Similar Questions

• Satellite Pro 6100 often randomly turns off and bad RTC error

  Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

  HI Conrad,.

  Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

  The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

  Kind regards

• NTFS bad block errors in Event Viewer

  I have a Dell 510 m with XP and a Toshiba HD. There are a few bad blocks that I see with the Diagnostic CD. They have not worsened in recent years. Recently, I saw a few 'Bad Block' errors in the event viewer. Diianostic CD shows me a bad block as before.

  My question is: when the Bad Block error, is to say that the ranking system, NTFS marked which also block bad, so he's not getting used again?  Otherwise, CHKDSK (the /R option?) will find the new bad block and mark it unusable?  If not, is there a way to do this?

  There is no option to replace the HD. I just need to keep this laptop going long enough to decide what to buy to replace.

  Thank you

  Peter

  Peter

  24 KB in bad sectors. = 6 clusters currently is not a serious problem. However, you must check regularly for some time to ensure that the number does not increase.

  Of course, any bad cluster can be bad news if it coincides with the location of a vital system file.

  You must also use chkdsk for repairs under this part of the report:
  Correcting errors in the Volume Bitmap.
  Windows found problems with the file system.
  Run CHKDSK with the /F (fix) option to correct these.

  Edit, Find with Volume Bitmap use search for more information:
  http://en.Wikipedia.org/wiki/Hierarchical_File_System

• Get 'bad image' errors at startup on XP

  You don't know if it's OK jst the chip but discovers this channel via Google after trying two registry fix downloads that were purchased.  Problem - suddenly 2 days ago I found that I couldn't get into XP without having to cancel about 15 messages in 'Bad Image'.  As noted that not a single program at fault, I would be grateful for any advice on how to fix the problem please.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-XP-bad-image-start-up-message/54e44de9-ea47-4489-AC15-243a66eedb2a

  Halima, thank you very much.  While waiting for a response, I noticed that I had a common feature of many messages 'bad image' to cancel on each startup was "Bearshare" in the description of the DLL, so I re-installed the program again and then typed "problems of Bearshare bad Image" in google, which led me to this site - http://www.geekstogo.com/forum/topic/294780-bad-image-errors/

  where I downloaded their "Revo Uninstaller" which allowed me to perform a deep unistall of Bearshare.  After reboot, I haven't lived any other message 'Bad Image'.  I hope that it will still be the case, but I'll keep your advice in case I need to try something else.  Thanks again.

  Geoff

• 'bad checksum' error when starting

  When I rebooted my computer, today, the ordinary boot process was interrupted by a black screen with an error message that says "bad checksum" and gave me the option to start anyway, or enter the configuration.  I chose to start instead of enter the configuration.

  After I submitted this question on the forum, I restarted my computer and got this error message (I typed exactly how it appeared on my screen)

  change of service configuration
  : Disk error
  Press F2 to continue, F1 to enter setup

  .. then I pressed F2 to continue and then the message 'boot sequence error' appeared for about 0.5 sec under the previous error message above, then my computer started as if nothing had happened

  I want to know what caused this 'bad checksum' error and the sequence/boot drive error and how to solve the problem (s)

  I have 32 bit Windows Vista Home Basic w / service pack 2

  Thank you

  ehill612,
  Thank you for visiting the Microsoft Answers community forum.

  Has anything changed summer on your system recently as new hardware or software installed any new updates?

  What kind of computer you have - laptop or desktop computer and what brand and model?
  This information will help us to help you solve this problem.

  Start by checking the file system corrupted system and check the hard disk for errors.

  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.
   
  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  Send us information about your system and the results of these tests.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Bad image error

  I am constantly bad image errors as soon as I turn on my computer until I turn it off. It displays in the form: Windows\system32\AVGRSSTX. DLL. I don't know how to stop or fix this problem.

  It is a problem with AVG http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=119251&type=0

  My recommendation is that you uninstall AVG using the appropriatehttp://www.avg.com/gb-en/download-tools removal tool

  You can then reinstall AVG or other program antivirus.

• Sam s173-1415: cannot use the restore CD - 'Bad Machine' error message appears

  I have a s173 1415. I had to format the hard drive, when I went to use the original CD that came with the laptop it said BAD MACHINE. So I installed Windows XP.

  Now, I have all the necessary drivers and can not find one for the dvd/cdr drive, so sometimes the disc is recognized and sometimes it disappears.

  I want to set the laptop to original state, but the CD won't let me.
  What can I do?

  Hello

  It s very strange that this error message appeared.
  Generally all compatible CD should be delivered with this laptop.
  If you want you can order form taken CD supported and compatible, Toshiba service partner. It s not very expensive.

  You will also find the page of all drivers on the Toshiba driver download:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#

  Please install all drivers in the correct order. The chipset utility must be installed and the beginning.

• Bad Image error - igdumdim32.dll

  Igdumdim32.dll somehow got on my Windows 7 system. From what I can find, it is a dll for Windows 8. Get the error message: "C:\windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error...". "Very irritating and does not disrupt some features. What should I do?

  Let me describe the problem as completely as possible.

