How to force refresh them data

Similar Questions

• OIM 11 g approval - how to force reject them a request

  Dear all,
  
  I did an approval workflow simple (according to oracle documentation) with 2 level of the participant of the applicant -> Manager -> owner.
  
  The problem is when Manager of dismiss the application, approval still continue to the owner.
  
  How to force dismiss them the application, when one of the approvers reject the request?
  
  Kind regards
  Heri

  While developing the approval workflow, there is a checkbox in ApprovalTask.tak in JDeveloper.

  You see an option in the tab of the assignment:

  task from start to the last participant

  The change, and then select "* your task when the Member chooses: REJECTION."

  Deploy your composite again and test

• How to force refresh rate in OSX?

  Hi my friends.

  I have a problem (for me) with a resolution and framerate in MacMini with El Capitan and my home theater.

  I'll try to explain well because my English it s UH very poor

  Well, yesterday was this entertainment: TV 42 "philips, Pioneer VSX - 520-k A / V and last MacMini version (base end of 2014). MacMini show in TV using the HDMI AV Pioneer link. (MacMini--> Pioneer--> TV). This config use 10920x1080p 60 Hz and see everything ok.

  This morning I bought new Samsung JU7500 TV 55 "4 k - UHD replacament TV Philips TV. The problem of it s with new TV:

  -If I connect MacMini HDMI direct to the TV, see OSX config say

  -If I connect MacMini to A / V, s Billboard in black... Connect only by 'share display' or VNC.

  -If I connect MacMini to A / V but with TV off the coast and their TV display, Panel it s ok...

  After several tests, I found this failure:

  The problem is that...

  1 - If connect MacMini using A / V, refresh rate it s 30 Hz and has / V Don t support this rate (so the screen is black but sounds it s ok with AV, only a black screen it s) (see VNC capture). But nevertheless this same config live TV HDMI TV turns on screen

  

  2 - If power on MacMini and connect to AV but turn off the TV, display config has 50/60 Hz and disappears 4 k resolutions.

  

  3 - the last time, with steep 2, config 1920 x 1080 60 Hz for example and turn them on TV (don't forget the MacMini using AV) display see the config and turn on the TV on! (only display is black if I touch any resolution because that change again 30 Hz).

  

  I think the problem is that MacMini use 30 Hz and AV Pioneer Don t support this rate so my question is: How can I force the refresh rate is 60 Hz forever?

  I hope you understand me

  Finally used this soft, it s very fine it s to pay but good app

  

• How to force separating them Motorola device ID

  Hello!

  Last week I had to replace my wife MotoGP, unfortunately I did not know that one must separate the phone with Device Motorola before wiping it!

  Now a "My Stuff" page there are two MotoG connected, I could make primary current on the other hand, the "delete" button shows just the message "unlink your device Motorola ID of your device to remove.

  We started a conversation with the support of Motorola and after a while, I let the operator which include:

  1. We do not have more physical access from the old phone
  2. the old phone wiped 2 times before referred to Amazon

  Finally the OP has understood and wrote "I will escalate this case to our team and they will answer you on this concern. Our team will get back to you with in 24-48 hours."

  It was last Friday... I can wait 2 days more before contacting them again (I have a PDF of the cat print), but in the meantime I ask here just to be sure that it really is not quick way to force a phone to the Motorola account withdrawal...

  Thank you and ciao!

  Post your concern in "feedback forum" it's the best bet to get a fix for this problem.

• How to force back them to sleep?

  Hi all

  I have a database of Eve to the location of the log archive = / home/ARCH_PROD

  I list the contents of that folder, and I see that the required archiving logs exist.

