How to find out of control data which doesn't layout components?

Similar Questions

• How to find out what the police are actually using Firefox?

  How to find out what the police are actually using Firefox?
  Inspect the element don't say what substitute fonts.

  Firefox 24 ESR has the tab fonts in the Inspector, which shouldn't be a problem.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• don't know how to find out the server for my email information.

  I had to reinstall Windows Vista (my computer was a mess), and now I don't know how to get information on the mail server

  I don't know how to find out the server information I need

  to set up my email again.

  Also, my pictures 'lost' since I have done this?

  Hello

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail, too:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  A relocation normally wipes the hard clean everything, as part of the resettlement process.

  Two things you can try:

  1. find a windows.old folder (depends how you reinstalled Vista)

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  2. This program has had good results in data recovery in circumstances similar to yours.

  http://www.Piriform.com/Recuva

  See you soon.

• Please inform me how to find out what is my user name.

  Please inform me how to find out what is my user name, so that I can install my upgrade to Flash Player.

  What userid & password should I install Flash Player?

• Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Yes, I assumed that was the case, and I thought that this link addressed to her.  I would have thought it was more a function of your network and the OS than Photoshop.

• How to find out if the new menus or responsibilities have been added to the system

  Dear Sir
  
  Please let me know how to find out if the menus or the responsibilities have been added to the system.
  
  OUL5 x 64
  EBS r12 12.0.6
  
  Thanks-Tom

  It is a unique work, or you should always know when a new menu/responsibility is added?
  If it is a time of employment, then you can write a query on the 2 tables (fnd_menus_tl and fnd_responsibility_tl)

  Select * from fnd_menus_tl where creation_date > sysdate - 7

  Select * from fnd_responsibility_tl where creation_date > sysdate - 7

  If you need to do every time, then you can write an alert.
  Go to a responsibility to Alert Manager > alerts > set
  Process = system administration
  name = my Menu new alert
  Click event
  Check the insert box, clear the check box update
  application = application object library
  Table = fnd_menus_tl (or fnd_responsibility_tl)
  Select = Select responsibility_name in & output1 fnd_responsibility_tl where rowid =: rowid
  or, select user_menu_name in & output1 fnd_menus_tl where rowid =: rowid
  Save
  define an action
  attribute to the set of scripts
  make sure click the alert details and enter installation details

  Hope that answers your question
  Sandeep Gandhi
  Independent consultant
  513-325-9026.

• How to find the last update date, time and user of the file field peoplecode

  How to find the last updated date time fields of peoplecode records?
  
  Thank you.

  We can check the update date-time using the following query

  SELECT LASTUPDDTTM IN THE PSPCMPROG WHERE OBJECTVALUE1 LIKE "RECNAME" AND OBJECTVALUE2 AS "FIELDNAME".

• How to find out the Windows Update Agent version I am running

  Anyone know how I can find out which version of the Windows Update Agent I use?  I checked everything and no menu where only allows me to check the version.  This link http://support.microsoft.com/kb/949104 tell me how to get the latest version, but it is not to tell me how do I know if I am running on the latest version.
   
  And what makes it reset my of update windows components?  I read this link (http://support.microsoft.com/kb/971058#appliesto) and understand how to reset components, but I'm not clear on how this will affect my windows update.

  I have Windows Vista Home, SP2.

  Thank you very much!

  Ohanna Hello,

  Thank you for using the Microsoft answers Forums.

  Determine the current Version of WUA:

  Determine the version of Windows Update Agent (WUA) before using it. The current version of WUA is determined by the version of the c:\windows\system32\wuaueng.dll that runs in the current installation of Windows \System32 directory. If the c:\windows\system32\wuaueng.dll is version 5.4.3790.1000 or a later version, WUA is installed. A version earlier than 5.4.3790.1000 indicates that the Software Update Services (SUS) 1.0 is installed.

  When a call is made for SUS 1.0 using the API INTERFACE, an HRESULT of WU_E_AU_LEGACYSERVER is returned.

  You can also use the IWindowsUpdateAgentInfo::GetInfo method to retrieve the latest version of file of the c:\windows\system32\wuapi.dll that runs on a computer. The IWindowsUpdateAgentInfo interface is not supported in WUA 1.0.

