Report - form how to align the fields above the other
Hello
I have the report formatting I want to have a field with guest left this one per line. I wish all the fields under one of the other goes down of left page.
I tried all variants with layout-> alignment, but can not get the desired result. Description in the manual seems simple, but don't know what I'm doing wrong.
I wish only one record per page. Super simple desired attached output.
Thank you
Yes, in the layout of the document. assistants can make the initial layout or you can do it manually, but even if you use the assistants you are always free to change the layout.
When moving things from the presentation, you want to be careful about the flex and limit parameters. they are controlled by the buttons at the top where the ToolTips are "confine on ' or 'Confine offshore' and ' Flex on ' and «off Flex»
If flex is on, many things may move when you move an object. Turn it off to see the difference (it is enabled by default).
Borders is also important. You do not want to move items out of the box where it belongs unless you know what you're doing. By default, borders on.
Good bye.
Tags: Oracle Development
Similar Questions
-
APEX form - how to align the text boxes
Hello
I'm creating a form and I have a few text fields bordered square... Unfortunately, it is not aligning... This is how it manifests itself.
Here is the configuration
Thank you
Developing using the button display the grid on the developer toolbar. In this way, you can see the grid changes and check the settings of the grid if necessary.
As pleNn have already said, the question mark is automatically added if you have a help text for an element. It's probably nothing more than "enter the value for the number of trips. You can delete the help text if it is not useful.
-
How to align the Hcenter fields in VFM?
How to align the Hcenter fields in VFM? its giving problem
solution on mine! years of posting for reference...
what I did earlier.
I wanted to have a manager of fixed size (maximum size) and put fields here, during an aliging then using stylebit it did not work. I used sublayout and fixed to what extent a perticular dimension
resovled doing problem.
It is not sufficient (or necessary) to if you want to use sublayout to have a fixed size, if you use the alignment, bcz setting hardcodedly properties, the other model overridden, so u must override the methods 'getPrefferedWidth & height', not the two held all the time, but according to the needs, if you want to:-alignment, you can try only method "width" and comparable to V-alignment. I included these methods and found that half of my UI related issues would have resolved more easily, if I tried this previously.
Thank you best regards &.
-
How to align the text to the right in the text filed using Adobe Acrobat Pro?
How to align the text to the right in the text filed using Adobe Acrobat Pro? I am able to align the text box, but not the alignment of the text with the deposited text.
In the Options tab of the field properties dialog box, you can choose left, Center, or right alignment.
-
How to align the position of a node in a pane of the grid using CSS?
Hello
I have an interface defined in FXML:
I want to align the labels to right using CSS:<?xml version="1.0" encoding="UTF-8"?> <?import java.lang.*?> <?import javafx.scene.*?> <?import javafx.scene.control.*?> <?import javafx.scene.layout.*?> <BorderPane xmlns:fx="http://javafx.com/fxml" > <center> <GridPane alignment="top_center" hgap="8" prefWidth="450" vgap="8" style="-fx-padding: 10;" > <styleClass> <String fx:value="form"/> </styleClass> <children> <Label text="From" GridPane.columnIndex="0" GridPane.rowIndex="0" /> <TextField fx:id="from" GridPane.columnIndex="1" GridPane.rowIndex="0"/> <Label text="Recipient(s)" GridPane.columnIndex="0" GridPane.rowIndex="1" /> <TextField fx:id="recipients" GridPane.columnIndex="1" GridPane.rowIndex="1"/> <Label text="Subject (defaults to title)" GridPane.columnIndex="0" GridPane.rowIndex="2" /> <TextField fx:id="subject" GridPane.columnIndex="1" GridPane.rowIndex="2"/> <Label text="Send mail as ..." GridPane.columnIndex="0" GridPane.rowIndex="3" /> <ListView fx:id="mail_format" prefHeight="100" GridPane.columnIndex="1" GridPane.rowIndex="3" /> <Label text="Plain Text Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="4" /> <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="5" /> <TextField fx:id="plain_template" GridPane.columnIndex="1" GridPane.rowIndex="5"/> <Label text="Send as is (do not dump into plain text)" GridPane.columnIndex="0" GridPane.rowIndex="6" /> <CheckBox