Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

Similar Questions

• When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  Hi Stephen39,

  Do you have any 3rd party plugin installed for Adobe Reader? If not, close all instances of Adobe Reader running and delete the entire folder to: C:\program Adobe [version] \Reader\plug_ins.

  Now go to control panel > programs and features. Locate the entry for Adobe Reader X and choose to repair the installation.

  If you do not have a 3rd party plugin installed, try to uninstall them and see if the problem is related to the same. If it works, let me know what plugins have been the origin of the problem so that I can have a look.

  If all goes well, this should fix things.

  Thank you

  Nicos

• maintain the same identifier of session for several sessions

  This problem started as a matter of (secondary java) at the end of fonts, but I need to understand the side Oracle. So I raise here.
  
  Let's say that a user makes the call to Oracle in two (or more) connections. Each connection will begin a new session.
  
  On the first call, the user connects to the DB and then run a stored procedure to insert data in the parent table, which then returns a primary key.
  
  Then the user makes another call to Oracle (where a new session), run another stored procedure and pass the primary key, so that a line can be inserted into the child table (dependence).
  
  In doing so, I need the second connection to share the same session as the first. So for the first and second connections, I coded to perform the following duties
  
  DBMS_session. Set_Identifier('100');
  DBMS_session.set_Context ('ACCOUNT_CTX', 'ID_compte', ' 0');
  
  But the second call (one to insert a row in the child table) does not always complain that the foreign key does not exist in the parent table.
  
  This indicates that the system considered the second connection as a distinct and different session, so the primary key inserted into the parent table (by the first call) is not seen by the second call.
  
  
  I can keep the two connections in the same session, which could be the solution (side Oracle) or a suggestion?
  
  
  Thank you.
  
  Published by: scottjhn on December 2, 2012 19:30

  >
  This problem started as a matter of (secondary java) at the end of fonts, but I need to understand the side Oracle. So I raise here.
  >
  Yes he did - and I answered it there.
  When you cross-post, you must at least provide cross-cutting for other threads links so that people can follow what is being discussed.
  JDBC mutiple inserts on the side of java (to keep the same session)

  Will change your other thread and provide the link to this one.
  >
  I can keep the two connections in the same session, which could be the solution (side Oracle) or a suggestion?
  >
  As I said in the other thread: the same session to insert parent records and child needs either, you must commit after insertion of the parent record.
  >
  On the first call, the user connects to the DB and then run a stored procedure to insert data in the parent table, which then returns a primary key.

  Then the user makes another call to Oracle (where a new session), run another stored procedure and pass the primary key, so that a line can be inserted into the child table (dependence).
  >
  The second call should not be a new session. You can use the same connection that you used for the first call. But if you use two connections or two sessions of the first session was committing its work or the second session will not see it.

• How to use the same mask, stencil, etc for several layers? Photoshop equivalent of the masked group?

  Hi I spent over half an hour for search manual, forums and the Internet and still can't find the answer. Help, please!

  For example, in a model with 5 or more layers, I want to use the same mask or stencil or what can hide layers 2,3 and 4 but areas layer 5 and all other possible layers below should not be affected.

  1. Before dialing the layers that you want to hide and apply a matte for the demo using the mask. Think to the Dial as an equivalent to the creation of a layer group.
  2. Use the effect on each layer you want to hide. It's easier to do if you apply mast set once and then create an animation preset to apply to the other layers. Just get mast set to do what you want it to do on the first layer, select Set Matte in ECW or in the timeline panel, and then go to the Animation > Save animation preset. Select then all other layers you want to apply the set matte to apply the preset.
  3. Put the mask at the bottom of the layers that you want to hide and turn on the switch to preserve transparency, then this group in composition with other layers of nesting.

  Here's another tip. You can set a custom color for all the layers you want to use the mast, then use the custom color for a group selection. This can make things easier down the line.

• Download app with the same name in appworld for several handsets

  Hello

  I have developed an application and I gt the appworld account. I want to download my app from appworld now. My app supports Blackberry "BOLD", storm and torch curve. But I don't want to make only one application, coz that will increase its size. I want to make it as 4 separate application and download the appworld. But I want to download apps with the same name and features. I want that if a person search for the application in appworld having diff phones, the same name should be displayed, and not just for the bb bold AppName_bold, curves en AppName_curve. It is therefore possible to uplaod app with the same name but different models, while wen someone download the app, appropriate model will be get downloaded in its ph

  You are welcome. On App World, you just download the parent. COD. No need to unpack the parent in the siblings. COD or download files the. JAD.

