How to get the microphone audio through speakers

Similar Questions

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• Windows XP mode - 7: how to get the Realtek Audio Drivers with GS Wavetable outside normal? Instead of RDP Audio driver!

  1. I upgraded my comp to Windows 7, Ultimate because I need to use many XP programs. What I've discovered, is the virtual XP Mode is not the same thing as XP regular and many programs do not run properly. Particularly theAudio out to lunch and MS GS Wavetable is not available in XP Mode.

  2 - I end up having to buy another XP-Professional and installed in the same notebook. I have to turn off the laptop restart and select the Windows 7 to XP operating system. All old programs work fine under XP.

  3 - I continued looking for a fix for the XP Audio Mode or virtual. Almost 2 years now, I can not find such a simple solution.

  4. today, I found something on the Microsoft RDP Audio driver. What is the reason? Anyone know?

  5. are there available MS drivers or resources?

  I'm not interested in the commercial programs or attempts to scan my computer. MS sold Windows 7 that can run XP so I think that Microsoft is responsible for fixing.

  Thanks in advance,

  VT

  Windows XP mode - 7: how to get the Realtek Audio Drivers with GS Wavetable outside normal? Instead of RDP Audio driver!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• How to get the .rbf and .through files?

  Hello I am currently working on the project, which provides for automatic deployment and launch programs everchanging.

  Ev3 are scattered in different schools. I wrote a simple script that can download a file and then send it to ev3 via wifi.

  But I'm currently stuck on how to get .rbf and Labview .through files.
  I know that I can deploy .vi using the target to ev3 and then upload these files to the PC, but I can't add script.
  Is it possible to compile .vi to the file?

  Sorry, try this

• Qosmio G40: How to get the sound on 4 speakers rear

  Here's the thing, 3 days ago, I bought the G40 model. I needed a laptop on which I can work with Photoshop, Illustrator and Corel Draw.

  When I bought it, I went on site update from toshiba to see what is new and what I need to be updated. Afterwards, I checked on a few other sites of manufacturers (realtek, nVidia, etc.) which is new, because they get the first pilots.

  I noticed that there is a new driver for sound card for this computer so I decided to donwnload it and run the drivers. Everything went well, but after installation I lost the option DolbySurround and instead of all 4 bass speakers, only 2 speakers worked so I decided its better to revisit the original Toshiba drivers.

  After that I downloaded the drivers from the Toshiba site, installed and put to day all, I noticed that the software for audio, downloaded from Toshiba site has no dolbysurround option. Help, please!

  Secondly, I also removed the TOSHIBA accessibility option, which is to control the 'F' keys After that, I can't turn the Touchpad mouse. Help, please? Ideas, suggestions?

  What to say dude. Seems to be something wrong with any system files or registry entries
  Why change something if you have no problems?

  Take my advice and never change a running system ;)

  So now your problem and some advice how to solve this stupid question!

  I would recommend to restore the operating system to the point of time at the beginning. Use the tool from Microsoft called system restore.
  Eventually, you know this tool since the MS XP OS.
  You should find somewhere in accessories.

  If this procedure is not enough, you could use the Toshiba Recovery CD and could reinstall the whole OS!
  But before you make the installation of the recovery CD don t forget to back up your important data! ;)

  Good bye

• How to get the beats audio works on windows 7

  Envy just downloaded windows 7 on my hp dv7 and my audio beats no longer works. Is there a driver I need to download to correct the problem? Or is there a configuration I need to do?

  Hello

  Have you tried the first link? Please try it now if still no luck please only use scan now from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5318926

  Kind regards.

• How to get a cleaner audio (Dell M6300)?

  I have a dell M6300 I want to use for gigging jazz. I run Band-in-a-box and also some materials taken from wma lossless. In my home studio, I use BIAB to backings, with some audio recorded and added through Ableton live. I unload the finished tracks and identifies upward with Windows media player.

  I tried to use a Behringer UCA202:

  http://www.dolphinmusic.co.UK/page/shop/flypage/product_id/8522

  for the sound signal both a decent amp combo Marshal and also a much amp separated largest with 600w speakers. On both systems, there's a snap low residual level that seems to be related to the activity of the CPU.

  Thinking maybe the Behringer unit was at fault, I just bought a M-audio USB accelerated training:

  http://www.soundslive.co.UK/product.asp?ID=3773

  This gives exactly the same problem!

  I'm doing something wrong? Why is the output of these devices not cleaner? Anyone have any idea how to get the cleanest result?

  There's an outpt of tos-link (spdiff) on the Behringer device, which I tried to connect to a hi-fi system. That does not give a clean result. For gigging power amps don't usually have a spdif input. I could blow another 60 quid on a digital-to-analog gizmo to go in the power amp but its becoming of the rats nest and seems a way ott to do.

