How to get the windows disk after downloading

Similar Questions

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How to get the window slider in javafx

  How to get the window Slider in javafx when the button is clicked window slider should open with sliding effect and when we clock the button close the cursor window it should be close with effect sliding... plss send the link in this regard or if possible then plss send code. Thank you inadvance

  Look at the examples following, and if they aren't what you are looking for, please post back with a more elaborate description of your problems and a NBS of what you have tried so far (even if this does not work as you wish).

  Experiences with Java: sliding in JavaFX (It & #8217; s all about cutting)

  Example of a JavaFX component that slides in and out on command.

• How to get the windows username in jsx

  Hello

  I have a script JSX in "My Documents\Adobe Scripts" do script computer confidence. I have another text file, I need to read of JSX. Since the location depends on the user, I need to find the windows user name. If anyone knows how to get the windows of jsx username please answer.

  Thank you very much.

  Concerning

  NIMA.

  Hey,.

  You can get the username like this:

  var myUsername = $.getenv('username');
  

  You can also get the My Documents folder like this:

  var myDocFolder = Folder.myDocuments;
  

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com/

• How to get the Windows OS 8.1 actiivation key after the interview

  Dear Sir.

  My laptop has been given for maintenance on 09/06/2015 & collected on 19/08/2015. Unfortunately, while giving it for maintenance, Service Center authorized Lenovo not asked me to create a recovery media. Everything taking the delivary of the laptop service center could not activate windows 8.1 (this laptop computer OS has been pre-loaded & under warranty). Can someone tell me how to get the product activation key.

  Avinash Karnik

  Avinash-Karnik says:

  Dear Sir.

  Sorry, I fergot to quote these two motherboard have been replaced as original hard drive & motherboard had developed the fault for which I had to abandon for maintenance & replacement & maintenance for 2 & 1/2 months.

  Best regards & thanks.

  What version of Win 8.1 is the unit having now? If it's the PRO version, then probably you need to enter a product key if you reinstall. Try to download using the tool of media win 8.1 64 bit (no PRO version). Use it to install Win'a 8.1. The product key should be detected and you will not be required to enter as described above.

• How to get the Windows 7 USB/DVD download tool to recognize a file bootsect on my XP 32 bit machine, if I bought Windows 7 64 bit?

  Title says it all. I scoured the internet for an answer.

  I bought Windows 7 Professional Upgrade with the discount for students. I downloaded the file .iso image 64 bit on my account "Downloads + product keys." I also downloaded Windows 7 USB/DVD download tool to make a USB bootable for Windows 7. I ran the utility and everything worked well, but at the end of step 4, I received the message "files copied successfully. However, we were able to run bootsect to make the USB drive bootable. If you need help bootsect... blah blah blah. »

  I went looking for answers and I found the troubleshooting for the show here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool#ms_help_topics_at0
  Next to Windows 7, step 3 says "is there an"additional download options"drop-down list."
  I had that day, but then this:
  Step 4: "in the drop-down menu, select"32-bit ISO." »
  This is not possible, because I bought the 64 bit version of Windows 7. All I see are the 64-bit .iso and .exe.
  I tried searching through Microsoft answers and found that many other people had this problem. I tried all of the suggestions for workarounds in this thread. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/problem-using-Win7-usbdvd-download-tool-concerning/37eadf15-85DD-4e56-A89C-fa0a3339b92e
  The only solution I have tried was downloading the file bootsect from one source other than Microsoft.
  Is it seriously the only way to make it work? To download a BOOTSECT FILE from an UNTRUSTED SOURCE? Come on, Microsoft.

  If you purchased Windows 7 since the MS Store:

  When you create a bootable USB device, I get an error on bootsect
  To make the USB bootable, you must run a tool called bootsect.exe. In some cases, this tool must be downloaded from your Microsoft Store account. This can happen if you try to create a USB bootable 64-bit from 32-bit version of Windows. To download bootsect:

  1. Sign in to your Microsoft Store account to view your purchase history
  2. Search for your purchase of Windows 7.
  3. Next to Windows 7, there is a drop-down list "additional download options.
  4. In the drop-down menu, select "32-bit ISO."
  5. Right-click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).
  6. Once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  If you didn't buy Windows 7 since the MS Store:

  Follow these instructions to work around the bootsect error:

  a. download and install the Windows 7 USB/DVD Download Tool program, as described on theMicrosoft Store website.

  b. download a working version of 32-bit bootsect.exe . Here is a link to the 32 bit bootsect.exe:

  bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  c. Once downloaded, copy the BootSect.exe file in the same folder that contains the file ofWindows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory isC:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  d. application of the Windows 7 USB/DVD download tool as described on theMicrosoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to get the Windows Vista recovery disc

  original title: I do not HAVE MY DVD/CD for MY WINDOWS VISTA RECOVERY. WHAT SHOULD I DO? I NEED TO RE-INSTALL MY PROGRAM, BECAUSE I FORGOT MY PASSWORD OF WINDOWS LOGON. PLEASE HELP__

  NEED HELP TO PROGRAM RE-INSTALL WINDOWS VISTA. I FORGOT MY PASSWORD OF WINDOWS LOGON.

