How to filter the doc and xml using SDKFileOpenChooser?
I need to filter only word and xml
SDKFileOpenChooser openChooser;
openChooser.AddFilter (291, "App_Filter"); 291 for app
openChooser.ShowDialog ();
Where to find the ID of the extension for the filter application or any solution?
To display only the XML using SDKFileOpenChooser files use:
openChooser.AddFilter (kXMLFileTypeInfoID, "files (xml)" "") XML;
To Word files, try to use kMSWordFileTypeInfoID instead.
Tags: InDesign
Similar Questions
-
How to delete the duplicate and photos using windows 7 x 64 bit?
I have a new computer using windows 7 x 64 bit. I noticed a lot of photos and files duplicate on my hard drive. It seems that any device that you plug into the computer it automatically records in the library under documents, music, pictures, etc... When configuring my e-mail or import/export does duplicate the same info, instead of ask or inform it is a duplicate. Help someone. I can't go directly to MS supports without going through many unnecessary changes. I JUST WANT TO KNOW WHAT I CAN DO?
Hello
If you look at the odds on these files, you can just about bet that they are safe to use.
Auslogics has 4 stars which is a good rating at Cnet.
Glary Utility has 4 1/2
Need3Space - writing is here - 4 stars (not freeware)
Duplicate File Finder - 4 stars
Pay attention to the files you want to delete. You will find a list of formats of files here.
http://en.Wikipedia.org/wiki/Windows_file_types
http://en.wikipedia.org/wiki/List_of_file_formats _(alphabetical)
The digital negatives (RAW files) are safe remove. These are digital files, camera or scanner, left on the disk, usually after photo/printing has been removed from the folder my pictures...
http://en.Wikipedia.org/wiki/Raw_image_format
Check the links classified by Ronnie Vernon for a better understanding of the libraries and files.
-
How to monitor the database and listener using grep
Hi all
This may sound simple, but I need to know.
How do you analyze 2 processes and database listener using ps - ef | grep pid.
I tried now
My need is a single command to show the status of pid 22671 and 23116[oradb04@dbserver ~]$ ps -ef|grep lsnr oradb03 7044 1 0 2009 ? 00:03:53 /oracle/fdqmdb/10.2.0/bin/tnslsnr FDQM -inherit oradb05 13504 1 0 2009 ? 00:00:15 /oracle/fdqmsitdb/10.2.0/bin/tnslsnr FDQMSIT -inherit oradb01 21066 1 0 Jan07 ? 00:11:27 /oracle/hypdevdb/10.2.0/bin/tnslsnr HYPDEV -inherit oradb04 23116 1 0 2009 ? 00:06:56 /oracle/hypsitdb/10.2.0/bin/tnslsnr HYPSIT -inherit oradb04 25605 24208 0 23:04 pts/0 00:00:00 grep lsnr [oradb04@dbserver ~]$ ps -ef|grep pmon oradb01 3589 1 0 03:21 ? 00:00:02 ora_pmon_HYP11DEV oradb03 4097 1 0 2009 ? 00:00:01 ora_pmon_FDQM oradb05 12831 1 0 2009 ? 00:00:04 ora_pmon_FDQMSIT oradb04 22671 1 0 2009 ? 00:00:37 ora_pmon_HYP11SIT oradb04 27517 24208 0 23:05 pts/0 00:00:00 grep pmon [oradb04@dbserver ~]$ ps -ef|grep lsnr oradb03 7044 1 0 2009 ? 00:03:53 /oracle/fdqmdb/10.2.0/bin/tnslsnr FDQM -inherit oradb05 13504 1 0 2009 ? 00:00:15 /oracle/fdqmsitdb/10.2.0/bin/tnslsnr FDQMSIT -inherit oradb01 21066 1 0 Jan07 ? 00:11:27 /oracle/hypdevdb/10.2.0/bin/tnslsnr HYPDEV -inherit oradb04 23116 1 0 2009 ? 00:06:56 /oracle/hypsitdb/10.2.0/bin/tnslsnr HYPSIT -inherit oradb04 27520 24208 0 23:05 pts/0 00:00:00 grep lsnr [oradb04@dbserver ~]$ ps -ef|grep 23116 oradb04 23116 1 0 2009 ? 00:06:56 /oracle/hypsitdb/10.2.0/bin/tnslsnr HYPSIT -inherit oradb04 27661 24208 0 23:06 pts/0 00:00:00 grep 23116 [oradb04@dbserver ~]$ ps -ef|grep 22671 oradb04 22671 1 0 2009 ? 00:00:37 ora_pmon_HYP11SIT oradb04 28774 24208 0 23:06 pts/0 00:00:00 grep 22671 [oradb04@dbserver ~]$ ps aux|grep 22671 oradb04 22671 0.0 0.0 3295640 23896 ? Ss 2009 0:37 ora_pmon_HYP11SIT oradb04 32317 0.0 0.0 61088 700 pts/0 S+ 23:09 0:00 grep 22671 [oradb04@dbserver ~]$ ps aux|grep 22671|grep 23116 [oradb04@dbserver ~]$ ps aux|grep HYP|grep 22671|grep 23116
Kind regards
SamIf you use Linux, you can try ps - fp
: $ ps -fp 4738 18890 UID PID PPID C STIME TTY STAT TIME CMD oracle 4738 1 0 2009 ? Ss 0:06 ora_pmon_DB102 oracle 18890 1 0 Jan04 ? Ssl 0:01 /oracle/app/oracle/product/10.2.0/dbhome_1/bin/tnslsnr LIS
-
How to trace the temperature and voltage using the graph of Mixed Signal
Hello