  For more information, see update the Windows Update Agent.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• How to find out the name of the current day

  Hello
  
  How to find the name of OBIEE11g today.

  Use the name of DAY formula

  ex: day of the WEEK (the "Closing Date") or DAYNAME (current_date)

  Score pls correct/useful also to your old posts!

  If account information is not help pls update with your solution for these positions

  How variable to calculate n SUP...
  Re: Problem with top N...
  Problem with Dyamic varibles.
  How to create the Global filter...

  Published by: Srini VIEREN on 17 December 2012 10:05

• How to find the most recent date prev?

  Hello
  
  Here is the sample table and sample data.
  

  CREATE TABLE t1 (code NUMBER, dt DATE, price NUMBER)
  /
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/21/2012', 'MM/DD/YYYY'), 10);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/22/2012', 'MM/DD/YYYY'), 10);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/23/2012', 'MM/DD/YYYY'), 12);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/24/2012', 'MM/DD/YYYY'), 9);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/25/2012', 'MM/DD/YYYY'), 8);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/26/2012', 'MM/DD/YYYY'), 13);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/27/2012', 'MM/DD/YYYY'), 11);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/28/2012', 'MM/DD/YYYY'), 15);
  Insert into T1 (CODE, DT, PRICE) Values (2, TO_DATE('10/29/2012', 'MM/DD/YYYY'), 15);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/30/2012', 'MM/DD/YYYY'), 13);
  Insert into T1 (CODE, DT, PRICE) Values (1, TO_DATE('10/31/2012', 'MM/DD/YYYY'), 13);
  COMMIT;

  I have to read the table so that I got when I read a line of CODE = 1 for DT = 30 - OCT - 2012, I have to check what was the price for the CODE = 1 in the most recent previous date (which is October 28, 2013). Then I will compare the two prices (for 30 Oct 28th) and fill out another table.
  
  I hope I have described the situation well.
  
  Could someone help me with this please?
  
  My actual table contains a few million lines in DEV env and a lot more in PROD.
  
  Thanks in advance!

  If you use the analytical function LAG you can 'Watch' data of previous lines...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select code, dt, price
    2        ,lag(price) over (partition by code order by dt) as prev_price
    3* from t1
  SQL> /
  
        CODE DT                        PRICE PREV_PRICE
  ---------- -------------------- ---------- ----------
           1 21-OCT-2012 00:00:00         10
           1 22-OCT-2012 00:00:00         10         10
           1 23-OCT-2012 00:00:00         12         10
           1 24-OCT-2012 00:00:00          9         12
           1 25-OCT-2012 00:00:00          8          9
           1 26-OCT-2012 00:00:00         13          8
           1 27-OCT-2012 00:00:00         11         13
           1 28-OCT-2012 00:00:00         15         11
           1 30-OCT-2012 00:00:00         13         15
           1 31-OCT-2012 00:00:00         13         13
           2 29-OCT-2012 00:00:00         15
  
  11 rows selected.
  

• How to find out based on all INDEXES, VIEWS,... a table?

  How can I find out how much and what objects dependent (index, views...) has a certain myuser444.table123 TABLE?
  
  Peter

  user559463 wrote:
  How can I find out how much and what objects dependent (index, views...) has a certain myuser444.table123 TABLE?

  Use the DBA_DEPENDENCIES and DBA_INDEXES. For example:

   select  type || ' ' || owner || '.' || name
     from  dba_dependencies
     where referenced_owner = 'SCOTT'
       and referenced_name  = 'EMP'
       and referenced_type  = 'TABLE'
  union all
   select  'INDEX ' || owner || '.' || index_name
     from  dba_indexes
     where owner = 'SCOTT'
       and table_name  = 'EMP'
  /
  
  TYPE||''||OWNER||'.'||NAME
  ----------------------------
  FUNCTION SCOTT.F1
  VIEW SCOTT.EMP_VW
  INDEX SCOTT.PK_EMP
  INDEX SCOTT.EMP_IDX1
  
  SQL> 
  

  SY.

• How to find out the max mem can be allocatedTT for 32 bit Win?

  How to find the maximum size of permanent and temporary data data size that can be allocated for the Oracle times ten for Windows 32 bit OS.

  The maximum size that can be achieved depends on three main factors:

  1 system (memory, swap file) configuration.

