How to force the sansa to refresh the database

Similar Questions

• I know how to force the Spotlight for re - index a drive or a folder. But how then do I mail?

  I know how to force the Spotlight for re - index a drive or a folder.

  But how then do I mail? I drag this file to the window?

  Thank you.

  Try re-indexing of mailboxes mailbox. This can take some time if you have a lot of mail.

  Reindex messages           For El Capitan, try looking in V3.

  Reindex messages (2)        See post by Linc Davis

• How to force the old games in a window instead of full screen__

  How to force the old games in a window instead of full screen
  to lighten my load of vid card and switch between windows without minimize
  This is for vista

  Some games have a function of window mode and others are not.

  as:

  If you put at the end of the section 'target' shortcut in the Sims 2, the command w as follows:

  | "X:\programs\games\sims 2\bin\Sims2.exe" w |

  The Sims 2 will run in windowed mode those that run you it!

  but not all games have the option!

  then go to Google and look for some info there ;)

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to start the database and servers after the installation of the Webcenter JSK Portal

  Hello

  I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

  Any help will be great!

  Best regards!

  Thanks Françoise-Oracle for your response

  As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

  Best regards!

• How to display the database column value in a component of choice selected?

  Hello everyone;

  I use Jdeveloper 11.1.1.4 and right now I have the .jspx UI page that includes < af:selectonechoice / > components and according to the requirment I have to fill one of the column in the table in this drop-down list.

  can someone tell me how to fill the database column value in this drop-down list. I know I need to create the VO for the same thing, but I'm new to this technology. Then please suggest.

  Thanks in advance.,

  This will help u

  https://blogs.Oracle.com/prajkumar/entry/create_lov_in_adf_application

  How to create LOV in ADF 11 g | Techartifact

  Oracle Fusion Middleware Technologies: 11G: how to create a list of Values (LOV)?

  http://www.baigzeeshan.com/2010/03/creating-lov-in-ADF-application.html

  http://husaindalal.blogspot.de/2010/05/How-to-default-lov-with-its-first-value.html

• How to check the database is created in the database of node 2 RAC

  Hi all
  
  Please allow questions maybe too obvious. I'm not familiar with RAC and ASM.
  virtual box (Windows 7)
  
  2 built nodes on Linux 6.1 Windows 64-bit virtual machine.
  11.2.0.3 software grid & database.
  One of DB name is demo
  Node1 (demo1)
  Node2 (demo2)
  
  
  1. I installed the 11.2.0.3 grid software and set up ASM with her. The installation seems to succeed.
  
  I am able to use view state using crsctl (see the log)
  
  2. I installed the database software and you want to create a database (demo) by default. the software from 95%, but not able to realized the dbca.
  
  I see that the asm_pmon is running, but not able to see the process of demo db. I think at this point, I don't have my demo of database has been created yet.
  
  Yes, question
  1: is the database created?
  2. I try to use dbca to create my demo db, but at the stage of creation of the 'copy of the database files' - she complaint ORA-03114: not connected to ORACLE
  ???? What? What oracle server trying to connect?
  3. If the database is created, how to start the database, in particular it has 2 instances (demo1 and demo2)?
  
  Please advise!
  
  Thank you very much!
  
  
  
  
  [grid@demo1 ~] $ crsctl stat res t
  --------------------------------------------------------------------------------
  TARGET STATE SERVER STATE_DETAILS NAME
  --------------------------------------------------------------------------------
  Local resources
  --------------------------------------------------------------------------------
  ORA. DATA.dg
  Demo1 ONLINE
  Demo2 online
  ORA. LISTENER.lsnr
  Demo1 ONLINE
  Demo2 online
  ORA.asm
  Demo1 Started online
  Demo2 Started ONLINE
  ORA. GSD
  In offline mode offline demo1
  Demo2 offline offline
  ORA.net1.Network
  Demo1 ONLINE
  Demo2 online
  ORA.ons
  Demo1 ONLINE
  Demo2 online
  --------------------------------------------------------------------------------
  Cluster resources
  --------------------------------------------------------------------------------
  ORA. LISTENER_SCAN1. LSNR
  1 demo1 ONLINE
  ORA.demo1.VIP
  1 demo1 ONLINE
  ORA.demo2.VIP
  1 demo2 online
  ORA. CVU
  1 demo1 ONLINE
  ORA. OC4J
  1 demo1 ONLINE
  ORA.scan1.VIP
  1 demo1 ONLINE
  
  Published by: 969880 on November 13, 2012 14:18

  1. What is sure, is that your database is not registered in OCR because there are missing elements in crsctl stat res t exit for database instances.
  2. default DBCA trying to restore an RMAN backup to create a database. DBCA probably also try to connect to the new instance of the database to run scripts.
  3. you must use:

  srvctl start database -d demo
  

  This should start all database instances.

  But first try to check the DBCA logs that should be under $ORACLE_HOME/cfgtoollogs/dbca and to correct related errors.

• How to know the database uses pfile or spfile?

  Hi guru
  
  How to know the database uses pfile or spfile?
  
  
  
  Thank you

  Thank you for this question of doc!
  Please type in sql * show spfile parameter.
  If it is empty, you do not use a spfile.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• How to recover the database when archive some of the log file are deleted.

