How to force use of the VM a specific host in a cluster?

Similar Questions

• Locking of the VMS in specific hosts in a cluster

  Is there a way to limit a virtual computer to a specific set of hosts in a cluster?

  I have created some DRS rules to separate and solidarity with virtual machines, but can not find a way (when it exists) to keep VMs locked to a set of hosts in a cluster.

  For example.

  8 guests: 6 with 16 GB of RAM and 2 with 32 GB of RAM

  2 development servers that will use 8 GB RAM each

  I want to force the dev VMs. 2 to migrate only between 2 hosts 32 GB while allowing the other VMS migrate freely among all the guests.

  Any ideas or suggestions are welcome

  Thanks in advance.

  DRS work in the field of the cluster, so there is no way actually lock VMs subset within the cluster

  If the creation of a separate cluster is not an option, a solution would be to keep the level of automation for those virtual machines to partially automated and then apply that recommendation which moves them to the desired hosts. Not a very optimal solution but it always work for non-critical virtual machines

  Méhul

  PS: If you correct or helpful answers, pl consider assigning points to perpetuate the spirit of these forums!

• OSB - How select variable used in the routing for buss request message. serv.

  I have "modeling of a stream of messages to a proxy service.
  According to the content of the incoming request message, a (conditional) branch is selected. The message must be routed to a business service in this branch.
  This service of the company has a different message definition requires that the proxy service. A kind of transformation is probably necessary. (not yet implemented)
  Question is how to choose what variable structure (I created a variable of Interface Service for business) that will be used during the call to the sales department.
  Only thing that I can choose, the service and operation.
  
  How to continue?

  The payload for the service of the company must be in the * variable $body. There are also other variables pre-defined as $header and $attachments that could make sense if your need to send SOAP headers or accessories for business service.

• How to force boot from the CDROM on Satellite M40 183

  I have error in the MBR on the drive in my laptop, it doesent from disk, before I had put into hibernation system (Windows XP).

  Now, I can't force boot from the CDROM
  in the bios, CDROM is selected as first boot-> nothing
  on bootking, I am pressing end F12 choose CDROM icons-> notking
  on bootking by pressing 'c'-> notking

  and I have a problem:
  -system does not boot
  -recovery disk will not start, and I can't fix it :/

  I'm sure that the cd drive is right.

  I recognized before, makes this hibernation, it is imposible to boot from the cdrom

  but there must be a way to force anyway.

  Thanks for any help.

  Mateusz

  Hello Mateusz

  The hibernation mode cannot be responsible for this kind of question. I'm sure that this option is properly put to the test and if there is some sort of suspicion it won't be available more.
  If you have any problem with MBR, it can also be damaged by some kind of virus. As far as I know that the easiest way to repair or rebuild MBR is to run the standard Microsoft called FDISK utility with a parameter/MBR, as
  A:\ > FDISK. EXE/MBR
  FDISK is a standard utility included in MS-DOS, Windows 95, 98, me.
  Please check this page http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkd_tro_evwd.asp Microsoft
  Good bye

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• How to force using the software adobe reader instead of the browser chrome.

  I created a form in adobe and put it on my site. I need to force the user to automatically open the file in adobe reader, because the form does not work in the browser. How can I do this?

  Hi pinewild,.

  It is not possible for you to do this settings, that's what the user needs to do to an end.

  Needs of the users to disable the PDF Viewer in the web browser plugin, now the PDF opens in the web browser & will need to be allowed to download. Once you have downloaded the PDF, it can be opened in the reader.

  Refer to this topic how Force open a PDF in Reader 11 instead of IE 10.

  Kind regards

  Nicos

• How to force google to the http context menu search?

  In my previous Firefox, Google context menu search ("google search for ____") would go to normal http Google search results. Now it goes to an https page. How can I get that back to the http of the Google results page? This is important because the filter that I use that works with http.

  Hello, all first please Update Firefox to the latest version for firefox 15 is no longer supported and affected by many known security vulnerabilities.

  context menu search uses the same search engine that is currently selected in the firefox search bar - so you can install a search engine google no ssl http://mycroft.mozdev.org/search-engines.html?name=google & category = 12 & then select it in the search bar...

• Try to install Visual Studio 2010 via security Download Manager but he stopped at 100%. How can I use. The SDC file?

  I was downloading visual studio 2010 using SDM (Download Security Manager), but he stopped at 100% and nothing happened. Now, all I got is a .sdc file and not now how to use it. Can any body please help me?

  original title:. Problem of the SDC

  Hello

  Since you are faced with the question to Microsoft visual studio, it will be better to post the same question in the Microsoft visual studio forums

  http://social.msdn.Microsoft.com/forums/en-us/category/VSTS

• How can I control what how data services use on the network?

  Recently, while I was not at my computer, something used 60GB of download on my network in the space of two hours of data. As far as I know, none of my programs should do that on their own. Is there some software or utilities that not only allows me to see the amount of data is transferred over the network, but also the amount of data used each specific program? Thank you.

  Hey Evan,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see you want to know how to find the data downloaded for each application on the Internet.

  So that you know in Windows 7 is not available from Microsoft software.

  There are third party software for the exercise of such functions, you can use your favorite search engine to search and find the same thing.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I use / on the url of my Web site?

  For example, I'm doing one of the page in my Web site show a field like this: www.imagemgama.com.br/more/dentistry/doctorA... (pages), but the software evolves to this: www.imagemgama.com.br/more-dentistry-doctorA. It uses - instead of /, can you understand? I want to separate the pages of my site with /, not with -

  In your example, URL, 'more' and 'dentistry' are separate folders. A slash ' / ' is used to indicate what subfolder, the web page is in.

