How to fix Windows 7 stalls/gel/white screen / crashes?
I tested a solution for months now on Windows 7 with random freeze/stall/white screen/hang...what never terminology applies to nothing does not.
I read almost all of the blogs, and I so far did not come to the top with a response date of 12/04/12.
I wish Microsoft admit to this problem and fix it.
Symptoms:
* On a new installation, Windows will stop random work except the mouse.
* This appears in time of 5 seconds, until a maximum of 30 seconds, then back on.
* This behavior re - stops with the frequency of all the 6 minutes to 30 minutes in time.
* If repeated receive mouse clicks, the screen turns white with the rotation of the cursor (gesture of work).
* At the end, the operating system returns to normal.
* Has been observed by me on almost all Windows 7 machines once either.
I'll save read here about what I tried to do. I just need someone to see this post to tell me or link me a solution to this; What seems to me a problem forever with the Windows 7 operating system.
Robert Reinman
Shop supervisor/computer/tool of Support & tool and die maker for 39 years.
Hi Robert,.
I suggest you try the steps from the following link:
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286
Note: When you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.
Tags: Windows
Similar Questions
-
HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.
HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed
Hi João,.
To help solve the problem, remove the PC from the domain and then connect the computer to the domain.
Click the Microsoft KB Article below for troubleshooting steps.
The trust relationship between this workstation and the primary domain failed
Let us know how it goes.
Thank you
-
How to fix windows photo viewer showing the class not regitered error in the local system.
Dear all,
Please provide me the solution.
How to fix windows photo viewer showing the class not regitered error in the local system.
Thank you best regards &,.
Amol.
Hello Amol,
Were there any changes made on the computer before the show?
The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:
http://www.Java.com/en/download/help/download_options.XML
http://www.Java.com/en/download/index.jsp
Let us know the results.
-
How to fix windows script error c:\program files\safeboot\AutoDomain.vbs
Whenever I start my laptop, this error appears twice. I have to click OK twice before starting Windows. What caused this and how would approach I solve this?
This error appears twice when starting my laptop. What causes this and how to fix it?
Thank you in advance!
Sharon
Hello Sharon,
1. have you done any hardware changes or software on your computer before this problem?
2. your computer with any domain or server is?
If you have McAfee installed, you can uninstall McAfee. If the problem persists, reinstall then it & check:
Hope the helps of information.
-
How can I get rid of a white screen is displayed for 3 seconds at startup
Since my last update of Thunderbird to 31.3 I get a white screen for 3 seconds when starting and until I see my files.
I use Thunderbird to access Yahoo.co.uk and 2 accounts Outlook.com .
All plugins are disabled.
I have an extension, CompactHeader 2.0.9, which I removed, but the problem remains. I have now reinstalled.
I uninstalled and reinstalled Thunderbird - problem just the same.
If I boot in safe mode, there is no white screen, it normally loads directly to folders.
I don't know what to try next any suggestions are welcome.
See you soonOK - I tried to disable addons and themes, I've also uninstalled and reinstalled without addons or themes.
However - Thunderbird just did an update and the problem seems to be resolved!
-
How to fix windows vista update when get massege 80070005 error code
by updating windows, I'm me massege error code 80070005
How isolve this problen
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Run the Microsoft fixit for the link.
http://support.Microsoft.com/mats/windows_update/
Method 2:
Follow the steps in the link.
-
How to fix Windows update error 80072efe or 80072f76
I need help to download properly update 8007371B.
I am running Windows Home Premium 64 Bit
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
-
How to fix \windows\system32\confjg\system
what computer turning on a note comes up saying: Windows didn't start because the following file is missing or damaged:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
How to do a repair installation to repair Windows 7
This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
http://www.SevenForums.com/tutorials/3413-repair-install.htmlNo-reformatting of Win7, non-destructive reinstall
http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/Note: create if possible a Backup of the Image before you start Windows.
This is your backup in case something goes wrong.
After you have repaired your PC and then create a new backup 'Last known good configuration' Windows.EaseUS Todo Backup Home V8.6 http://www.todo-backup.com/home/home-backup.htm
Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
Supports version 8.6 XP, Vista, Windows 7, Windows 8 / 8.1 and Windows 10J W Stuart: http://www.pagestart.com
-
How to fix Windows update configured to never install drivers
None of my USB sticks work, says no driver installed. Troubleshooting report says "windows update configured in a way to never install drivers". How can I fix?
Hi Phil,
Thank you for your update on the issue.
- Have you tried to connect your USB stick with all the USB ports on your system?
- You are able to install all Windows updates.
As you have tried to choose the option always to install the best driver from Windows Update software already, I suggest once, click the radio button for Yes, this automatically (recommended), save changes and check if the problem persists.
Also, I suggest you try to remove and reinstall all USB controllers and check with the question.
- Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of the categories of equipment, locate and expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and let the USB controllers get reinstalled.