fx:id="plain_noconvert" GridPane.columnIndex="1" GridPane.rowIndex="6"/> <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="7" /> <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="8" /> <TextField fx:id="html_template" GridPane.columnIndex="1" GridPane.rowIndex="8"/> <Label text="Other configuration" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="9" /> <Label text="Reply-To" GridPane.columnIndex="0" GridPane.rowIndex="10" /> <TextField fx:id="reply_tos" GridPane.columnIndex="1" GridPane.rowIndex="10"/> <Label text="Cc" GridPane.columnIndex="0" GridPane.rowIndex="11" /> <TextField fx:id="ccs" GridPane.columnIndex="1" GridPane.rowIndex="11"/> <Label text="Bcc" GridPane.columnIndex="0" GridPane.rowIndex="12" /> <TextField fx:id="bccs" GridPane.columnIndex="1" GridPane.rowIndex="12"/> <Label text="HTML base (defaults to current server)" GridPane.columnIndex="0" GridPane.rowIndex="13" /> <TextField fx:id="html_base" GridPane.columnIndex="1" GridPane.rowIndex="13"/> </children> </GridPane> </center> </BorderPane>
However I have not found any way to align the labels in the GridPane using CSS, or - fx-alignment: right, - fx-node-hpos: right. -fx-hpos: right. -fx-text-alignment: seem to work well....form *.label { -fx-alignment: right; -fx-font-weight: bold; -fx-hpos: right; -fx-text-alignment: right; -fx-text-wrap: true; }
The only way to make it work is to define the attribute of each label Grid.halignment:
But what happens if I want to change that at a later stage-> I need to change this attribute for each node.<Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="right" GridPane.rowIndex="7" />
How can align the labels to right using CSS only?Currently CSS in JFX cannot really be used for layout page (or calibration). This is one of those grey areas between what is style (which should be in the CSS) and what is layout (which should be in the FXML). I think I remember Richard mentioning once in a forum or an article that he did not want to add alignment stuff to the CSS at a certain point, but don't quote me on that. You might have a search through Kenai to see if there is a feature request for it and if not add one.
Perhaps you could it with fake labels stretch to fill the available space in the GridPane. For this, you need to disable the restriction of maximum size (setMaxWidth and setMaxHeight to Integer.MAX_VALUE) and ensure your forced GridPane are such that the label will fill the cell. Once you have a stretched label alignment will come into play as the text is aligned relative to the area of the label (as opposed to a manager that aligns the entire label compared to its parent). I think that put a border on the label when debugging to work on what's going on.
Another less confined but more flexible alternative might be to use variables in your FXML files. You can do this in a number of ways. We must create a bean that has all the variables of your on it with accessors get and then you can move it to your charger FXML namespace and then reference it by using things like ${myConstants.gridAlignment}. Another is to create static methods on a class that a node, these can then be called from the FXML using a notation similar to GridPane.alignment. This second approach only works for things where you want to work directly on the node, but for your scenario which should be ok I think. And then there is always the option to activate a script language in your FXML, allowing you to perform more nothing.
Hope that helps,
zonski -
How to align the c4100 series ink cartridge
I have problems hologram out, so far I did 8 pages of alignment, and they look the same all OK for me, now I'm trying to align the cartridges. My laptop uses windows 8.1. How to align the cartridges.
Thanks in advance.
Hi @lyjonne
You can install the full software features and use the Printer Wizard to align the cartridges, or you can use the printing and scanning doctor.
Use this link to download and run the HP printer install wizard for Windows
The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.
Or click here to download and run the printing and scanning doctor > www.hp.com/go/tools
As you can see the Print and Scan Doctor allows you to print a page, to perform the alignment, to clean the print heads, get print diagnostic information and more.
I hope this helps.
-In support of Movember
-
How to align the edges of the images
I have an image that resembles a parallelogram because when the inage has been taken there does not match the grid. How to align the edges?
Appreciate the help.
Different ways to do it... but without seeing an image of what you are doing then I would suggest that.