  So no, you can't do what you want to do with a / unless you set up a structure of subfolder of your site that matches what you want your URL to look like. You must create the folder 'more', then inside that folder create another folder named "dentistry", then inside this folder create 'doctorA', 'doctor', 'doctorC' of the files, then place the web pages each doctors inside each of these folders. Which will you have the URL you are looking for.

  The bad thing is, you can't accomplish this with Muse. Muse does not support subfolders - yet. I hope one day.

• How do you use 'Connect the tracks' after 'Create vector layer forms' on one layer only shots?

  Hello

  Adobe After Effects CC

  2014.0.2

  Version 13.0.2.3

  I imported an illustrator file that was created in Illustrator CC 18.0.0. The file contains the outline of a logo. This is the logo with the filling, set to none and the race set to 1px.

  I drag the file logo_strokes.ai to the composition, right-click and click on create vector shapes.

  A new layer is created and the content 'drop-down', a fill layer 1 is created.

  When I select "drop-down" content and click Add / trim paths, a layer of trim paths 1 is created.

  When I animate the Trim paths 1, it seems to animate the fill layer, not the race.

  How I managed to animate only the line and shows quite a filling?

  Thank you.

  

  

  I have it.

  In illustrator, set align STROKE to the Center on each track you want to cut.

  He was aligned inside, which was the creation of the filling inside of After Effects.

  

  Thank you.

• The difference between them and how they are used by the first?

  I'll buy Adobe CS5 Master Collection. I have a job that has Win 7 Ultimate 64-bit. I have a Nvidia CX card that is installed. The Nvidia card came with fast HD. I will also receive a Matrox MXO2 mini for my junction box.

  My Question is what is the difference between - fast HD, elemental Accelerator, technology Max that you can get with the Matrox junction box, and all this will be of use to me or come into conflict with the Mercury playback engine. I don't think I'll buy the Max technology (no not necessary). But I'm confused on the other 3 being redundant or contradictory.

  Can someone please suggest another option for a junction box? Some companies do not support their products if you are using a Dell workstation.

  Any help would be greatly appreciated.

  Thanks in advance for any advice or suggestions.

  Martin

  Post edited by: Mallady1

  RapiHD is the former name of the elemental accelerator. The EA is a PP plugin that uses your graphics card from nVidia (via CUDA, nVidia GPU programming structure) to speed up encoding h.264/AVC output files. The previous link in this thread is wrong, but here is a link to work for the elemental Accelerator. The product is pretty much dead end, so much that it will be not a CS5 version. There is a stand-alone version called lucky, but it requires you to use Adobe products to encode firstly your timeline to an uncompressed AVI file (or any other format), thus defeating the purpose.

  The Mercury playback engine uses CUDA to accelerate the effects, transitions and insight into the chronology PP. It accelerates only marginally encoding, or not at all. There are a lot of threads on this forum discuss the EMT.

  I have a Blackmagic Design card, so I can't tell you anything about the Matrox card and its software.

• How to break through to the display of specific results using the navigation drill for?

  Hello
  
  I have two reports Rep1 and Rep2. I've set up navigation Rep1, Rep2 to drill by defining the column property to 'NAVIGATE' on Rep1 and have a 'GUEST IS' on Rep2.
  
  It was working fine when I tested it on OBIEE installing on my laptop. However, when I tried this on instance UAT one client I have the below question.
  
  Description of the problem: both Rep1 and Rep2 have multiple views. However, I need to drill the pivot view in rep1 to rotate the view in Rep2. I display the view of pivot since Rep1 on the dashboard page. However, whenever I try to break through to Rep2 he always exercises in table see REP2 but I want to drill to rotate the view in REP2.
  I tried to remove the table display in REP2 and then tried to navigate drill REP2. But now it does not display any view of Rep2.
  
  Is it possible to force display of pivot in REP2 drill to see to this navigation?

  BTW, if you go to your mode of Compound, what do you see for report 2? The PivotTable view is visible under the title of the view or is there anything under the title? There is a chance that you have a PivotTable that is configured, but you have not added to the compound mode and that you went straight to the Table to remove it. If so, you'd get your results. Please confirm that this is true or not.

• How to force UPPERCASE in the Date/time field

  I searched in google for this and I found this

  Current date in MMM JJ, style YYYY uppercase.

  $.rawValue = upper (num2date (date(), "JJMMMAA"))

  but I don't want the current date, I want the date that I select in the Date/time field.

  I tried, but it did not work

  $.rawValue = Upper($.rawValue)

  can someone help me?

  In the case of the field time (in Formcalc) output:

  $ = Upper($.formattedValue)

  just make usre that you specified the dsiplay pattern you want on the object palette.

• Can I know VM uses what the basic to ESXi host physical?

  Hello world

  In Linux environment, I can use ps o ESP to find process using what core (cpu) at the time.

  for example, the output below, I've known 3067 PID using 3 core (cpu 3) and PID 3091 use core 2 (2 cpu)

  EXAMPLE OF
  [root@linux ~] # ps PID TTY TIME CMD 3067 pts/0 00:00:00 bash 3086 pts/0 00:00:00 ps [root@linux ~] # ps pid tty time cmd, psr o PID TT TIME CMD ESP 3067 pts/0 00:00:00 bash 3 3091 pts/0 00:00:00 ps pid tty time cmd, psr o 2 [root@linux ~] #.

  How can I do this on ESXi? Is this possible?

  Thanks for your reading.

  Any advice is welcome.

  To generate output for certain processes and maintain a title line, run the command:

  Run $ ch

  then

  $ps-Tcjstv | egrep ' WID '. proc {name} ".

  or try

  $ps

  $ps-Tcjstv

  use $esxtop to get cpu, pcpu details