  [oraprod@uatdb ~] $ cd/home/ARCH_PROD

  [oraprod@uatdb ARCH_PROD] $ ls-l

  Total 13866072

  -rw - r-. 1 oraprod s/n 939280896 12 January 00:47 1_301_898613761.dbf

  -rw - r-. 1 oraprod s/n 943042048 12 January 00:48 1_302_898613761.dbf

  -rw - r-. 1 oraprod s/n 962301952 12 January 00:47 1_303_898613761.dbf

  -rw - r-. 1 oraprod s/n 965938176 12 January 00:48 1_304_898613761.dbf

  -rw - r-. 1 oraprod s/n 965082624 12 January 00:48 1_305_898613761.dbf

  -rw - r-. 1 oraprod s/n 953583104 12 January 00:49 1_306_898613761.dbf

  -rw - r-. 1 oraprod s/n 950122496 12 January 00:49 1_307_898613761.dbf

  -rw - r-. 1 oraprod s/n 968144384 12 January 00:49 1_308_898613761.dbf

  -rw - r-. 1 oraprod s/n 954226176 12 January 00:50 1_309_898613761.dbf

  -rw - r-. 1 oraprod s/n 953012736 12 January 00:51 1_310_898613761.dbf

  -rw - r-. 1 oraprod s/n 955270656 12 January 00:52 1_311_898613761.dbf

  -rw - r-. 1 oraprod s/n 947273216 12 January 00:50 1_312_898613761.dbf

  -rw - r-. 1 oraprod s/n 766828544 12 January 00:52 1_313_898613761.dbf

  -rw - r-. 1 oraprod s/n 940087296 12 January 00:53 1_314_898613761.dbf

  -rw - r-. 1 oraprod s/n 947610112 12 January 00:55 1_315_898613761.dbf

  -rw - r-. 1 oraprod s/n 86966272 12 January 00:55 1_316_898613761.dbf

  Then I started the recovery:

  SQL > startup nomount;

  ORACLE instance started.

  Total System Global Area 2137886720 bytes

  Bytes of size 2254952 fixed

  486541208 variable size bytes

  1627389952 of database buffers bytes

  Redo buffers 21700608 bytes

  SQL > ALTER DATABASE MOUNT STANDBY DATABASE;

  Database altered.

  SQL > RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM the SESSION.

  Complete media recovery.

  SQL > archive logs list;

  Database log mode Archive Mode

  Active AutoArchive

  Archive destination/home/ARCH_PROD

  More old sequence of journal on line 300

  Log sequence to archive 0

  Current log sequence 301

  SQL >

  I repeated announces the newspaper, but it is always out of 301

  I check the LOG of ALERTS:

  ==================

  Arc0: Started archiving

  ARCH: FROM PROCESS ARCH COMPLETE

  ARC0: FROM PROCESS ARCH

  Thu Jan 12 01:18:55 2016

  Mount of redo thread 1, with mount id 312712314

  Physical Standby Database mounted.

  Disabled lost write protect

  Thu Jan 12 01:18:55 2016

  Arc1 started with pid = 19, OS id = 18651

  Thu Jan 12 01:18:55 2016

  ARC2 started with pid = 20, OS id = 18653

  Thu Jan 12 01:18:55 2016

  ARC3 started with pid = 21, OS id = 18655

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  ARC2: Become the heartbeat ARCH

  ARC2: Become the active heartbeat ARCH

  Completed: ALTER DATABASE MOUNT STANDBY BASE

  ARC3: Started archiving

  ARC0: FROM PROCESS ARCH COMPLETE

  Thu Jan 12 01:19:03 2016

  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION

  Try to start inside the managed Standby recovery process (PROD)

  Thu Jan 12 01:19:03 2016

  MRP0 started with pid = 22, OS id = 18663

  MRP0: Background process Managed Standby recovery began (PROD)

  has started the process of logmerger

  Thu Jan 12 01:19:08 2016

  Managed Standby recovery not using real time applies

  Parallel Media Recovery started with 12 slaves

  Waiting for all non-current archive ORLs...

  All non-current ORLs have been archived.

  Media, recovery waiting for thread 1 sequence 301

  Completed: ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT the SESSION

  Help, please...

  Thank you very much

  JC

  Ask yourself why logs archived is not applied to the managed node recovery ensures database? If so, please see (Doc ID 166689.1).

  Thank you

  Hussein

• How to force refresh user OAM changes without having to restart the server?

