How to find capabilities of scanning with C5180 all in one with Windows Vista? CC = en
I can print with C5180. I can't scan. When I go to programs on my Windows Vista computer, I can see is no longer my unit indicated. I tried to reinstall the disc that came with the device. Install doesn't work.
Hello RDB49 and kethyinmo
Try the following procedure. It will remove the HP software and software that can cause problems. Please let me know if any of you have problems.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
10. run the download to reinstall the printer
Tags: HP Printers
Similar Questions
-
How can I convert a text scanned a C5180 all in one for use in Word?
I recently bought a new IMAC and spin the Mountain Lion. When I tried to scan a document using the software that came with my C5180 all in one that I received a message that I have to use the Apple software to the place. I followed the instructions on the HP site and succeeded to the digitization of the document. My C5180 comes with OCR software that allowed me to convert the image into a text file. When I scan text by using the Apple software I can create a number of different output - PDF, TIFF, PNG formats - but I can't edit in Word (or something else I think). Does anyone know a solution to this problem before you spend $199 for Adobe Pro X?
Thank you.
Hello
Capacity Unfortuinately OCR is more provided by the software solution provided for Mountain Lion.
In addition, be aware that Adobe Pro will give you not directly from the scanning program - Adobe applications require compatible devices Twain, Mac OS drivers provided only with the support of the ICA-interface.
You will need to use any 3rd party for this purpose OCR program, using Read Iris as an example will be more convinience because it support the ICA compatible devices.
There might be additional OCR solutions, I don't personally know this.
Kind regards
Shlomi
-
How to fix tha software incompatible with windows vista
only compatible with windows vista program
Hi areksuroboyo,
Is what program this? If it is not compatible with Vista, but worked on XP or lower then you tried "compatibility mode"? Try right clickinging on the setup.exe file in the program you want to install. In the drop-down menu, select properties and then click on the tab "Compatibility" set the compatibility to Windows XP and see if it will install then.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com
-
Find the printer driver for HP all-in-one running Windows 8
I just bought a HP Pavillion 23 all in one running Windows 8, I am trying to find a driver for an existing printer, Canon ImageClass D480 I have serious problems, thanks for any help
Hi Jan,
Welcome to the HP Forum!
You will find not software Canon printer here on the site of HP - you have to find the Software Support Canon printer.
Try here: imageCLASS D480 driver
It seems there is a level of driver for Windows 8 support - if it is "full feature software" support or some form of basic driver support is something, you can determine when you visit the site and software.
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
-
How can you make Maplestory compatible with Windows Vista?
I have a 17 Studio and just download Maplestory successfully. When I try to play the game, it says 'known complatibility issue blah blah blah'... and then said the game is not compatible. ?? Obviously, I'm not the only one facing this problem, and I think it's shocking the heart of Maplers everywhere. Thank you!!!
Click with the right button on the Launcher, click Properties, and then select the Compatibility tab and choose the Windows XP Sp2 compatibility option and it will work for you.
-
How do scan you a document from the printer to the computer using a c5180 all-in-one printer
I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do
Use the HP Solution Center to scan at the printer to the computer.
HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.
-
You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/IECs/threadsI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Scan driver for HP Photosmart C5180 all-in-One
I recently replaced my hard drive and while my printer (HP Photosmart C5180 All-In-One) works fine, I have no more scanning software. When I insert the installation disk I get a message saying that the software is not compatible with Vista (Home Premium). All I can find on the site of HP's software driver. This disc was used to work on this computer. The only difference I can think is that Vista has been updated. Where can I find analytical software that works on my Vista OS update?
Try this driver for Vista
-
My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.
My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.
Hello
Is the printer connected to your PC by USB or network?
Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.
Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2
Kind regards
Shlomi
-
Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210
Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.
Moved from feedback
Original title: scan driver
Hello Timmy,
Please take a look at the following link for the driver\firmware for your printer.
KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems
If this is not enough, you may have contact with Kodak support for the same. Thank you.
-
How can I disable smooth edges of fonts with Windows Vista?
Please, please... I need help from someone obviously smarter than I am. I thought I was just on the pc, but I've proved very obviously I was mistaken.I would greatly appreciate any help someone could give me about the following question. I ' v tried the search with the help of Windows Vista, myself, but again, I'm obviously too stupid or slow down and have not been able to find the answer there either. He who can give me the answer, I would be so grateful, I got lov to reciprocate somehow I can, like research, graphics, or any work that I can because that would really mean a lot to me.So, here is my question:How can I disable smooth edges of fonts with Windows Vista?
BexHello
I suggest you to return the item and check if it helps:
ClearType: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/ClearType-frequently-asked-questions
-
I need to reinstall a Dell 968 printer/scanner to a computer with Windows Vista. I can't find my instruction manual. Can someone tell me what to do? Printer works but when I scan something, the information does not go to the computer so that I can work with it.
Hello
Here are the drivers for your printer
and here's where to download this manual for her of
-
I use WIN XP as my main OS and I want to ugrade it for WIN VISTA Home Premium, but the ADVISOR WINDOWS VISTA is no longer available! How will I know if all my components are compatible with WINDOWS VISTA before I buy it?
Hello
You should check with the manufacturers of hardware and program
and use the Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/
and read the vista system requirements
http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements
__________________________________________________________________
But Microsoft sells more than Vista.
They switched to Windows 7
If you are lucky, you could always find a copy of Vista to your local computer repair store
___________________________________________________________________
Why not see if your device is Compatible Windows 7
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
-
Canon MP250 will not scan with Windows 7. 2,155,2 error code
Canon MP250 will not scan with Windows 7. 2,155,2 error code
This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.
This is the message that comes with the 2,155,2 Error Code:
Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.
They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.
Also, I get the following message when I plug in the printer:
USB device not recognized.
It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.
Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.
Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?
I tried to install the updated driver manually, because Windows does not find a driver for this printer.
It drives me crazy, slowly. Can anyone help?
Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.
Instead, please answer your original on the subject (this one) thread.
It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)
@BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81
Thank you.
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
Maybe you are looking for
-
Graphical evolution of positions programmability
Is there a way to change chart position based on a State of your VI? For example: I want to spend two charts based on a type of test. The cards are of different sizes. I know I can just wire the cards in my code, but what changes should I make labels
-
Personally, I am frustrated to discover file that are currently hidden by vista. For example my temporary Internet folder located in my Temp folder If I open Explorer and browser to the Temp folder is empty - no doubt. It doesn't even have a drop d
-
Aspects of file sharing.
Error mEssage =The specified network folder is currently mapped using a different user name and passwordTo connect using a different user name and password, fist disconnect existing mappings to the network share I have been through all the network sh
-
Area 51 - R2, CPU socket LGA 2011 version 3?
Hello, is the area 51 - R2 CPU socket LGA 2011 version 3?
-
Encryption AES/ECB/PKCS7Padding
Dear developers I am converting an application from Android native BlackBerry 10. The application uses AES to encrypt the data. So I went looking for how to do in BlackBerry 10 but it seems not as simple as that. In Java, it looks like this: Byte []