How to exclude the field of persistent object

Similar Questions

• How to reorganize the field that was dynamically created by the controller

  Hello
  
  We have created a field (of 'Style' = > 'MessageChoice') in the page using the declaratively controller and also where we dynamically attach a View object to the field based on certain conditions.
  
  The hard part, that we are facing here is that we couldn't a replenishment of the field through customization because the field is created via controller because we don't see not any which column.
  
  Can someone help me please how to reorganize the field by the controller or any other way to do this?
  
  
  Your suggestions are very appreciated.
  
  
  With our thanks,
  Trehout

  Depreciated, the method will not be supported or will be obsolete in the future provided.
  don't worry about the depreciation methods. His will not touch you in the near future...
  Because the whole ofa technology is amortized now... ;)

  Yes, if the item is part of a specific region use as a handle.

  Prasanna-

• How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive

  How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.

  In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))

  Hello

  I suggest you to follow the steps in the article below and check if it helps.

  Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281

  Hope this information is useful.

• How to validate the field "Reason for change" in the commercial indications using JavaScript?

  How to validate the field "reason for change" in the commercial directions Summary tab using JavaScript?

  Current version of PLM4P: v6.1.1.5.2

  Please help me to validate the fields using JavaScript.

  Thank you

  Nefertari

  Developed using some of the Javascript predefined functions that we offer, it's just JavaScript and jQuery.

  But here is an example.

  (Use Internet Explorer F12 developer tools to find the IDS of the fields to work with.)

  $(document).ready(function() { 
  
      if (UI_Ext_isSpecInEditMode && UI_Ext_HasWorkflowBehavior('1005'))
      {
         //normally, we can use jquery to retrieve elements ($('#ifOfInput).val()), but it seems to fail when the id and the name attributes are the same. so we just use javascript document.getElementById instead.
         var reasonForChange = document.getElementById('ctl01$SpecSummaryctl1$ctlCollapsibleContentContainer$ctl00$txtChangeReason')
  
         if (reasonForChange != null) { 
  
              if (reasonForChange.value == null || reasonForChange.value.length == 0) {
                   UI_Ext_MarkFieldAsRequired('ctl01_SpecSummaryctl1_ctlCollapsibleContentContainer_ctl00_lblSpecSummaryReasonforChange');
                   alert('Reason For Change is required');
              }
         }
      }
  }); 
  

  However, not the user registration or workflow specification. If you were to do this, you must remove record them and workflow buttons and links, and this probably isn't the best practice. On the contrary, you would write validation server that would give you this error message if they try to save/workflow. (So most customers do not use Extensions of the user interface for this type of validation).

  Kind regards

  Ron

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• How to add fills or margin in the field of text objects?

  Hello

  When I added a BitmapField to a Manager I can user setSpace() on theBitmapField to add a space/margin between the edge of the screen and my BitmapField, how can I do the same for RichTextFields?

  Hello

  There are some function in the field class, you can use more there is a class more XYRect that can be used to set the margin margin.

• How to upgrade the fields in word

  Hello world

  Is it possible to update all fields, as explained here (update a reference from one page to the other)

  https://support.Office.com/en-us/article/Create-or-update-a-cross-reference-aa35c606-34e8-4c64-B6EB-...

  to update cross-references linked to bookmarks in a word model primarily by adding some text and photos?

  I struggle to find a solution.

  See you soon,.

  It's just a start.  I do not have the loops For your macro, but you can see how to access the necessary ActiveX objects.

  

• How to recover the active user interface objects on a screen?

  Hello

  Is it possible to recover all of the active user interface objects on a screen?

  I found ago api like net.rim.device.api.ui.Screen.getFieldWithFocus, but how to get sound type of subclass as ButtonField or BitmapField?

  another take:

  If you retrieve the field with focus, you can check what type of field you have recovered (using instanceof, for example)

• [ORA-22905] How to read a field of an object inside another object?

  Greetings,
  
  I'm a student and in an exercise working with Oracle object-oriented programming features.
  