  Hi people,
  
  I have an OAM authorization rule based on the ldap user attribute (it is url for ldap query under 'Allow access', rule, that is ldap: / /... with a Cache update is enabled) with the hardcoded value, so that only users with these attributes can access protected resources. My problem is that if I add/remove the attribute via the User Manager console, it does not take effect until I have actually restart the access server. I can, however, locking/unlocking the account of the user through Manager users with immediate effect.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  There is no problem to run OAM identity and access servers on the same machine, with some ports you choose. I suspect that the problem is that AccessGate the identity of the server is (incorrectly) set up to talk to port 6021 - If Yes, this will be reflected in the identity\AccessServerSDK\oblix\lib\ObAccessClient.xml file and can be corrected by running the configureAccessGate command. There are additional steps to get the automatic hunting at work (in addition to the definition of the parameter doAcessServerFlush) - did you follow the documentation for these?

  Kind regards
  Colin

• When I view my Photos, they have a place and a date. How can I print them with that on them?

  When I view my Photos, they have a place and a date. How can I print them with that on them?

  You want to print the information on the image itself?  To do this, you will need to export the picture on the desk and edit it with a 3rd party image editor that supports the text and layers:

  Some Image editors that support layers and text:

  
  

  Photoshop Elements for Mac 11 - $79

  GraphicConverter - $40
  The Rainbow painter - $30

  Photos of affinity- $50

  FX Photo Studio - $30

  Inpaint - $20
  Imaging - $38
  Acorn - $50

  Pixelmator - $60

  Seashore - free

  GIMP for Mac - free (Yosemite & Mavericks only)

  

• How we can refresh a page if a date is entered in a date picker

  Hello
  
  How we can refresh a page, if a date is entered in a date picker, as the selection with option mailing list where the page
  
  is automatically updated.
  
  TJ

  TJ,

  Use the Onchange event to call a function doSubmit javascript to refresh the page. Change the date picker control element and the attributes of the element in HTML Form code
  onChange = "doSubmit (); »

  Thank you
  Manish

• I added Wikipedia and Wikivoyage to my search engine and the icons are not there. How can I add them?

  In the search in the top right of my browser, I recently added Wikipedia and Wikivoyage as options, but the icons are not there. Instead, I have a blank white page instead of the icons. How can I fill them in?

  This also happens on my laptop which is a Macbook Air, so it's not limited to the Windows 7 version of Firefox.

  When there is no data icon in the XML file, then Firefox will be able to display such an icon.

  Try adding on Mycroft Project website search engines.

  • http://mycroftproject.com/search-engines.html

• I compressed my photos for e-mail. Then when I resized them they were blurred. How can I delete them again?

  I compressed my photos to download to send to someone. I have compresses them for email (which is the smallest of the compression.

  They said that the pictures were small.  I tried to unzip it but could not.  Then I tried to resize and send to them.

  They said the size was ok, but now the pictures were too blurry.  How can I get them back to clear?

  I compressed my photos to download to send to someone. I have compresses them for email (which is the smallest of the compression.

  They said that the pictures were small.  I tried to unzip it but could not.  Then I tried to resize and send to them.

  They said the size was ok, but now the pictures were too blurry.  How can I get them back to clear?

  ===========================================
  DavidMCandy is correct... the data is missing.

  Looks like you were using Microsoft Office Picture Manager...

  When you go to edit pictures and choose to compress the images.
  E-mail messages... it reduces the dimensions of the picture in pixels
  to fit in a window of 160 x 160 (it's barely a size of thumbnails)

  Then, when you close the Manager of photo... it displays a dialog box
  who says:

  There are changes that have not been registered
  Save not save cancel

  If you choose... Save... pictures will be compressed and photo
  Farm Manager.  This action overrides (replaces) the original
  (uncompressed) versions of the photos and the recovery is not a
  option.

  To prevent this from happening in the future... create renamed
  copies of the photos 'before' compression and only compresses
  copies of famous.

  ===

  As an alternative, you may like the following free resizer:

  Prish Image Resizer - PowerToy for Windows XP, Vista, 7, 8
  http://www.photo-freeware.NET/Prish-image-resizer.php

  Prish Image Resizer tutorial)
  http://www.Winhelponline.com/blog/Prish-image-resizer-PowerToy-Windows-XP-Vista/

• How do force you a T410 to recognize wifi networks?

  How do force you a T410 to recognize wifi networks?

  I have a t410 that my company has released me.  Works fine at the office on a wired network.  But I can't take anywhere and use wifi.  The only network he displays when you click the network icon in the status bar is Verizon Wireless (which is not the same configuration in our laptops).