- Plug in the removable USB device and test to make sure that the problem is solved.
More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly
Please post back your results for assistance.
-
How to fix Windows Media Player as he cut about 5 seconds before the end of each song?
Original title: Windows Media Player turns off about 5 seconds before the end of each piece. Should I uninstall and reinstall the drive to fix?
Windows media player cuts and in about 5 seconds before the end of each song played: How can I fix. The problem is definitely with WMP, it does not work with other players on my PC.
Hello mckendrick,.
Sorry for all the questions that you are experiencing with Windows Media Player.
I have included a link here to a convenience store for Windows Media Player. It can help to identify potential problems with codecs.I hope this can help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Satellite A-C55-1N1 - how to fix Windows 8.1 after trying Linux?
Hello
Laptop: Satellite C55-A-1N1
In my infinite wisdom, I tried to install Linux in dual boot as my old laptop scenario. I have narrowed the main partition of windows in windows 8.1 first and then installed linux on this partition. After the reboot, Linux worked, but not windows, because I had to disable the secure boot and set bios to the CSM for linux to load.
After turning on and bios secure boot to EFI, windows boot more. I tried to repair the windows operating system by running the repair of another DVD of Win8.1 tools, but they do not have repair startup. I learned eventually to zero to start takes you to the... except hidden restore partition my not!
So, I checked the windows and the recovery partitions are intact but I can't access the recovery partition or repair the windows installation with windows 8.1 repair tools. No, I have not all backups, other images or system restore options. Clever, aren't I? I don't have the original recovery partition (which I can't access) and the windows partition to play with. I don't want to lose my license OEM Windows 8.1...
Any ideas how to save this installation of windows?
Thanks in advance for any help.
You have made the same mistake as many other people. On this forum, we discussed many times how it works and tried to explain how it works.
In s manuals are described clearly that each owner of the laptop must create a recovery (DVD or USB) media and this created recovery media can be used for recovery image installation where this HARD drive recovery option does not work or if the HARD drive is faulty and should be replaced.
As I see that you do not have this recovery media. Is that HARD drive recovery facility can be started if laptop has only factory settings. Your experience of Linux, this option disappeared and there is no way to start it again.
What can you do now? I know it may seem stupid now, but if you want to install original recovery image you need to order new media of recovery and it can be done on https://backupmedia.toshiba.eu/landing.aspx
-
I've just recovered from the error that says "Windows\system32\config/system is damaged or missing" in inserting my XP installation disk and choosing to install a Windows fresh on drive D rather than c. drive C already Windows out there (my bad Windows) and I didn't want to not crush him because of all my drivers and programs, etc.
How can I repair my installation on drive C?
Thank you
LewisliteHello
Try to get Microsoft WXP CD (no recovery media) facilities and use the repair option. You may repair already preinstalled WXP Basel. If you have more question about the Windows repair option please write again.
-
Re: How to fix Windows components?
How to repair the individual Windows components without format & reinstall the entire operating system?
Here the operating system is Vista
Hello!
I think you should give us a little more details like your laptop model.
And you should say what you mean exactly.
It is not clear from what you have posted.Look in the control panel and Add/Remove programs. You change the Windows components and remove the software.
Good bye
-
How to fix Windows Update error code: 80070424
Tried to install "Microsoft Fix It" but PowerShell installation failed. Windows Vista Edition using Home Premium 64-bit. I am currently totally impossible to install updates and it becomes really frustrating. I cant even install the printer due to the system drivers is not not to date.
Hi Kyle,.
You have made any changes to your computer recently?
I suggest you to follow the steps in the link and then check if it helps.
Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updatesI hope this helps.
Maybe you are looking for
-
What happened to Browser.tabs.loadonNewTab?
When I open a new tab (with ctrl-t) I want to open it on my homepage. There used to be a parameter, Browser.tabs.loadonNewTab, with which I could configure this behavior. It seems to have disappeared. I don't see anything likely in Browser.tabs. Has
-
Hi all, I just installed my new router WiFi R7000 and I feel some strange problems. My WiFi configuration consists of two WiFi networks, one on the 2.4 GHz frequency and the other on the frequency of 5 GHz. I have connected my two smartphones success
-
Check French option comes out only Outlook Express
Like others, I have spell check the problem of language selection with OE, version 6.0.2900.5512, of not being able to move from the French to the English. My OS is XP SP3 and I have Office Home & Student 2007 is installed. None of the suggested cor
-
Hello all, I had this problem with my folder names on my rocket with random letters and numbers at the beginning of my files. Example: 0B030000_Folder name How would I go about to fix? Also note, this is visible on the "rocket" itself. If I connect i
-
I have a HP Deskjet F4580 3 years, worked to change the router.
I have a HP Deskjet F4580 3 years, worked well to change my router yesterday. Since then the blue wireless button flashes just power and I can't "add device" on the new network. All thoughts