  In the database, we have defined an object type, which is then considered as within another type of object. The thing is, that I can not read an attribute of the internal object. I've read dozens of Web sites, but none of them helped until now. I also read the PL/SQL user's Guide and the reference document.
  
  The internal object is defined as follows:
  

  create type address_t as object (
          street varchar(50),
          city varchar(50),
          pcode number(5,0)
          );

  The external object has an object of type address_t inside:
  

  CREATE TYPE professor_t as OBJECT(
            code number(2),
            p_name varchar(50),
            address address_t,
            );

  There is also a table named PROFESSORS that stores objects of type professor_t
  
  First of all, with a simple SQL test I can see the data inside the Professor of the object, even the address_t of the object:
  

  SELECT * FROM PROFESSORS WHERE CODE = 13;

  Returns the following:
  

  CODE    |         NAME      |       ADDRESS
  ---------------------------------------------------------------------------------
  13      |         JOHN     |       MYSCHEMA.ADDRESS_T('FIFTH AVENUE','NEW YORK',12345)

  The thing is, I want to read the field Street of the object address (of type address_t) inside Professor (of type professor_t).
  
  I saw everywhere where the way forward is to use dot notation, and I've seen examples of the VALUE control, but none of the following SQL statements work:
  
  

  SELECT VALUE(ADDRESS.STREET) FROM(
    SELECT CODE,P_NAME,ADDRESS FROM PROFESSORS WHERE CODE = 13);
    
  SELECT ADDRESS.STREET FROM PROFESSORS WHERE CODE = 13;
  
  SELECT PROFESSOR.ADDRESS.STREET FROM PROFESSORS WHERE CODE = 13;

  I would appreciate if someone could show me how to access the values of the field of the object inside an object.
  
  Thanks in advance,
  -David
  
  Published by: 858176 on May 11, 2011 18:53 formatting

  Try this:

  select value(t).address.city from profesores t;
  

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/objects.htm#i12884

  HTH
  Thomas

• How to disable the field in the drop-down list to enter a value

  I got a box dropdownlist field and previously a few numerical values on her list:

  say a list of page numbers,

  11

  22

  33

  41

  42

  43

  52

  ..

  I put codes on the change event so that once the user clicks on an element, it is directed to the specific page immediately.

  But the case is that some users would like to enter the field and type a number rather than clicking.

  If he tries to type 42, change event will get him on page 41 instead (as the 1 '4' tank is put in correspondence),

  and then accidentally edit a field then put the tank rest '2' on it.

  so, how can I disable tapping on a drop down field?

  Rgds.

  Hello

  If you select the drop-down list and go to object > field palette. Here you can uncheck "allow customized entry. This will prevent the user to type in the drop-down list.

  With the drop-down menus, I prefer script to the exit event.

  Good luck

  Niall

  Ensure the dynamics

• How to exclude the songs, didn't like in a smart playlist

  How exclude the songs didn't like in a smart playlist.

  Note the songs that you don't like as 1 Star then add side is not 1 star smart selection criteria.

• How to access the attributes of an object using TestStand. ?

  Hello

  I have a class named status in c# that has 2 data members. There is another class named parameter and it has functions that return objects of type status.

  I did the DLL from the parameter class. Then I added this class to NI TestStand and calls a function and this function returns an object of type status.

  Is there a way by which I can access the data members of the object returned in TestStand?

  Thanks in advance

  Yes, there is another alternative. If you state a value type (i.e. a struct in c#) then you can tell teststand to store it in a corresponding data structure TestStand rather than an object reference variable. It works even for the private fields in your structure. To do this:

  (1) first to report a type value and no matter what other changes are needed in your code to take account of this (value types are copied when it is passed by value to another method, if this isn't what you want you will have to pass by reference - i.e. the c# ref keyword).

  (2) recompile your assembly.

  (3) in the specification of module Panel TestStand .NET, you should now see a new button next to the expression for the return value of type status resembling TestStand data type icon. Press this button and it will prompt you to create a TestStand custom data type that matches the type .NET. Select this option to save the type in the type palette file MyTypes.ini. Just do it once. Once the type is in your palette file type MyTypes.ini it will be available then and you must only update if you change the type .NET.

