data «CAN» Everything works.
  
  However, I need to do this not for the month selected as described above, but for the year to date instead. For example, I click on 'MAY' bar, I want the other application to display the data of 'JAN' thru 'MAY', not just 'CAN' itself. I'll do the same thing I have done to the request of the source, have a filter for the month number (not the name of the month) and have a 'BETWEEN 01 and xx' where ' xx will be calculated by taking the name of the month and using the number of months instead, so it would eventually "BETWEEN 01 and 05.
  
  Question: Is there a way I can pass the name of the month which was clicked on the chart and move on to the target, so I can use in a calculation and not the filter "is invited"?
  
  Thank you!

  _Analytics,

  I had the same solution but slightly different. It's different because you assumed this month as the number of months, but according to the scenario described by the user, is a name of months where the navigation must be done.

  user13033100,

  Here is the solution with an sine qua non - year should be fixed by default.
  Outside of having a main report and the subreport, create an additional report by month #, name of the month, call the "report additional sup.
  Now in the ' additional report under ' create filter of month name as "" is bringing"---> bar value from the master report is passed to this 'report additional sup '.
  Thus, month # column "additional sub of the report" gives you value months appropriate to limit the subreport.
  Month # of the report additional sup', create a filter on the column for the month in the subreport. The month filter sub report must be an advanced filter 'filter based on the results of another application', search for ' report additional sup ' month # column. In here a consumption below or equal operator.

  Quickly close the thread if replied/useful.

  -bifacts
  http://www.obinotes.com

  Published by: bifacts on October 21, 2010 14:12

• How to get the value average of no particular time

  Hi all

  I have a column with thousands of values. About 32000.

  I want to find the average value with the time of 160 step. Which means, first of all, I want to find the average value of 160 first item and then on up to 32000.

  for example (1,160), (2,161), (3,162)... (_, 32000)

  And all the average value I have to choose the maximam one value.

  Please give me an idea

  Reagards,

  Maulik

  Hi Sir,

  I thank very you much for your solution and advice.

  Yours sincerely,

  Maulik

• How can I configure iMac for multiple users (my wife) does not have to log in every time!

  Whenever she will use this new iMac, there is another screen (she says). OK, so I read in OS X EL Capitan "the missing manual" where we don't have to use a password every time. Tried that... seemed to not work, and Yes, I unblock this safety program to make the change.

  Go back, is there a way to set up where when starting, the main screen shows and not the last used screen?

  Thanks to all who can help this old computer old unwhiz.

  Go the Prefs system/users and groups, release at the bottom left then open the Options of connection and use the top menu drop down for an automatic connection.

  As far as beginning with the last used screen you close all applications before you stop? Make sure that you reopen windows at startup to the top