  2. connectivity method (direct mode compared to the server). Direct mode is more limited than client/server (but is much faster).

  3. for a DBMS direct mode, the number and type of dll that the application uses. Console mode apps can generally for example to reach a size of datatstore much larger than .NET applications.

  The maximumn size will usually be of the order of 600 MB to 1 500 MB. The only way to determine a specific value is to try it. With your application, start with a store of 1000 MB and data increase decrease until you find the breakpoint.

  In fact, 32-bit Windows is not a good platform for hosting of any significant size data warehouses. 64-bit Windows is much better (and it works almost all the 32-bit applications without any problem).

  Chris

• How to find the difference in date in years, months and days

  Hello
  I need to find the difference between 2 dates in the following way "years months days". "
  Please can help me, how can I achieve this.
  
  for example, in the scott schema emp table, I need to find the difference in date between sysdate and hiredate for an employee in the following way.
  
  12 years 7 months 4 days.

  Hello

  Please, see this post to AskTom [difference between 2 dates | http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:96012348060]. There is good information in this forum, for example you can also see this thread [calculation of years, months & days | http://forums.oracle.com/forums/thread.jspa?messageID=3115216�]

  Kind regards

  Published by: Walter Fernández on November 30, 2008 08:58 - adding another link

• How to find the number of data items in a file written with the ArryToFile function?

  I wrote a table of number in 2 groups of columns in a file using LabWindows/CVI ArrayToFile... Now, if I want to read the file with the FileToArray function so how do I know the number of items in the file. during the time of writing, I know how many elements array to write. But assume that I want the file to be read at a later time, then how to find the number of items in the file, so that I can read the exact number and present it. Thank you all

  Hello

  I start with the second question:

  bytes_read = ReadLine (file_handle, line_buffer, maximum_bytes);

  the second argument is the buffer to store the characters read, so it's an array of characters; It must be large enough to hold maximum_bytes the value NULL, if char [maximum_butes + 1]

  So, obviously the number of lines in your text tiles can be determined in a loop:

  Open the file

  lines = 0;

  While (ReadLine () > 0)

  {

  lines ++;

  }

  Close the file

• Query is running slowly (30 sec) first, then quickly - how to find out why?

  Hi all

  First of all, a warning: we are a company of rapidly growing software which provides a SaaS-like solution and is hosting an Oracle database for our own software running at client locations. I'm still not a DBA, but I've been learning for a while now and will follow appropriate courses, next year. This problem becomes urgent enough, however.

  We have an Oracle 12 c (12.1.0.1.7) running on a pretty Beefy hardware (card SSD 8 cores, 72GO,) and it works fine. One of our applications raise queries that run slowly very often, but when I run the same query through Toad, it is very fast again. Sometimes I can make the same query to be slow again by changing settings, adding values to an in(), etc., but not always. By not being is not in a position to know WHY the query is slow, I can not as a solution. We have been struggling with this problem for some time (more than a year, I think) and had the same problem when you still run Oracle 11.

  Some more bits of information that might be relevant:

  -This user defines cursor_sharing for force, per my request (the software itself does not lie)

  -J' put optimizer_index_caching at 25, because I know the DB all be in memory.

  -J' put optimizer_index_cost_adj at 50, because I saw full table scan too for my taste. The two parameters when it is while the queries were not already productive.

  -Memory: memory_target = 40 GB, db_cache_size = 5.5 GB, pga_aggregate_target = 8 GB sga_target = 30 GB

  -Optimizer_dynamic_sampling is the default, 2.

  -J' saw a few query plans have a note, something like "Explain plan was made with the statistics from previous executions. All do not have this, however.

  -J' saw some explain plans in which the actual recordings differ a large amount of the expected records, planned somethings was 1, real was 4 billion...

  -We actually had to add / * ordered * / for some queries to speed up execution. It's been a few other issues have better results (20 sec every time! to 200 ms), but worse when Oracle has finally found the execution plan (40ms).

  -Many queries seemed to start with arrays of harm to our taste.

  -A copy of the database, running locally, also had some problems with queries - the plan of the explain command took 2 seconds, the query itself only a few Ms. the same database of course does not receive any insert/update statements.

  It may be important to note that this scheme receives a lot of updates and inserts, so I thought that it could screw up the statistics?