  (4) create a local variable of the TestStand Custom data type instead of the object reference. Note that you can expand and see the properties under.

  (5) use this new local variable to store the return value of status. TestStand will be copy/update the properties of the variable to match those of the .NET structure that the method returns.

  NOTE: You can also simply store the fields of a struct in separate variables increase the return value of type status once it is a struct and specify a separate variable for each field instead of creating a custom data type TestStand.

  Don't forget that TestStand makes a copy when you store a struct that this way replaces the struct when this will not appear in the copy.

  Hope this helps,

  -Doug

• After using popScreen() than pushScreen(), how to remove the fields present in this first screen.

  I have two screens, first_one contains 17 fields & by a button_presnt in the first screen, I'm reaching to the second screen, on the second screen after pop_screen (first) & push_screen (first) I get my first screen, now I want to remove 15 fields, but I face the error, this illegal argument exception, or "Try to delete a field that is not the Manager"... & Note this point I got the get_field_count from the first screen.
  Try

  {

  UiApplication.getUiApplication () .popScreen (object_to_supprot);
  UiApplication.getUiApplication () .pushScreen (object_to_supprot);
  }
  catch (Exception err)
  {
  Dialog.Inform ("page load error:" + err);
  }

  Try
  {
  Dialog.Inform ("field homepage County:"+ object_to_supprot.getFieldCount () ');

  int k = object_to_supprot.getFieldCount () - 1;

  While (k > 1)
  {
  Delete (object_to_supprot.getField (k));
  k-- ;
  }
  }
  catch (Exception err)

  {

  Dialog.Inform ("error in the setting of the key work:" + err);

  }

  I disagree with Simon here.  I think that the deletion of fields of a screen is a valid thing to do.  I can see the case when you are using the same screen, but have two different sets of data that require slightly different fields on the screen.  This is what seems to be the case here.

  I just realized what is the problem.

  your code:

  Delete (object_to_supprot.getField (k));

  must be:

  object_to_supprot. Delete (object_to_supprot.getField (k));

  Your current code is actually:

  This.Delete (object_to_supprot.getField (k));

  and 'this' is probably your second screen.  You want to remove fields from your first screen.

  Can I ask you to review my first post and Simon post, once again.  If please review how to use the battery in the display and make sure that you use it properly.

• How to fix the field updates

  Hi I was updating my windows 8 pro and all the windows update from the internet has been disconnected and many updates has been the field now is more able to install updates failed, how can I install them (I mean when I check for updates updates failed does not appear)

  Hi Sulayman,

  I would like to inform that updates will show only the list of new updates that must be installed. View update history in Control Panel displays the updates failed and updates installed successfully.

  Follow the steps below to view the history of the update and install the updates manually.

  (a) press the Windows key + X, select Control Panel.

  (b) upgrading from Windows, select

  (c) click view update history, check the updates failed.

  (d) note the number of the update

  (e) install in manually from the Download Center.

  http://www.Microsoft.com/en-in/download/default.aspx

  If you have additional questions, feel free to post. We will be happy to help you.

• Report - form how to align the fields above the other

  Hello

  I have the report formatting I want to have a field with guest left this one per line. I wish all the fields under one of the other goes down of left page.

  I tried all variants with layout-> alignment, but can not get the desired result. Description in the manual seems simple, but don't know what I'm doing wrong.

  I wish only one record per page. Super simple desired attached output.

  Thank you

  Yes, in the layout of the document. assistants can make the initial layout or you can do it manually, but even if you use the assistants you are always free to change the layout.

  When moving things from the presentation, you want to be careful about the flex and limit parameters. they are controlled by the buttons at the top where the ToolTips are "confine on ' or 'Confine offshore' and ' Flex on ' and «off Flex»

  If flex is on, many things may move when you move an object. Turn it off to see the difference (it is enabled by default).

  Borders is also important. You do not want to move items out of the box where it belongs unless you know what you're doing. By default, borders on.

  Good bye.