  I am facing a problem with the Oracle database, which is linked to archivelogs.
  Our development database is running in archivelog mode, but we don't have safeguards and have no recovery catalog.
  When the database was in running, disk got full, so some archivelogs were deleted manually.
  After that they have restarted the DB, and DB now not come. The errors are as follows:
  
  -------------------------------------------------------------------------------------------------------------
  
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 1444383504 bytes
  Bytes of size 731920 fixed
  486539264 variable size bytes
  956301312 of database buffers bytes
  Redo buffers 811008 bytes
  Mounted database.
  ORA-01589: must use RESETLOGS or NORESETLOGS option of database open
  
  
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  
  
  SQL > recover datafile ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  ORA-00283: cool cancelled due to errors
  ORA-01610: recovery using BACKUP CONTROLFILE option must be
  
  
  SQL > restore database using backup controlfile;
  ORA-00279: change 215548705 generated at 2008-09-02 17:06:10 needed for thread
  1
  ORA-00289: suggestion:
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00280: change 215548705 thread 1 is in sequence #1107
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00308: cannot open archived log
  ' / export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
  ORA-27037: unable to get file status
  SVR4 error: 2: no such file or directory
  Additional information: 3
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL >
  
  -------------------------------------------------------------------------------------------------------------
  
  
  1 how to recover the database and put online
  
  Any help will be much appreciated.
  
  Regarding
  Hemant Joshi
  
  Published by: hem_Kec on 7 Sep 2008 09:07

  Hello

  It is actually quite easy.
  We knew that Oracle was looking for logsequence 1107. There is no archived log, it was deleted, or it has never generated. As you delete files, the 1st solution would be possible, BUT as there was only an instance crash so more old archived logs is not required for crash recovery. There is a need during the restoration of the old backup files, which is not our case.

  Thus, the missing log sequence has not been archived = > it is a redo log.
  To identify the required online redo log, we just to log query v$ as I suggest.

  Once the log identified file, we can recover it by specifying the redo log when you ask logsequence 1107.

  And it is on. We win! :)

• [CS3 JS] How to force the update of XMP metadata for a thumbnail?

  Hi people,

  In a JavaScript in Bridge CS3, I update a value in the XMP metadata for a thumbnail. Later in the script I want to read the updated metadata XMP of miniature, but often the bridge didn't updated metadata at the time wherever I read it. In other words, my script reads the value before the update. I guess there is a problem of ongoing caching.

  I'm new to the bridge of script, and I hope someone here can offer suggestions on how I can (or even * if * I can) force the bridge to update the cache of the XMP metadata to a file so that when I read it later in the script reflect the recent changes. I tried to use Thumbnail.refresh (), but this does not seem to do the trick. I don't mind a slow script, I just want to be able to read the correct value.

  Thanks in advance for any help!

  -Jim

  Where is the line?

  Thumb.Metadata = new Metadata (updatedPacket);

  Try

  app.synchronousMode = true;

  Thumb.Metadata = new Metadata (updatedPacket);

  approx. synchronousMode = false;

  Metadata default bridge updates arrive in the background and not on the main thread, but using the mode synchronous here your script only continues to the next line, until the operation is complete.

  -David

• How to force the screen sharing to use Ethernet 2 port?

  Hello

  I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

  When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

  Is there a way to force the screen sharing to use Port Ethernet 2?

  It would be useful:

  NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v

• Satellite C55 - how to force the games to use gforce GPU?

  Hello

  It seems that I have 2 graphics cards on my Satellite C55: a 4000 Intel and a gforce 740 m. I tried to force the games to use the gforce on Panel nvidia configuration, but in the games settings (for example in the Hardware tab of flight simulator 2004), shows only the Intel.

  No idea how to resolve this?

  Thank you

  > it seems that I have 2 graphics cards on my Satellite C55: a 4000 Intel and a gforce 740 m.

  The Intel GPU is part of the Intel
  The nVidia GeForce is the external graphics card and it can be used for the application of strong performance as games

  Check these youtube videos how to do this:
  https://www.YouTube.com/watch?v=WVBEPhE_Osg
  https://www.YouTube.com/watch?v=Zh4HCadTY_A

  You can assign any application to use the dedicated made Intel or nVidia GPU card.
  This can be done in the nvidia Control Panel.

  1. click on start and then Control Panel. Select Classic view in the left side of the window.
  2. double-click on the NVIDIA Control Panel.
  3. click view, and then add the "Run with graphic processor" Option to the context Menu. Close the NVIDIA Control Panel.
  4. right click on the title of the application and select run with GPU. Then, click on NVIDIA processor high performance.

• How to force the Win7 to see the printer wireless

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  teriel9 wrote:
  

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  I don't see 802.11 a/b/g/n wireless as a capacity of connectivity for each model (6310 and 6310xi) of your printer. It is most likely the reason why your laptop is not 'see' it.

  There is a bluetooth wireless connectivity. It's a different way of connection that allows only printing capacity.

  You give more than the number of series in your laptop so I have no idea if bluetooth wireless is installed as a standard option. If it is not installed, you must buy a bluetooth dongle to wWalMart and set it up to use that feature.

  Best regards
  ERICO

• How to force the format landscape for mobile devices (phone &amp; pad)?

  Hello, I am designing a new Web page in muse. It will be necessary for this layout, view the page in landscape format (mobile / ipad & iphone).  is there an opinion to force the format landscape for mobile devices? whereas even if the device is in portrait format, the site will be displayed in landscape format?  support told me that I will have to add the code. could you tell me the code and how do I insert this to my page? Thanks for your help

  This might help you:

  fixed vertical layout for mobile