How to get a list of all reports created in OBIEE?

Similar Questions

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• How to get a list of all components in the EPM environment and their versions?

  Hi all
  
  E.M.P. verison 11.1.2.2.x
  
  I was wondering if there is an easier way to get a list of all components of the EPM environment (planning, Shared Services, EAS, Manager of Calc, etc.) and versions for them all.
  
  Currently I just go to help-> about the browser, but through the workspace, it gives only the version of workspace of the tabs and irrelevant.
  
  I'm trying to find the version so that I can apply the relevant patches.
  
  Thank you
  
  See you soon,.
  Abhishek

  Access

  c:\Oracle\Middleware\oracle_common\OPatch and race

  opatch.bat lsinventory - oh C:\Oracle\Middleware\EPMSystem11R1 - jre c:\oracle\middleware\jdk160_21-details

  This will give you the complete list of products.

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• How to get a list of all the pipes in a ThinApp

  I have a simple program to list all files in a folder.  I use it to get a list of named pipes by the way
  \\.\pipe\*as the argument, but it does not work if I Pack the program as a fine application.  I get the error code 3 (ERROR_PATH_NOT_FOUND).  I tried to use CreateFile on
  \\.\pipe\but he also failed when running as a ThinApp. Are their ways to get a list of all the pipes in a ThinApp?  Here is the source code.

  #include <windows.h>
  #include <tchar.h>
  #include <stdio.h>
  
  #include "stdafx.h"
  
  int main(int argc, char* argv[])
  {
     WIN32_FIND_DATA FindFileData;
     HANDLE hFind;
  
     if( argc != 2 )
     {
            _tprintf(TEXT("Usage: %s [target_file]\n"), argv[0]);
            return -1;
     }
  
     _tprintf (TEXT("Target file is %s\n"), argv[1]);
  
     hFind = FindFirstFile(argv[1], &FindFileData);
     if (hFind == INVALID_HANDLE_VALUE) 
     {
            printf ("FindFirstFile failed (%d)\n", GetLastError());
            return -1;
     } 
     else 
     {
            _tprintf (TEXT("The first file found is %s\n"), 
                 FindFileData.cFileName);
  
            BOOL nextFile = FindNextFile(hFind, &FindFileData);
  
            while (nextFile)
            {
                 _tprintf (TEXT("The next file found is %s\n"), 
                           FindFileData.cFileName);
  
                 nextFile = FindNextFile(hFind, &FindFileData);
            }
  
            FindClose(hFind);
     }
  
     return 0;
  }
  

  OK, so what about the original example of FindFirstFile, if I try with 4.6 it does not work for me. I use 6 VC to create the application and then add it to the cmd project and then rebuild. I tried these combinations:

  App.exe \\.\pipe\* (this works)

  App.exe \\.\pipe\ (this does not work, in native mode as it does not work)

  App.exe //./pipe/* (this works)

  App.exe //./pipe/ (this does not work, in native mode as it does not work)

  can you tell me about the results you get when you try the above?

  Thank you.

• How to get a list of all the elements as a text file in Indesign

  I try to get the list of all of the images related only text using AppleScript? Please help me

  Just replace 'filePath' with 'name' (line 5).

  Peter

• How to retrieve a list of all report templates

  I want to retrieve the list of templates to create reports in foglight.

  I see no option to export the list in the display y at - it another way to do it.

  Kind regards

  Learn 2 eager

  Hello

  There is a report entitled "available reports" that you can run

  

  It uses a table of available reports, which you can see in the categories > reports.
  You can test the PDF and export the data or copy/modify to be something that you can drag to a dashboard (if you choose to make it available as a view to drag and drop make sure you test first on a test server).

  

  It may be useful

  Golan

• How to get a list of all the tags of XMLElement

  (CS5, Win7 64 bit)

  I need a list of all unique XML tag names in a given document (just as the Panel tags in InDesign itself).

  I couldn't find a 'normal' way (builtin - in the property or method) to obtain the information. Instead, I found that I had to process recursively through the entire tree of XMLElement, starting with the root element. For a large document, it can take almost a quarter of an hour, and sometimes I have to do it for a book of InDesgin INDD files huge more than a decade.

  There MUST be a better way, right?

  It would be better if I was done through all the PageItems in the document and then recurse XMLElement each PageItem l‟arbre? I guess that would not make a difference to fade way.

  I'm open to suggestions...

  TIA,

  mlavie

  Try this,

  $.writeln (app.activeDocument.xmlTags.everyItem () .name);

• How to get a list of all available updates and dependencies for the MS products

  We are currently working on a patch report (compliance policies).
  We need to scan all workstations for the patches installed (already DONE!).
  Now we need to get a XML / List / or something telling us all the patches to release MS, affected software and dependence.
  Any help?

  See if this sugesstion can help you to:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6da1bc16-9919-4762-85D5-95dee3aa15fd

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a75f8d76-8689-4661-A546-90b555d80c9d>

  Windows XP security updates and patches for 2010

  http://www.softwarepatch.com/Windows/Windows-XP-security-updates-2010.html>

  03/23 / 1107:12: 05:00

• Please, I beg you! Need a c# example on how to get the list of all host ESX via SDK... I can connect... etc...