First SNAP TO GRID.
View > Snap To > grid
Then
Edit > Transform > distort
This will allow you to move the corners and stretch the image.
But if you share a screenshot or image we can help you in more detail.
-
How to align the dialog box in the center of a popup programmatically
Hey,.
I use jdeveloper 11g release 2.
Can someone help on how to align the dialog box programmatically a popup?
Kind regards
Steve
Hello
As far as I know, if we do not have indications of the dialog then displays on the center of the screen by default.
This will solve your problem?
Gud luck!
HA
-
I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?
I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespaceD: 74.2 GB with 70.6 freespaceThese are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WISo I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40I hope that makes sense to someone, any help gratefully received!As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.
J W Stuart: http://www.pagestart.com
-
How to align the text with fields of the table values
Hi friends
My Baisc requirement is to display some values of address with some raising in boxes at the same level as the half left of the page displays address and other half right side of the page displays the values in the boxes, but when I created a table to display the value in boxes, he does not insert text of the Ant at the same level on half of the page as my requirement is
My requirement is
AddressAddressAddressAddress val in a val in a box2 box1 / / I m not able to display any square here box
AddressAddressAddressAddress val in a box3 val in a box of 4
AddressAddressAddressAddress val in a val in a box6 box5
AddressAddressAddressAddress val in a val in a box8 box7
but it comes as
Val in a val in a box2 box1 / / I m not able to display any square here box
Val in a box3 val in a box of 4
Val in a val in a box6 box5
Val in a val in a box8 box7
AddressAddressAddressAddress
AddressAddressAddressAddress
AddressAddressAddressAddress
AddressAddressAddressAddress
and that's my problem I do not know how to align bot at the same level, any advice would be very help full
Thanks in advance
Thank you
PratapYou can send me your sample xml and RTF, it would be better that I can see the RTf.
-
APEX 5.0 Interactive report (nopadding, how to set the line height)?
APEX 5.0.
Theme: 26. Productivity applications
Interactive report region
Where and how can I global set Dimensions height of the line and policies, etc., lines in interactive report?
I use standard interactive report.Thank you
user555867 wrote:
Please help me in detail.
The best way to get detailed help is to create an example on apex.oracle.com and share credentials of developer comments in the workspace here.
I have:
1 created a (= external CSS style sheet) file with the name 'ir_css_padding.css' local on PC (C:\tmp).
2 added "Shared components"-> 'Static Application files'-> 'Download the file statistics Appl.': 'c:\tmp\ir_css_padding.css '.
3. under "attributes of User Interface:
(General properties)
The value 'Statistics file prefix': ' #APP_IMAGES #ir_css_padding.css.
'Media Type' value: text/css
Why have you changed these settings? They are not relevant to the addition of static CSS files in the repository database. Read the help on line for these properties:
Static file prefix
Determines the virtual path of the Web server uses to point to static files when you use the #APP_IMAGES substitution string #.
Do not specify what to do refers to files that are stored with your application definition in the database.
For performance reasons, you can also store your application files on your Web server. Use a valid URL to refer to them.
Media type
Enter the Internet media type. An Internet media type is identifier into two parts for the formats of files on the Internet. A media type is composed of at least two parts: a type and a subtype and one or more optional parameters. This type of media used in the HTTP Content-Type header when the page is rendered.
If both the values of page-level and the level of the application for the media Type are NULL, text/html is used.
Two of these parameters must be null in your current environment.
(The User Interface definition)
"CSS File URL' value: 'text/css/ir_css_padding.css '.
This parameter must use the static text of APP_IMAGES substitution string:
&APP_IMAGES.ir_css_padding.css
After that, I can't jerome in application. (See the only CSS text in the browser)
--> WHAT IS THE PROBLEM?
APEX is serving pages using the type of text/css media according to the incorrect media Type parameter described above. Remove and the app will return to normal.
4. WHERE and HOW VALUE / reference the CSS file?
I need this change for all interactive reports in my application, self think I can change my model that I use: 'interactive report Region '.
Interactive report region isn't just a region container designed for use with interactive reports. It does not control the appearance of the interactive reports somehow. Not there at - it a report model for interactive reports. Their appearance can be changed using CSS.