  Scott

• I use Windows Live Hot Mail... and have the same problems as the previous person, asking a question on their e-mail. The only option I have to choose tools are on internet option. It's not correct my problem front of e-mail... suggestions?

  I use Windows Live Hot Mail... and have the same problems as the previous person, asking a question on their e-mail.  The only option I have to choose tools are on internet option.  This is not fix my problem before the email (to make changes to the police and have the new police to stay)... of suggestions?

  Hello, please send your application in the Windows Live Hotmail Forums.  Here is the link...

  http://answers.Microsoft.com/en-us/windowslive/default.aspx

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

  Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

  This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• remove the pop up message "Waiting for in time real (target CompactRIO RT) to answer.

  Is there a way to remove the pop-up message "Waiting for in time real (target CompactRIO RT) to answer" what power is removed the cRIO or when the network cable is disconnected?

  Hey Danny,

  How did send you the commands to the Windows PC the cRIO? You use the remote FPGA host Interface?

  I've seen the pop-up dialog box when the LabVIEW project is not present.

  If you create a Windows VI that sends orders via shared variables or other network mechanism to a VI RT, which in turn controls your FPGA VI, then you should not ever see the popup you speak.

  This tutorial walks through creating an example of monitoring on cRIO with three screws as indicated:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11199#toc4

  This tutorial is an example of the use of a shared variable to implement a heartbeat, to determine if the cRIO is connected:

  http://decibel.NI.com/content/docs/doc-11046

  I hope this helps.

• My DNS server is not responding. I searched on the internet and many people have the same problem and

  I searched the internet and many people have the same problem and there are 1 million different web pages that deal with this problem.

  I've run several virus scans and removed all except modifier browser called "zwangi."
  I emptied the cache and set the IPv4, IPv6 auto settings and.
  Can someone help me here please?
  Thank you.

  This forum is for Microsoft Security Essentials.

  I suggest that you re - post here->

  http://answers.Microsoft.com/en-us/Windows/Forum/networking

  You can also Bing - dns server does not - and find answers like this->

  http://TechNet.Microsoft.com/en-us/library/cc787724 (WS.10) .aspx

• Driver went on a pad and perform a system restore, the hardware is not installed but the same problem.

  I have Vista Home Basic. I have a HP printer that whenever I logged in re-installed drivers. So I decided to uninstall all printer and software and re-install fresh. All seemed well and good work but if I restart or stop and come back on the laptop tells me a driver went on a buffer and performs a restore of the system. The system restore seems to work and restores me awhile before I re-installed the printer. But again if I restart or stop it has the same problem. the pilot and buffer. I have not yet installed or reconnect the printer because it restored. I don't know much about computers and I don't know what to do. I wanted to kind of do a clean install of Vista but it comes preinstalled on my laptop so I don't have a disk and that I read removing the drivers does not seem an option.

  Hi ChristopherParvin,

  You did it happen any changes made to the computer before the show?

  Method 1: Try the following steps.
  a. log in your computer using an administrator account.
  b. Click Start and then click Run.
  (c) in the Open box, type regedit and then click OK.
  d. Locate and click the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\LPTENUM5. Right click on the registry key and then click on remove.
  e. under confirm delete key, click Yes.
  f. close the registry editor and restart your computer.
  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest to install the drivers of clean boot and then restart the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• If you bought a laptop and you want to install Windows 8 Professional, can install you it directly or you must have a base like Windows 7 Stater license?

  Original title: installation of Windows 8.

  If you bought a laptop and you want to install Windows 8 Professional, can install you it directly or you must have a base like Windows 7 Stater license?

  Hello

  The only FULL of Windows 8 Pro version would be the OEM System Builder... everything else is an upgrade...

  Unlike Win 7 and earlier versions, Microsoft is not offering one COMPLETE Win 8 other than OEM package...

  The difference is that the OEM version has no support from Microsoft... If you have a problem, you are on your own... Just enjoy the Forums and for any issues that arise...

  Providing that there are drivers available for your laptop to win 8, it should work...