How to export the same original video, only cut short?

Hallo,

I have a lot of Canon EOS 5DM 3, fasteners, QuickTime Movie format. Many are about 2 minutes, and I want only to reduce their time to 1 minute or less and take her. And then simply have exactly the same clip, single cut shorter and without noise. I don't want to compress the new clip or something like that when the export of the BODY again. But I can't find the option to export in agency or Media Encoder how to proceed? Is this possible with a Cloud applications creative as PP, AE, Media Encoder or more?

Thanks in advance,

SebastiaanFP.

You are looking for the Holy Grail. I get it. Slice and rename. Not going not to happen.

The first question is that unless you are shooting all the I-Frame, which is an option on your camera, I think, then the compression method does not lend itself to cutting without recompression on output. So pull on all I-Frame.

You can not do exactly what you want to do with any of the Adobe products I can say, but exports I receive personally export to a very high quality in Premiere Pro are virtually identical to the original.

I suggest that you run the tests of same I fell when I got my camera. Take a small piece of the action. Some people here will remember that I shot footage of myself three juggling beanbags. I did that in order to get a few perfectly still sequences on both sides of me and then have the ability to zoom in on the poufs to see how fast movement watched.

Shoot a short clip, then import, cut a little off each end and export. Compare the two in full screen, zoom to 200%, on an HDTV, you name it. Anyway, you can. If you can actually see a difference, you probably not using the right settings. Import export in Premiere Pro and try to put them on the same sequence and reframe the headrail so that you see the left one and the right on the other side.

For example, I use these parameters with my images to 72 MB/s using 29.97. I also shot 24 fps for a test, but for this example I used the 29.97 video. I exported using CBR because I wanted the smallest change that I could accomplish and VBR certainly makes significant changes. Because I don't like the size of the file, using CBR works for me.

Tags: Premiere

Similar Questions

  • How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

    How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

    Let's say that my height is 22 MB, when I export the file in TIFF or jpg, although careful Iam with size of file settings, size, resolution, I can't manioukate how I want it.

    With jpg I tried everything, no matter what I do or a change in file size or meanless remains the same size - 7 mb instead of 22...

    Please advise,

    Best wishes

    T

    You should not even try to do it.

    JPG uses compression technology, so the files will have to be smaller than the original size of your RAWs. In addition, JPGs are 8-bit, while your RAWs are probably 14 bits, so the size needed to store your image will be smaller.

    Thus, there is absolutely nothing wrong with getting a 7 mb JPG of a 22 MB RAW.

  • How to export the story as text only (txt file)

    Hi all

    I'm doing an export of a document written in TEXT ONLY format, using supplier to export, but I can't find a format name that works for her... I can export to RTF using 'Sangam RTF Export', but 'Text' only does not work for export to txt.

    Can anyone help, please...

    Thank you

    Gustavo

    'Sangam Export text' should do.

    In case you mean that "Text referenced InDesign" also uses the extension "txt".

    Dirk

  • How to use the same point of view as read only in the ADF and editable

    Hello

    How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

    -James

    Hello

    Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

    From slide 14, that's where your use case comes into play

    Frank

  • with Premiere Elements, how share (export) part of my video, not all this?

    Using Premiere Elements, how share (export) part of my video, not all this?

    carol2r

    What version of Premiere Elements you are using and on what computer operating system is running? For now, I will assume first elements 12 on Windows 7, 8 or 8.1 64bits.

    1. place the grey bar activities tabs so that they cover all the timeline content that is to be exported.

    To position the grey legs... Move the indicator of chronology for the beginning of the segment to be exported, you hold down the Alt key, press the [key left hook

    .. [then move the indicator in the timeline to the end of the segment to be exported, you hold down the ALT key, press the right bracket]

    2. the other necessary part of this task is for you to have a check mark next to the option "Share activities Bar only" as part of the export. See publish + share/computer /... Most have the option "Activities part only", some do not.

    Don't forget, you need 1 and 2 of the above to make it work.

    Please provide more details for fine adjustment of the replica. If screenshots are needed, I will post them.

    Looking forward to your follow-up to the top.

    Thank you.

    RTA

  • Slide show, how to clip the same length as the audio file?

    Hello

    I have several PowerPoint presentations and need to do a MP4 video file for each of them. I know how to export the slides in still images, and I also have the audio files into individual mp3 files that correspond to each slide.

    I'm trying to understand the best way to get the slides and audio files synchronized in Premiere Elements.

    Yesterday, I imported all the images png and files mp3 audio in my project. But I had to individually add each image, followed by mp3, and then in the timeline manually stretch the image to make it last as long as the audio file. It was rather tedious and I have a lot of presentations with many slides to work with. I'm sure there must be a better way to make all this happen, no?

    Can someone help me out here?

    1. is there a way to make the clip of the image corresponds to the time of the audio clip?

    2. is it possible to import all the audio files and image (both given that they have the same names) and have PE automatically associate the image with the audio clip?