  As I wrote, we have been struggling with this problem for a long, long time. We have made changes to hardware, the parameters of the Oracle, the client software, everywhere, but are no closer to a permanent solution. Any help would be greatly appreciated!

  Kind regards

  Jelmer

  Post edited by: optimizer_cursor_caching 1449188-> optimizer_index_caching

  1449188 wrote:

  Time for a summary:

  -We switched off forced cursor sharing. This reduces overall Oracle CPU usage a bit.

  -We removed the / + SORTED * / in queries with a theatrical performance

  -optimizer_dynamic_sampling was fixed at 11, but _optimizer_use_feedback is always enabled

  -All the tables and indexes were analyzed, I created statistics expanded on the task, address, person

  Many queries work MUCH better, another big thank you to all who have helped me so far.

  ...

  In particular the line 25 confuses me. Always this BITMAP AND even that crazy E-lines / difference A-lines. I'm sure that's the only reason for the poor performance of this query...

  I think you have a mixture of different effects here, which doesn't makes it really simple to understand exactly what is happening. To some extent this seems to be caused by the new features added in 11g and 12 c.

  1. looking at the trace of the files provided above, there seems to be some problem with dynamic sampling overload (DS). This seems to be one of the reasons why you have this "first slow exec", the second fast exec, in this case without a change of regime. In this trace file, it takes 5 seconds or more to run all these queries recursive dynamic sampling as part of the generation of the plan, and there are two DS queries that contribute significantly to that time (more than 3 seconds for these two DS queries).

  In order to have OPTIMIZER_DYNAMIC_SAMPLING 11 value causes these additional queries. The advantage of this setting is that you get good enough (join) estimates. Of course, it is difficult to judge how much you make this setting and how you lose the overhead of generating plan. New DS queries make use of the RESULT_CACHE have, in principle, reassessment of the same DS queries should come from the RESULT_CACHE. However, if your RESULT_CACHE is too small to contain all of the query results (although these result sets is usually very small) you can sometimes get slowdowns in generational terms if these queries need to be run instead of pull results from the cache.

  2. the function of vibration of statistics of course is involved and sometimes leads to a re-optimizing. Once again, this could then lead to the problem mentioned in point 1., if DS requests takes a long time to generate the plan.

  So these two functions together could lead to some difficult to predict behavior (slow first => possibly caused by DS, second time slow => caused by Feedback: statistics, leading again to DS, third etc. quick time.). It may also explain why you see 'first exec' slow, second fast exec, if re-optimizing na not take too much time and lead to a better execution plan.

  3. the special regard that seems to be the wide track as part of an internal source of lines join nested loop - and in this case, the estimates are * iterative *, so be careful when comparing E-lines (iteratively) with A-lines (cumulative across all iterations). The index used functionality combine to combine two indexes TASK_IDX1 and TASK_IDX2 suggest that it would be beneficial to add PERSON_ID to TASK_IDX1 and maybe get rid of TASK_IDX2 - but it might be appropriate to other queries, which I can't really judge. You can then check if adding more attributes to TASK_IDX1 it would make even more selective about the level of the index, as most of the lines for this particular query is filtered on the WORK table, so adding TASK level. FIXED, TASK. CLOSED and/or TASK. PLAN_START / PLAN_END it would make an even more effective operation. But adding PERSON_ID should solve this particular problem.

  4. the 'quick' this query (mentioned somewhere at the beginning) variation has no merge view inline (SELECT HELP... GROUP BY...), then you can try this by adding a NO_MERGE hint to the inline query (SELECT / * + NO_MERGE * / AID...), just to see if that gives you several times the plan 'rapid '. I still think that the index change described might be the best choice.

  5 SQL Directives of the Plan have been mentioned a couple of times, and I think that it is not quite clear to you what they are. They are not "advice", but are a new feature added to 12 c where Oracle persists some information on bad estimates and then evaluates these SQL Plan plan generation for dynamic additional sample queries and the production of statistics to create additional guidance extended statistics. I don't have enough experience with this new feature and therefore cannot judge how they play a role here. You can ask DBA_SQL_PLAN_DIR_OBJECTS and DBA_SQL_PLAN_DIRECTIVES to see if there are tickets for your particular objects in question.

  Randolf