  Hello

  I am train to figure this out for a few hours now... and all I find is some examples related to the properties of the VM or something else.

  Now I am able to connect to the server and retrieve things like: Server date and time, version of the API etc...

  I would like to get a code example that would give me the list of ESX servers include within a Virtual Center Server... the last thing I used I got something like: If. Content.searchIndex.ToMo & lt; Indexderecherche & gt; (so). FindEntities & lt; HostSystem & gt; (null, null);...

  This well liked not... Maybe it was too easy...; (o)

  And if you also have a quick way to let me know how to retrieve a simple thing as a host network adapter config... as if I want to know if it is a static address or dhcp etc...

  PS. I have created also a ref to the service instance and service content.

  Here's an example to get the version of the API: (I want that same thing as host nic for setting... but have not yet found the correct syntax)

  var test = SERVICE_CONTENT.about.apiVersion.ToString ();

  MessageBox.Show ("test");

  Also... YES, I'm looking at the SDK prog. Guide... but all of the examples in which are in java... and a little far, the syntax is the same as c#

  Jon

  Thank you and I will award points to a significant response...

  consoleVnic is an array of HostVirtualNic. Therefore, you must print a specific item from the array and not the array itself. It seems that this is the problem.

• How to get a list of all the OS installed in the vCenter?

  Hello

  I would like to know how the list will vCenter name, Cluster, the name of the installed operating system, virtual computer within a CSV file list all OS installed in our virtual machines, in other words.

  Thank you

  Take a look at the script of Lucd in http://communities.vmware.com/thread/395151

• How to get a list of files using BB10 native waterfall?

  Hello

  Please help me how to get the list of all the files in the root directory of the memory card. I try to use QDir::entryInfoList and then repeatedly use QFileInfo::isFile or isDir to search all files in the memory card. But I can't find the files or the directory of the path root only like that, I found., /, /, /, /. Can someone help me please?

  Thanks for any help.

  Victor.

  Take a look at https://developer.blackberry.com/native/reference/cascades/qdiriterator.html

• Is there a way to get a list of all applications / updates that are cached on your server?

  Is there a way to get a list of all applications / updates that are cached on your server?  Of course, we see the space that contains each category.  But I would like a detailed list of the individual items that are actually cached.

  ITD be even better if I could get a scoreboard that showed me how many times a particular point was served to customers.

  Yes.  But you need a little magic Terminal to get the desired data.  Caching server is managed by a sqlite database.  To examine the contents, follow these basic steps:

  1: connect to the database using the following command:

  sudo sqlite3 /Library/Server/Caching/Data/AssetInfo.db

  2: to structure the data, run these two commands to the sqlite command-line prompt:

  .blog column

  . Headers on

  3: to find everything that is stored, run this command (you'll get iCloud cached documents, books, iOS apps, etc.):

  Select * from ZASSET;

  4: to narrow the results down to elements called by software updates, try this:

  Select * from ZASSET where ZURI as "content %";

  You could get a line that looks similar to the following:

  403 2 6 0 2012986793 474949928.477396 476912032.644505 e03448847909547fb8c7d4ecd5a7b6dd FAB32A72-DE33-469D-A7DF-3CE1A1F9A4D2 on Wednesday, August 5, 2015 18:00:30 GMT

  / Content/downloads/42/44/031-30888/bhrkylcnycxmtug9daw3g4magqb7dl7hba/OSXUpdComb o10.1

  (added the newline for readability)

  It is an OS X Combo update.  It is located on the drive to library/server/cache/Data/FAB32A72-DE33-469D-A7DF-3CE1A1F9A4D2 / the file is probably named 0, but if you want to use it, just add at the end of the .pkg file.

  I hope this helps.  Put server cache saves a lot of data.

  Oh, to quit the sqlite command line tool, simply type .quit and press return.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• How to get a list of the updates of Windows XP, released in 2010.

  How to obtain the list of all updates, patches, patches applied to Windows XP and released in 2010 with the possibility to download this update.

  Is there a Microsoft Web site or tool that allows me to get information like here http://www.softwarepatch.com/windows/windows-xp-security-updates-2010.html?

  No. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to get a list of computer programs

  How can I get a print with a list programs stored on my computer (Vista)

  Hello Dutch MN,.

  You do not need to install another program, you can do it from your command line on Windows Vista and Windows 7.
  Click here for more information on WMIC using which you can export to a text file or HTML file and print out.l

  http://www.vistarevisited.com/2008/09/27/get-a-list-of-all-installed-programs-in-Vista-from-your-command-line/

  This should answer your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to get the list of RDM?

  Hi all

  In our environment both of RDM is presented to different virtual machines in physical compatibility mode. It was very difficult for me to keep track

  Could you get it someone please let me know, how to get the list of the RDM presented to ESXI 5.0 host?

  Thank you!

  Ravindra Reddy

  Thank you... A P... for your response tools RV is the right tool, but I wanted to naa number of LUNS as well.

  After 2 hours, I had below power CLI command to get the list of the virtual machine.

  PowerCLI C:\ > Get - VM | Get-hard drive - DiskType "RawPhysical", "RawVirtual" | Select name, Parent, ScsiCanonicalName, DiskType | FL | Out-file C:\RDMlist.xlx

  Thank you!