I use the NOR cDAQ-9178, module NI 9214 (temperature) and the module NI 9201 (voltage). My program allows the user to choose among 3 different tasks, Masurement of temperature, voltage, or both. When you select the task for temperature and voltage measurement, I was drawing all channels on the same graph. I was invited to separate channels of temperature and voltage and draw on a split graph, using the same category axis. I tried stacking, but could not control where each parcel channel went. I think the Mixed Signal graph would work well. Everything works and records all the data of the channels to the files, but my plots appear not on the graph, although I can see the change in scale numbers. I think I can use the cluster incorrectly. Can someone tell me what I am doing wrong? I selected the 'Plot Visible' option, but the plot is not always displayed. I've attached a zip with all the screws needed to run my program. The main VI is "Voltage_Temperature_SingleTask_Measurements_MAIN.vi"... but everything must be downloaded to the program works. Please help... Thank you.
Hi mzhlb,
I complained only the expressVIs.
Why not use simple IndexArray function to get bots waveforms of your waveform table? (I faked it your DAQmxRead with functions SigGen).
-
How can I the date and time using regular expressions
Hi all
I have depolyed filtering the log agent. While setting properties, I would like to recover the file that is generated at the present time, but along the way, I am unable to define, what regular expression that I provide retireves date and time specific file...
Leave with kindness, men know is it possible to do?
Thanks in advance.
Shiva
This seems to be the same question I can't add a timestamp in logfilter, so I'll answer in this thread. Please check the two wires as "Answered" when the issue has been resolved.
Kind regards
Brian Wheeldon
-
How we can filter the members of attributes using MDX ASO
How can we filter the members of attributes using MDX ASO?
SELECT {Descendants ([1_Account], LEVELS([1_Account],0))}
ON COLUMNS,
{Filter (different 1_Cost [Online], 1_Cost [Online]. CurrentMember = [1_AllocAccountR]. [85151010])} on the LINES
OF Alloc1R.Alloc1R
WHERE ([DC], [GenealogyAllocation], [Bill], [FY14],
2_Cost [Online]. [Impact], [3_Cost online]. [Impact], [4_Cost online]. [Impact], [5_Cost Center_intra]. [Impact], [2_Project]. [Impact], [1_Project]. [Impact]
)
The code marked in yellow, is suppose to filter and to provide an output only the cost that has 85151010 attribute tag - Center but it generates all cost centers
Thank you
Vishal
How about using attribute or WithAttr
Concerning
Celvin Kattookaran
-
How to install the plugin and outside the filter in photoshop cs? and all the Special filters for special effects?
Please recommend me a better and such me step by step how I'll add more plugins n filter
One I normally come with an installer or installation instructions. See the documentation for the plug-in you are trying to install. It sounds like you don't know what plug-ins you want to install. In this case, you don't need to install a. At some point, you can read about a plug-in and what she can do and you feel you need it. Then you will have a reason to install a plug-in that is not installed by default. There may be a cost involved more useful plugins are not free.
Adobe Plug_ins optional downloads are Plugins Adobe want from Photoshop and is no longer installed by default. Also at some point is no longer will install in the course Photoshop Adobe will remove the functionality or use of interfaces. For example CS5 optional plugins install in perpetual CS6 Windows version 13.0.1.3 but not in version 13.1.2 subscription or perpetual Mac version 13.0.6 fot its 64-bit only and CS5 Mac Optional Picture package plug-in is a plug-in of only 32-bit.
You will need to keep older versions of Photoshop if Adobe remove features you use in newer versions of Photoshop.
-
How to filter the by using (-) less symbol.
Hello
We use oracle EBS as OLTP. Sale of data stores the PO_HEADERS_ALL, PO_LINES_ALL table, which contains data of rejection/cancellation order.
Rejected/cancelled in data store also the same tables. We are able to identify the base denied/cancelled quantity indicated (-) less symbol. (Example: Qty:-30), and the Amount column is also indicated as (-) less symbol. So, how to filter the data on quantity everything is indicated - less symbol in OBIEE.
Kind regards.
CHRJay wrote:
IF it is set to digital use function of cast to convert to a char, then using as check the reason for the less to be filtered in the filter condition formula.If you want to filter all values of negetive, then use filter: measure<0 in="" filter="">0>
Hope this will help you.