    Thank you, Derek

    1. you can place audio in Audio track 1 of the first timeline (timeline, no scene)

    2. then remove the image to where the audio file begins. Pressing the «»

    3. slide the end of the clip exactly where the audio ends. Whe you are near the end of audio with drag that he should just stick to it.

    4. the Group of the audio file and image together (right click and select a group after selecting the two together)

    5. Select the clip and make a right click and use the fade-in and out option. You can fade in the video and let the audio simply continue. This makes it look and sound good.

    6. place the audio file next and dedicated to do the same until all of them are made. Stage grouping is not necessary, but if you keep working with PRE, you could thank me just for her!

    I tried these steps as I was typing this post, I can't tell you for sure that PrE10 works as if it was designed JUST for this use case. So hoping you get to finish the project on time and with good quality!

  • How to install the same copy of creative suite on the second computer?

    Basically, I'm on a Macbook Pro and upgraded my hard drive. A

    After that I got the data using time machine, I was unable to access my CS6 applications, which all became the trial version. So I would like to know how to install the same copy of creative suite to the new disk.

    Transfer usually doesn't work - you must install using installation files, in the same way that you originally installed the programs.

    Download and Installation Help-

    https://helpx.Adobe.com/download-install.html

  • How to select the same forms of color in the adobe flash program?

    How to select the same forms of color in the adobe flash program? for example, we assume that 10 forms of rectangle. 3 of them are red and others are green. I want to use only one method or click to select 3 of them. Please help me

    Thanks kunter

    You can use Ctrl + F.

  • I made my largest site and how can keep the same size for all other sites?

    I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

    You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Satellite A80: How to restore the audio and video codecs?

    How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
    I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
    Now, I need to put the video standard in audio codecs.
    I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
    Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
    System Restore came with the message that the restoration was not possible because no changes had been made.

    Post edited by: roel

    Hello

    Try to use the tool "system restore."
    This application restores the operating system to the beginning.
    Maybe it will work.

  • OfficeJet OfficeJet 7612: 7612 - how to set the fax to send only?

    OfficeJet 7612 - how to set the fax to send only? No need to get into the machine. Thank you, Noemi

    Hello

    If you go only to send faxes with this product, you should not disable the receive function to operate correctly. Are you problems with the part of fax machine or you just think you can turn this feature off?

    Thank you!!

  • Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

    Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

    Hi Sailortdt,

    Welcome to Microsoft Community where you can find the answers related to Windows.

    According to the description, it looks like you are facing a problem with network connectivity.

    It would be awesome if you could answers to these questions in order to help you further.

    1. have you made changes on the computer before this problem?

    2. you receive an error message or error code?

    I suggest you to see the steps in the following Microsoft article and check if it helps.

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • How to map the same tag of the element with a different value in BI Publisher rtf model.

    Hello

    I have an xml file with the same name in the < tag > element and I do not know how to associate the same < tag > element to different string in the document rtf template attribute.

    For example: "' Eswitch <number > is repeated in this xml file, when I am mapping this element to the document rtf with a different string, I have same value 'D00002 ' . I should get values D00002 and DMR00002.

    < document >

    < TitleBlock >

    < number > D00002 < / number >

    < itemType > Document < / itemType >

    < lifecyclePhase > preliminary < / lifecyclePhase >

    < description > gtedgg < / description >

    < shippableItem > n < / shippableItem > < / cartridge > < / Document >

    < DMR >

    < TitleBlock >

    < number > DMR00002 < / number >

    < itemType > DMR < / itemType >

    < lifecyclePhase > preliminary < / lifecyclePhase >

    test nomenclature model bom1 < description > < / description >

    < POS > < value > Test < / value > < / POS >

    < shippableItem > n < / shippableItem > < / cartridge > < / DMR >

    < / AgileData >

    I followed steps below for map document model rtf with the same tag xml with a different value.

    1. install Office word 2013.

    2 BI Publisher for desktop software installed. It will add a BI Publisher plugin to the word document.

    3. with the help of desktop publisher BI, created a model of document rtf file.

    4 imported the document rtf template example xml file.

    The data is loaded successfully.

    5 tires model rtf field symbol to map the tags to xml to rtf document attributes element.

    7 saved the document in PDF format.


    Thank you

    Please mark it correct so that it is useful for others to find the solution to a similar request.

  • How to export the Indesign to Format XML using JavaScript document

    Hi all...

    Can someone help me, how to export the indesign document to XML Format using JavaScript...

    Thanks in advance...

    doc.exportFile ( ExportFormat.XML, File(Folder.desktop+"/doc.xml" )

  • What is the best way to resize an image, but keep the height and width of the same original size or format?

    What is the best way to resize an image, but keep the height and width of the same original size or format?

    I tried to use the function of the size of the Image, but when I changed the size of the image, the width has not changed with it.

    Thanks for the tips!

    Hi Landon.Luu,

    You want to keep the relationship between the width and height to be the same?

    Click the constraint between width and height to keep the ratio intact.

    Kind regards

    Claes

Maybe you are looking for