-
How to align the areas that fall within GridFieldManager
Hello
I have a GridFieldManager and I want to align the first three fields on the left and the last to the right. I tried to use ad FIELD_LEFT FIELD_RIGHT, but this does not seem to do the trick. Any ideas?
My code:
GridFieldManager grid = new GridFieldManager(3, 4, USE_ALL_WIDTH | NON_FOCUSABLE); for (int i = 0; i < data.length; i++) { LabelField label = new LabelField(data[i].getS1(), FIELD_LEFT | NON_FOCUSABLE); LabelField value = new LabelField(data[i].getS2(), FIELD_LEFT | NON_FOCUSABLE); LabelField unit = new LabelField(data[i].getS3(), FIELD_LEFT | NON_FOCUSABLE); BitmapField pic = new BitmapField(b, FIELD_RIGHT | NON_FOCUSABLE); grid.insert(label, i, 0); grid.insert(value, i, 1); grid.insert(unit, i, 2); grid.insert(pic, i, 3); } add(grid);
Hello
Try using Insert with a style:
grid.insert(label, i, 0, FIELD_LEFT);
Here is the link:
E.
-
How to align the two side by side anchored objects in InDesign.
I put a Word document in my InDesign doc and there are a number of images. They came as embedded images. Some of them I want to appear side by side or in a grid of all kinds. I'm not too familiar with anchored objects. Is there an easy way to align the ups and downs (i.e. ensure that the images are of the same height as the other) so that when they are side by side, they're aligned? Whatever I do for them seems to move them a little bit, but they are not perfectly aligned. Because I can't pick them out and do a typical line up as I would with ordinary objects, I don't know what to do. Sorry if this is a stupid/easy question. Thank you very much!
- Right-click on the selection of an anchored object and choose anchored object > Options.
- In the anchored object Options dialog box, choose Customize from the Position menu and click OK.
- The subject will probably move when the dialog box closes, but because it is now a Custom anchored object, you can drag to reposition.
- Alignment of an object embedded custom to other objects cannot be done with the control panel features line up because the anchored objects select individually, but with benchmarks commented under tension, you should be able to logically position.
Note: you can of course always UN-anchor an object if you want. Simply select cut, press ESC to kill the active insertion point and paste.
-
How to align the chips of the lists to the right of the text?
Hello world
I've updated to the new InDesign CC 2015 and I can't adjust my lists bulleted to the right of the text. I have attached two screenshots: one is in my list and the other paragraph style definition.
Thank you in advance,
John
Here's how you can get the ball on the right side of the text.
- Create a text frame.
- With your cursor in the image, hold down the cmd/ctrl key and choose the command text > fill with placeholder text.
- In the dialog box, choose a right to left language like Hebrew. This will fill your frame with the unwanted text.
- Delete the text and type in the copy that you want to appear
- Apply the list format bulleted text.
-
How to align the Guides?
(Mac OSX, Illustrator CS5)
When you move objects around the editing table, what is the voodoo magic trick to get Illustrator to align the guides? I can't find a setting for this anywhere. Surely, you can align pins with Illustrator, can't you?
Thank you-
Turn on the guides. And set the preferences for them (check 'tools of transformation')
Illustrator aligns with the position of the cursor
Maybe you are looking for
-
public directory macro TestStand
I would like to get the path of TestStandPublicDirectory in an expression by using a macro. Is this possible? Or y at - it another way to get the path of the directory string? Madottati
-
Active Directory information to join 2 forest
Good day - what is the most effective way to gather 2 forest, 2 different entities, grouped into a single domain. I need to move and reorganize our AD structure with a new domain name and move users to the new domain. I think I have an idea, the prog
-
Why has it antivirus analyze more data on hard drive files?
I have always noticed that when I run a full scan of my system, the antivirus scans files that sum up to more than the data in my hard drive.Like when I run a full scan of my antivirus shows (7.0 free Avast) it has scanned 59 GB while the total used
-
I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.
-
How can I fix a windows cannot find cmeauvist.exe problem?