How to get the details of VM settings using cli power?

Similar Questions

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• How to get the frame number current timeline using jsx?

  How to get the frame number current timeline using jsx?

  Thanks for the link!

  Clarification: I was looking for the current image on the timeline of the video. OP he mentions that he had found how to get that so I searched a bit more and found this thread: Re: can I inpoint in read/write and out-point of the clips in a group of video with scripts? They have the following functions, I have not tried yet, but it seems like it should work.

  function getCurrentFrame() {}

  try {}

  Var ref = new ActionReference();

  ref.putProperty (charIDToTypeID ('Rprp'), stringIDToTypeID ('currentFrame'));

  ref.putClass (stringIDToTypeID ('timeline'));

  var / / desc = new ActionDescriptor();

  desc.putReference (charIDToTypeID ('null'), ref);

  var TC = executeAction (charIDToTypeID ('getd'), desc, DialogModes.NO);

  Return TC.getInteger (stringIDToTypeID ('currentFrame'));

  } catch (e) {return null ;}

  };

• How to get the details of the item purchased in R12

  Hello everyone, use Oracle Application R12.
  I need the following information for all purchased object,
  How to get the nom_element, $vendor_name, ordered_quantity, rec eived_quantity item_id,
  returned_quantity.
  Thank you.
  
  Kind regards
  Gurujothi.

  Hi Gurujothi,

  PL.try following SQL. It will give you all the details of the purchase.

  SELECT PO_NO, B.LINE_NUM, C.SHIPMENT_NUM, A.SEGMENT1
  C.QUANTITY, C.QUANTITY_ACCEPTED, C.QUANTITY_BILLED, C.QUANTITY_CANCELLED, C.QUANTITY_RECEIVED, C.QUANTITY_REJECTED, D.QUANTITY QUANTITY_RETURNED,
  B.ITEM_ID, E.DESCRIPTION, F.VENDOR_NAME
  OF PO_HEADERS_ALL A, PO_LINES_ALL B, PO_LINE_LOCATIONS_ALL C, RCV_TRANSACTIONS D, MTL_SYSTEM_ITEMS_B E, PO_VENDORS F
  WHERE A.ORG_ID = & OU_NAME
  A.PO_HEADER_ID = & PO_HEADER_ID
  AND B.PO_HEADER_ID = A.PO_HEADER_ID
  AND C.PO_LINE_ID = B.PO_LINE_ID
  AND D.PO_LINE_LOCATION_ID (+) = C.LINE_LOCATION_ID
  AND D.TRANSACTION_TYPE (+) = "RETURN TO THE PROVIDER.
  AND E.INVENTORY_ITEM_ID = B.ITEM_ID
  AND E.ORGANIZATION_ID = C.SHIP_TO_ORGANIZATION_ID
  AND F.VENDOR_ID = A.VENDOR_ID

  concerning
  Sanjay

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• How to get the details in an expression

  Hi all

  Just start with vsphere powerCLI again and I wanted to understand the basics of hash tables. I've been running this command as below:

  Get - VM VM1. Get-View | Select-Object Name, @{N = "ToolsVersion"; {E = {"$_.config.tools.toolsVersion"}}

  and I wanted to understand:

  1. am I correct assuming that by this, we create a new Toolsversion property object?

  2. How can I retrieve all the values that are available to me? Specifically, I want to ask from where comes this expression comes, E = $_.config.tools.toolsVersion and how to find all the expressions that are available to create new properties.

  THX,

  AJ

  1. Yes, the Select-Object cmdlet will produce a new object on this object, you have a new property called ToolsVersion

  You can see by channelling the results of the Get-Member cmdlet.

  2. with the cmdlet Get-View, you get the vSphere .net object object.

  These objects of vSphere are described in the VMware vSphere QAnywhere

  In this particular case, you can check the VirtualMachine object.

• How to get the gif file hosted by using the Http connection?