  Reads the 'error' message: "C:\Windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator... »

  The "error" message occurs repeatedly. It occurs when I try to open a video on Foxfire. It's entitled"FlashPlayerPlugin_15_0_0_223.exe - Bad Image. "When I click OK, the message reappears. It appears 3 times in total and after I clicked OK whenever the video runs correctly, but it won't go full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (titled qw.exe - bad Image), QuickTime Player (titled QuickTimePlayer.exe - bad Image), Garmin Express (titled Express.exe - bad image) and others. In all cases the message come up 3 times and once I clicked OK for everything the program runs normally.

  I tried to find igdumdim32 in windows\system32, but he's not here. There's an igdumdim64 it. However, I found in C:\Windows\System32\DriverStore\FileRepository\5.inf_a...etc. It is also in C:\Windows\SysWOW64.

  Just in case someone else looking at this, I finally corrected this problem.  If you're reading this, it probably means that you have the same problem.  There are dozens of this error of 'Bad Image' messages in this forum and in the Microsoft forum.

  I think that 'Image' is the idea here, but it took me a long time to understand that.

  By a very winding road, I finished on the Intel support site (a friend suggested this).  Here, you can download a utility to update the drive, I did.  When he was executed, he informed me that he thought that I have a graphics driver of custom provider and (thank you), I would be cautious about downloading a new driver on their part.  That is why I did not.  However, that me indicated that there could be a graphic driver problem.

  Then I remembered that during my many and varied travels through the internet read something on a "Recovery Manager" that HP installs in the product (once again, thank you very much).  HP customer care has to a set of instructions on how to use the tool on their website: (using Recovery Manager to restore the software and drivers (Windows 7).

  I ran the Manager and I replaced the drive of Intel graphics.  Problem solved.

  I hope this can be useful to others.

• windows\system32\msn.dll bad image error

  Whenever I try to install a program like Winzip, a bad image.exe dll error pops up. This also happens when I try to use programs such as Windows Live Messenger or Skype. Help?

  Hello

  -You are aware of any changes made on the computer priro to this question?
   
  Run the FIXIT from Microsoft from the link below and check if the problem persists.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   
  Hope this information helps.

• The bad image error. C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Whenever I try to install the material using a USB port, I get an error from the bad image. It is said:
  C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Any help will be useful.

  Thank you
  Jeff F.

  Hi Jfog18

   

  1. what material are you trying to install?

  2 have you installed for the device that you connect software?

  3. were you able to connect the hardware device much earlier?

  
  Method 1:

  You can analyze your computer using online for computer viruses antivirus scan. Rerailway to the link below to complete the virus scan online. Check if this help -
  http://OneCare.live.com/site/en-us/default.htm

   

  Method 2:

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Bad image error C:\Windows__System32\itss.dll

  I get an error from the bad image by trying to use my drawing tools software.  It has something to do with the itss.dll.  We tried all possible options.

  Here is the error that is displayed.

  DXP.exe - Incorrect Image

  C:\Windows\System32\itss.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  Any help will be appreciated.

  Thank you

  Albert

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• TosReelTimeMonitor.exe - bad Image error

  Original title: what does this error message?  And how can I solve this problem?

  ---------------------------
  TosReelTimeMonitor.exe - Incorrect Image
  ---------------------------
  C:\windows\WinSxS\amd64_microsoft. VC90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  ---------------------------
  Ok
  ---------------------------

  Hello

  1. What is the exact full error message you get?

  2. When you encounter this error message? It does not appear when you use a particular application?

  3. have you made changes on the computer before this problem?

  Method 1:

  You can check the boot issue. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions. You can read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  It will be useful.

• "SkyDrive.exe - bad Image" Error Message box

  Whenever I boot, I get a box of titled error message: "SkyDrive.exe - bad Image" and the message reads, "C:\Users\Christopher\AppData\Local\Microsoft\SkyDrive\17.02010.0530\SyncEngine.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original excavation media or contact your system administrator or the provider of software for support. 0xc0000020 error status. "You kindly give me some pointers as precisely what to do here? Thank you!

  Hi Christophe,

  This problem may occur due to the infection by the virus or because of conflicts between the third-party applications.

  Have you done with the latest changes on the computer before this problem.

  Method 1:
  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  (1) data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  (2) the Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Method 2:
  If the problem persists, I suggest to start the computer in safe mode and check if the problem occurs or not. If the problem does not occur in mode safe run clean boot and check if it helps.

  
  Step 1:
  I suggest you to return the item and check if it helps.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Step 2:
  If the issue occur not in Mode safe run clean boot and check.

  Affecting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to get an apex_collections.clob001 text box without doing bad request error

  For my work, I need to adjust an apex page where copy us paste records to an excel file in a text box to read in the data base. The code for this works very well, except for 1 thing:

  Whenever copy us paste more records as well as the total number of characters is greater than 32767, it gives the following error:

  Bad request

  The request was not understood by the server due to invalid syntax.

  I know that I need to get the content of the textarea component in apex_collections.clob001 and I heard that I need to ajax and javascript to do, but ajax is not my area of expertise.

  Once I have the clob in apex_collections and can be read from in a package I can handle the rest. The text box is called P157_CONTENT.

  Who can explain to me how do I get the content in the text box in apex_collections.clob001?

  I finally got to work with this solution:

  Martin Giffy Souza on Oracle APEX: how send/download a CLOB from the browser at APEX via AJAX