Thank you
Jay.If the column was purely digital, why cast to CHAR? The OP can do everything suggested Robert Angel. My suggestion was where there was some other non-numeric values in the column that could be the reason why the column is CHAR, then using the SIMILAR filter operand would solve this problem.
The first part of your suggesting was not necessary if the column is a numeric data type and the second part was just a repetition of what Robert.
-
My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space
Hello
You want to know is explained here: https://www.apple.com/support/iphone/backup/
If you want to delete the backups that are currently clogging up your iCloud-storage space, use this: iCloud: delete a backup device iOS to iCloud
-
How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?
I found a solution! -Set the size and position of the façade with the help of the
File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).
then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.
OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.
-
How to open the sounds and audio properties by using Labview
Hi all
How to open the sounds and audio properties of the control panel using the exe from system Labview vi.
Y at - it all dll also open this property.
If there is some dll which is which and how to program the dll to achieve my goal.
Wow, you followed after a few...
Open the command window is because to open the Control Panel, you need to execute it in the context of a shell, and it's what is done with the "cmd /c mmsys.cpl. To open the applet without using cmd you use RunDll32.exe, like this:
-
How to find the right server to use windowsmail to send and receive e-mails?
How to find the right server to use windowsmail to send and receive e-mails?
Who is your current e-mail server? (Which is after the @ in your address).Windows Mail: Setting up an account of end-to-end
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish -
How to filter the modules of the version of TB?
My version of TB: 31.1.2 on Win7
The Add-ons Manager has a section called "Featured addons". I think that, Hey they must be cool if they are featured! I try "Contacts Sidebar" only to discover that it was updated in 2007 and does not support recent versions. How to filter the Add-ons to display only those compatible with my version of TB?
All the people who still use older computers from apple. This is the last version that will run on them.
-
How to remove the variable created when using definedNamedWhereClauseParam()
Hello
My Jdev version 11.1.1.7.0.
I'm Executive where clause programatically where I need to bind two bind parameters under certain conditions. Example, I have two bind variables X, Y.
Here's the problem:
Assume that the first time I'm setting one variable X, so I define X bind variable and execute the query.
What second time I send only Y but not X. In this implementation of the scenario of VO throw an exception, given that the variable X is already created in the VO object and where clause does not have this setting.
So how to remove variables created in the original Version all in definedNamedWhereClauseParam(). I need to erase what ever the previously created variable every time I execute method.
I can make the similar functionlity using setWhereClauseParam (using literals). But I have a few technical restrictions for use.
Could you please help me how to remove the variable before vo using definedNamedWhereClauseParam.
Caused by: java.sql.SQLException: try to set a parameter name that does not intervene in the SQL: itemNumber
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:15969)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:911)
at weblogic.jdbc.wrapper.PreparedStatement_oracle_jdbc_driver_OraclePreparedStatementWrapper.setObjectAtName (unknown Source)
at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:4669)
at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3687)
at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:22742)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1298)
... more than 96
Thank you.
-Diette.
Published by: Vidya Diette on February 28, 2013 08:43Hello
You need access to the variable Manager. Order of reading in the JavaDocs:
http://docs.Oracle.com/CD/E28389_01/apirefs.1111/e10653/Oracle/JBO/ViewObject.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManagerOwnerBase.html#getVariableManager%28%29--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableValueManager.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManager.html#removeVariable%28java.lang.String%29
Frank
-
How do you the bookmarks and history buttrons open boxes in Firefox 33?
How I make the bookmarks and history buttons open their respective boxes instead of having to use the submenu stupid button on the sidebar?
Apparently, the Restorer of classic theme worked for Firefox 29, but it does not work for 33:
https://support.Mozilla.org/en-us/questions/991080There are two sets of buttons of toolbar tools for history and bookmarks in the palette to customize with the CTR extension installed. You need those without drop marker to open the sidebar.
Maybe you are looking for
-
In the implementation of facial recognition login, you are able to Zoom image and take pictures of the sample. This allows the site further from the screen in a normal working position. However, when you try to connect at startup, the system returns
-
Satellite Pro P100 PSPAEE guard screen goes white/black
I have a Satellite Pro P100-PSPAEE running Vista Ultimate. Recently, the screen started going black and white during the day. It does not seem to be asleep like nothing refreshes the screen. All I can do is hold the power button and restart the lapto
-
Satellite 5200 701: which cable should I connect to PJ2 port on motherboard
Hello world. Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager. When I opened the folder, I found the motherboard has an empty on port marked PJ2.When I looked i
-
Battery life after upgrade of the El Capitan is very bad
Since the upgrade to El Capitan, it seems that my battery drains quite quickly. Here is my EtreCheck report. Please advise on what I need to do to get back to normal. Thank you EtreCheck version: 2.6.6 (226) Report generated on 05/01/16 15:03 Time
-
L540 stops around the bottom/spear its OK but not WILL NOT RESTART
I have a new L540 who arrived inoperatve - button / stop does not work. He sent back the deposit, and after 2 weeks he received is back with a new card system and 3 other parts replaced. After loading Windows 7 with no problems, the first time that I