  Can someone enlighten me on the best way to get an output very clean sound of this portable expensive top-of-line? So far I am not impressed in this respect (although he flies for my graphics work)

  Thank you

  John.

  (published music digital forum)

  
  

• How to fix the microphone in Compaq Presario R3000

  Original thread title - how to fix the microphone in Compaq Presario R3000?

  Hello
  I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

  Hello

  1. What problem is only on Skype?

  2. were you able to use this microphone earlier?

  3 have there been any changes made on the computer before the show?

  4. what operating system are you using on your computer?

  I suggest you to consult the steps mentioned below and check if it helps.

  Run the troubleshooter of sound recording
  Click on the link below and run the troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  See the following Help article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, then I suggest you to contact Skype to get help.

  https://support.Skype.com/

  It may be useful

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!

• Satellite C660 - 18 c - can't get the microphone to work

  So, I couldn't get the microphone to work so I bought a new one. I also can not get this to work. I tried everyway I can think of and he will simply record is not all sounds and yes the microphone is on and the volume is full.

  Can someone please help me solve this? Its driving me crazy!

  Hi belthazora,

  Just to make sure that we are talking about an external microphone that you have connected to the microphone jack and not internal? I ask this question because the laptop doesn't have the internal mic.

  Anyway, if you use an external microphone ensure that it s listed in sound devices under the recording tab. You see it there?

  I also recommend an update of audio driver if it doesn t work. You can download all the updates on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.

• HP 9470 m Ultrabook, Win8 - how to get the 3G connection?

  Hello

  I got a Ultrabook 9470 m of work with Win7 installed. Everything works, cool, but I wated Win8 (64 bit) for my own stuff. So, I installed Win8 (dual-boot) for my use personal. Of course, I have no HP drives or whatever it is. -No worries, I found all drivers for Win8-64 in this site ok. And now everything is recognized correctly.

  But I don't know how to get the 3G card to connect. On Win7 HP connection manager takes care of that. But there is no connection manager for Win8. And google results only direct me to choose the network in the bar 'charm '. Great, but there are only available WiFis appear...

  ... --- ...

  Well, I finally got this resolved. -As usual, it'S just a driver issue, as always with Windows... I suppose that there is nothing new under the stars.

  In any case. Thanks for Cloud_Strider to point to the firmware upgrade. I did, but it alone did not help. BUT I don't know if it was still a part of the solution. So, thank you!

  Unfortunately, Ericsson or Navatel drivers broadband did the trick. -It's the only ounces available on the site of HP support for this laptop. = (Fortunately, I had (finally) look in Device Manager to see what drivers are installed. Seems that this braodband card is a HP un2430. Looking for these drivers for WIndows 8 on Google showed me finally good page on HP which she link to fresh (from March 2013) drivers for this card.

  After removing the old drivers (+ restart) and new (+ reset) installation, broadband is now available. I now write this with happiness through 3 G connection. =)

• How to get the options standby or hibernation in safe MODE? [Windows 7]

  I searched and sought, could not find anything either, but my thick head still think there may be an answer somewhere.

  He said that I couldn't not Audio on safe MODE, got it working very well after following a tutorial. I think that the same thing can be done with the SLEEP or hibernation, I could be wrong.

  Now, I still want to know how to get the SLEEP or HIBERNATE in safe MODE,
  I don't care if my attempts to spoil anything on this shit pathetic excuse of HP Compaq for a laptop. I don't want any other help other then getting options 1 or both. This laptop has built in fan (had 3 other fans do), so why I run safe MODE or it would melt faster.

  -Windows 7 Home Prem 64-bit.

  TLDR;  Anyway to get the sleep or Hibernate in safe MODE?

  Hello, Spencer,.

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Shawn "Cmdr" Keene [MVP] replied on May 28, 2014 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/sleep-in-safe-mode/d91b5ec4-8c45-4D6E-A899-eaba36209de0?DB=5

  Additional information:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to get the ID of the Tweet with Twitter API ME V 1.9?

  Hello.. '

  I'm doing the request through the integration of twitter...

  Now I am facing a problem which I don't know how retweet...
  And all I have to retweet corresponds to the id of the tweet itself.

  Anyone know how to get the tweet id?

  Kind regards

  Eric

  if (m.verifyCredential()) {
      Tweet t = new Tweet("Hi!!! This is my first tweet via Twitter API ME. \o/");
      TweetER ter = TweetER.getInstance(m);
      t = ter.post(t);        //Now, check this instance of "t" what properties it is having, I guess it should have tweet ID also.
  }