  MARITZA

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s of the recovery Partition in case of hard drive failure or System Crash, about what you are up and running again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to get the recovery disks?

  I have install disks for this program and I have no idea where to get them

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to get the Windows 7 product key?

  My friend laptop is broken and must be reformatted. It is an Acer and did not come with any CD. It doesn't have a partition on the hard drive for files to restore. I think that someone who may have removed it long ago.

  The computer came with Windows 7 preinstalled. He has a sticker at the bottom of the laptop, but the heat green product keys and other key wear is more readable.

  I have the same version of Windows, so I was going to just to use my DVD to install Windows on your computer, and then use the product key to activate it. So that Microsoft knows that it is a copy of geninue. The entire label is faded.

  I tried to find what is the product key and I'm not. I know it must be stored in the computer somewhere I need find and write it down so I can use the same product key when I reinstall Windows on his computer. I don't think that my product key will work on his computer.

  I've read online, you can get the product key from the registry, but I have no idea how to do that. I want to just make sure I can get the computer active again once that I format it.

  Thank you.

  You should be able to order from the manufacturer OEM recovery disks. (no key needed, because the OEM SLP key is incorporated)

• Re: Satellite M100-164 - how to get the recovery disk?

  Hi, I have a used Satellite M100-164. (short only model no psma0e)

  Its a M100 changed for the Middle East market as well far as I can tell its basically the same as the European models of M100, except with a smaller hard drive.

  I bought it in a store of play (Computer Exchange in London), but it did not come with a recovery disk.

  Also, I was a little too active pro removing unwanted software of the machine, so I have not installed the Toshiba tools that would be able to create a recovery disk.

  Now I need one because I want to install a bigger hard drive and then re - build the operating system (which is XP)

  * So my question is, where and how do I get a recovery for this notebook drive? *

  I tried to use https://backupmedia.toshiba.eu, but it did not work because the serial number was not recognized (probably because it is a region of the Middle East series no)

  is there another way to get the Toshiba recovery disks? I'm happy to pay a little for one.

  Hello

  In most cases it is possible to get the EPA recovery disc in your country.
  But this is not always possible if the laptop model is too old or abandoned.

  Therefore, get in touch with the ASP guy and ask for more details.
  Maybe you are a lucky man and could get this disc.

  If you will not get this disc, you will need to install the OS by using the MS XP disk.
  Pilots must be placed on the page of Toshiba Europe!

  See you soon

• Satellite A100 PSAA8C - how to get the recovery disk

  I got Toshiba Satellite A100 PSAA8C - SK800C NOTEBOOK. I had lost the product Recovery DVD-ROM of this model. I had smoker
  Save the product recovery dvd. Can U tell me how I should get the product Recovery DVD - ROM with XP Service pack 2 operating system.

  Hello

  I m not very good if you want to be able to order the recovery for this unit disc, because in very rare cases, the recovery disc may be pronounced if the laptop model is too old.

  So I hope that you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  You can also try to contact the ASP in your country and ask the guy if he could order the Toshiba disk directly

• BACKFLIP: How to clean the top toolbar after download?

  After downloading several apps to my backflip, I now have an icon for each download at the top of my screen, how do I remove these?

  -

  Slide the bottom of the toolbar and clear notifications options should appear at the top.

• How to get the windows on lenovo thinkpad x 201 product key

  Hi all
  Need help please, I used to computer laptop lenovo x 201, but the windows product key been removed sad Smiley. also the warranty has ended, so how can I get the product key? Help, please

  [Title edited for clarification]

  Hello

  Have you tried this tool? http://www.NirSoft.NET/utils/product_cd_key_viewer.html

• How to get the maximum disk size for a powershell prompt

  Hi guys

  I tried all day to get the value of the maximum disk size allocated to a virtual machine. Using get - view I can see the actual size of disc but when I look at VM via 'Edit Machine' I see ' hard disk 1' ability to 40 GB and and size maximum (GB) to 97.5 - How do I get this maximum size via powershell?

  See you soon

  Sparky

  Near there, it is actually the amount of free space on the data store over the current size of the hard drive.

  With this script, you can calculate the value

  foreach($dev in (Get-VM  | Get-View).Config.Hardware.Device){
    if($dev.DeviceInfo.Label -like "Hard Disk*"){
      $dsFree = (Get-Datastore (Get-View -Id $dev.Backing.Datastore).Info.Name).FreeSpaceMB
       $diskSize = ($dev.CapacityInKB / 1Kb)
       $MaxSize = $dsFree + $diskSize
       Write-Host "Maximum size for" $dev.DeviceInfo.Label "=" ("{0:f2}" -f (($dsFree + $disksize)/ 1Kb)) "Gb"
    }
  }
  

• How to get the Windows 8 applications and allow the modern user interface

  I was so irritated by Windows 8, I completely removed all apps and disabled 'Metro' as much as possible.

  I now need Microsoft Store to install the Windows 8.1 update.

  How can I do this without a complete reinstall?

  This should be useful for you:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  Probably the best choice would be the option refresh your PC
  You could update the system without losing your files.