  Hello

  I have an application that downloads animation gif from a server by using the http connection. Here is the code I use to download the image.

  try {
  
              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);            httpConnection.setRequestMethod(HttpConnection.GET);
  
              if (httpConnection.getResponseCode() == HttpConnection.HTTP_OK) {                DataInputStream dS = httpConnection.openDataInputStream();
  
                  byte[] data = new byte[dS.available()];                dS.read(data);
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(data, 0,data.length);
  
              } else {                throw new Exception("ResponseCode:" + httpConnection.getResponseCode());            }        } catch (Exception e) {                        gifImage = null;            e.printStackTrace();        }
  

  the problem with this code is, when the gif file is 1175 bytes above, it does not load the gif.

  example:-If the gif on the server is 1500 bytes, this code retrieves only 1175 bytes.

  I think that the rest of the bytes are sent in a different package. But how to get them.

  can someone please provide a code for buffering the inputstream?

  any help is appreciated.

  Dieye

  Hmm, nobody seems to know how to do, it seems. Here's how I did it.

              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);
              httpConnection.setRequestMethod(HttpConnection.GET);
  
              int responseCode = httpConnection.getResponseCode();
              if (responseCode == HttpConnection.HTTP_OK) {
                  inputStream = httpConnection.openInputStream();
                  ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
  
                  byte[] buffer = new byte[256];
                  int len = 0, imageSize = 0;
  
                  while (-1 != (len = inputStream.read(buffer))) {
                      byteArrayOutputStream.write(buffer);
                      imageSize += len;
                  }
  
                  byteArrayOutputStream.flush();
                  byte[] imageData = byteArrayOutputStream.toByteArray();
                  byteArrayOutputStream.close();
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(imageData, 0, imageSize);
  

• How to get the storage allocated profile and used the plugin vCloud 5.1 Vdc

  How can I get the storage allocated and used for a Vdc in vCloud 5.1 plugin?

  VCloud plugin 1.5, there was a property of VclVdc.storageCapacity give us the space allotted, limit, use (s) and overhead costs.

  VCloud plugin 5.1 we allways null VclVdc.storageCapacity. Then VclVdc.getStorageProfiles () but presents the objects, there is that the "limit value".

  ¿WHERE are the other values?

  I have attached two screenshots. vCloud console shows the data, but not vCloud plugin.

  Thank you very much.

  Damian

  Tell me if this work. This was written in a few minutes.

  var host = vdc.getHost();
  
  var queryService = host.getQueryService();// toAdminObject().getAdminQueryService();
  
  var profs = vdc.getStorageProfiles();
  
  for each (var prof in profs) {
  
      var expression = new VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF, prof.getReference().href  , VclExpressionType.EQUALS);
      var filter = new VclFilter(expression);
      var params = new VclQueryParams();
      params.setFilter(filter);
      var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
      while (resultSet != null) {
          var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
          System.log(records.length + " records found");
              for each (var record in records) {
                  //obtain data from record
                  System.log("storageUsedMB : " + record.storageUsedMB);
                  System.log("storageLimitMB : " + record.storageLimitMB);
              }
      resultSet = resultSet.getNextPage();
      }
  
  }
  

• How to get the full name (device disk) using esxtop?

  Hello

  I am looking for storage settings using esxtop - pressing 'u' for drive.

  As I use the iSCSI (open file server) device, I couldn't see the identifier of the full device. Can someone help me to get this.

  I have attached the screenshot of esxtop for this...

  

  Any idea? Thanks in advance.

  In ESXTOP enter a capital 'L' and type a number to make the larger DEVICE field. Depending on the length of the name of the device - you might need to up to 40 characters to present the full name.

  Entering the '?' in ESXTOP will give you the options you can set (this information is also there as well).

• How to get the code PIN Blackberry 10 using javascript for BB10 Webworks App?

  Hi all

  I have developed web application for blackberry 10 using the emulator to ripple and Blackberry 10 Webworks SDK 1.0.4.11.Here I put the automatic connection of my web application... So I want to get the Pin 10 of Blackberry number using javascript... Please help me... Someone knows... Thank you very much...

  Kind regards

  Marimuthu_P

  Which is documented here for WebWorks 2.0: https://developer.blackberry.com/html5/apis/beta/blackberry.identity.html#jbo1385148789774

  and here for WebWorks 1.0:

  https://developer.BlackBerry.com/HTML5/APIs/gold/BlackBerry.identity.html

  You want the uuid property.