  When you click on network and sharing Center, and then manage wireless networks, all networks wifi, I need to use are here.  But it won't recognize them.  They are all configured properly.

  BTW, with my Macbook Air adjacent to the T410 and connects to my wifi network instantly.  Network plug from your cell phone, both are set up the same.

  Our it guy says I should remove and reconfigure each network.  It does not help.

  Any suggestions?

  After the validation I continued searching this forum for an answer to my problem.  I found an old post on the t410 turn off random wireless connectivity.  It does this without any notice.  The hotfix that is described in this post is not applicable to the version (current?) of Thinkvantage on my new Lenovo.

  Here's the message I think solved the problem:

  -----------------------------------------------------------------------------------------------

• Someone removed all my sheets spread out of my office, but they are not in the trash. How can I find them?

  someone removed all my sheets spread out of my office. They are not in the trash. How can I find them?

  Original title: help with spreed removed leaves

  If you have no backups so it is the perfect time to remember this rule of iron: YOU SHOULD BACK UP YOUR IMPORTANT FILES REGULARLY! In addition, you must keep your average backup away from your PC for most of the time.

  "In your case you * could" be able to retrieve your documents as follows:

  1. Open Windows Explorer.
  2. Navigate to the c:\Users\Gail folder.
  3. Right click on the folder "Desktop".
  4. Click the line "restore previous versions."
  5. Select an appropriate date.

• Most of the icons on my desktop have changed to the music/photo icon. How can I change them back to the correct icon?

  Most of the icons on my desktop have changed to the music/photo icon. How can I change them back to the correct icon?

  Another method is to do a system restore.

  If you remember a time when you did NOT have this problem, and if this date is not too long, use this date or before as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• How to convert a xs: date for XS: DateTime

  In my application, there are the following 2 cases, I need to manage:

  1. I have a "XS: date" and I need to convert it in "XS: DateTime".
  2. I have a "XS: date" and a "XS: Time" and I need to combine in ' XS: DateTime.

  Following the answer to this question on Stackoverflow, I tried both " xs:dateTime($date) "and" fn:dateTime($date, $time) " but none of them worked.

  When I used " xs:dateTime($date) " to manage the 1st case, I got the following exception during the OSB has reached the stage of conversion for the date:

  OSB Replace action failed updating variable "body": Error parsing XML: {err}XP0021: "2014-12-09": can not cast to {http://www.w3.org/2001/XMLSchema}dateTime: error: date: Invalid date value: wrong type: 2014-12-09
  

  When I used " fn:dateTime($date, $time) ", the transformation is not yet accepted by the IDE. " It displays the following error:

  line 113, column 42: "{http://www.w3.org/2004/07/xpath-functions}dateTime" unknown function (or number of arguments (2) is wrong
   
  

  For now, as a solution, I use 'concat' to combine the date and time fields in the 2nd case and add 'T00:00:00' to handle case 1, but I think that this is not a good approach.

  I would be very grateful if you could show me how I can correctly convert date in dateTime format fields.

  For the moment, I use OSB 11 g with the last v11.1.1.7.4 grouped patch applied.

  Found in the documentation that, in fact, only the working paper 2004-07 is implemented in this version:

  https://docs.Oracle.com/CD/E28280_01/admin.1111/e15867/XQuery.htm#OSBAG444

  According to the specifications, the casting of XS: date for XS: DateTime should work:

  XQuery 1.0 and XPath 2.0 functions and operators

  But as I mentioned previously, it is perhaps that you do not pass the correct data type.

  If the data are not based on a schema, then sch:jdOriginalPromisedDeliveryDate will be considered from type xdt: untypedAtomic and cannot be cast in all except XS: String.

  Is - it works better:

  {xs: date ($jdOriginalPromisedDeliveryDate) cast as xs: DateTime}

  ?

• I created a few exit in Speedgrade presets that are no longer useful. How can I remove them?

  I created a few exit in Speedgrade presets that are no longer useful. How can I remove them?

  I'm on a PC Win7, SpeedGrade CC 2014.2... which is technically a 8.x version. So my output self made presets are... ready? ...

  C:\Users\Neil\AppData\Roaming\Adobe\SpeedGrade\8.0\Settings\Output

  If you are on a Mac, there is a place that looks like where are stored the data preferably & user.

  Neil