• How to get the webservices project customer specific use Oracle.

  I have a Web services project I developed in VS2005 where I use the Oracle.DataAccess.dll provided by Oracle 10 g ODAC to connect to an Oracle 8.1.7.4 database. I add a reference to the dll in the folder c:\oracle\product\10.2.0\client_1\ODP.NET\bin\2.x. I create and publish Web services and checked that Web services are working correctly. I ran into problems when I installed the latest version of the ODAC for Oracle 11, where the webservice Gets the following error ORA-03134 - this version of the server connections are more supported. Based on what I read here and ther panels, it seems that when I installed the ODAC for Oracle 11 he installed a policy file that redirects all calls to use Oracle 11 components data access rather than that I've specified explicitly in my project.
  
  Is it possible for me to always have the components of Oracle 11 working side by side with Oracle 10 g and forced my project to always use the components of Oracle 10 g?
  
  Published by: lordharlock on March 3, 2010 07:17

  Hello

  I just did a quick test with binding in an app.config file redirection, and has precidence over policy in the gac file.

  Here's my app.config. I compiled with 2.102.2.20, the app ran with 2.111.7.0, despite the 2.111.7.20 policy in the gac file.

  It will be useful,
  Greg

• How to get the details of the activity of a process through the OMB more flow?

  Hi all
  I would like to know how to obtain details of the activity (bulk_size, operating_mode) of an activity by using more of the OMB.
  
  OMB + > OMBRETRIEVE PROCESS_FLOW "MY_PROCESS" ACTIVITY "MY_MAPPING"...
  
  Thank you!
  
  Sebastian

  Hi Sebastian

  For example, to retrieve a value from the mode of operation of the mapping activities
  GET PROPERTIES 'OPERATING_MODE' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA"ACTIVITY"LOAD_PRODUCTS"PARAMETER (VALUE)

  If the parameter is bound to a variable name of the property is REQUIRED.

  You can retrieve the actual practice settings;
  GET SETTINGS 'LOAD_PRODUCTS' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA' ACTIVITY

  See you soon
  David

• How to get the MAX 'Initial configurable settings' of IVI driver

  
  
  

• Get the details of storage card using powershell

  Hello

  I'm looking for ways to get complete information on storage on my ESX box adapters. I fell on below script below, but it gives the target iqn details where I need host details iqn, is it possible to get this information?

  $esxImpl = get-VMHost-name

  $storImpl = get-VMHostStorage - VMHost $esxImpl

  $stor = get-view $storImpl.ID

  foreach ($adapter in $stor. StorageDeviceInfo.ScsiTopology.Adapter) {}

  Write-Host $adapter. Adapter

  foreach ($target in $adapter.) Target) {}

  Write-Host $target. Transport.IScsiName

  }

  }

  Thank you

  Of course, this info is in the same object, different ownership.

  Try this adapted script. Should give you a better overview of your iSCSI topology.

  $stor = get-view (Get-VMHostStorage -VMHost (Get-VMHost -Name )).ID
  
  $stor.StorageDeviceInfo.HostBusAdapter | where {$_.GetType().Name -eq "HostInternetScsiHba"} | %{
    Write-Host "Device" $_.Device "iSCSI" $_.IScsiName
    $device = $_.Device
    $stor.StorageDeviceInfo.ScsiTopology.Adapter | where {$_.Adapter -like ("*" + $device)} | %{
          $_.Target | %{
          Write-Host "`tTarget" $_.Target
          Write-Host "`tIScsiName" $_.Transport.IScsiName
        }
    }
  }
  

• [JS CS4/CS5/CS5.5] How to get the return value from Javascript using doScript

  Hi all

  I'm calling javascript from COM (c#) and it works fine. Passing parameters to javascript and playback by using the syntax of the [x] arguments also works very well.

  What I can't seem to get to work is to know how to move something from javascript to the calling COM Summoner, in this case, c#. How and where should I place the return value in javascript?

  Thanks in advance.

  Rachiud

  doScript() evaluates an expression, so just make sure that your Javascript is an expression.

  For instance "(3 + 3)" 6 "