How to get to multiple data acquisition voltage signals

Hi guys,.

I have to run an event for children to play with different types of energy production, so we have a wind turbine, solar panel and a generator. I have all of them connected to the ports of entry of the C USB DAQ series, I can't seem to find a way to make data acquisition out all three voltages simultaneously, the DAQ assistant in labview won't do it, AFAIK. I need all the outputs of all so that the children can see the reknewables plus and then complete the lack to win with the "power station" generator, so I need them all running at the same time. I had a quick glance at similar problems, but I don't see how they are relatable to my case.

I have attached the vi below, thanks for your help.

Amy

DAQ Assistant allows multiple entries of tension. When the analog channel selection hold down the SHIFT key and then select as many channels available, you want.

Tags: NI Software

Similar Questions

  • HOW I can install data acquisition pci & signal processing controller driver hp compaq cq60 for vista Home Basic presaro

    HOW I can install pci data acquisition & processing controller driver hp compaq presaro cq60 for vista basic reception of the signal. cause my display setting does not work pls help me

    Hi Sahnuaijaz,

    1. what happens with your display settings?

    You need to download the drivers from the HP website. You can check this link to get in touch with HP that follows:

    http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

    Hope this information is useful.

  • How to get back my data for the health and the watch Apps once I've restored my phone?

    How to get back my data for the health and the watch Apps once I've restored my phone?

    From the backup, you're going to be restoration.

    If you back up to iTunes, make sure that it is an encrypted backup.

  • My watch clock: 2012,03,2012 at 20:10. How to get back the Date please.

    My watch clock: 2012,03,2012 at 20:10.  How to get back the Date please.

    http://www.ehow.com/how_2052285_change-time-date-Windows-XP.html

    http://support.Microsoft.com/kb/307938

    UTC/GMT is 20:12 on Friday, February 24, 2012

  • How to get the last date of 3 days for the current month?

    Hello. Guy

    How to get the last date of 3 days for the current month?

    MY OUTPUT WOULD LOOK LIKE THIS

    JANUARY 29, 2016

    JANUARY 30, 2016

    JANUARY 31, 2016


    GUYS HELP ME / / /...

    SQL > select last_day (sysdate) - level + 1 double connect by level<= 3="" order="" by="">

    LAST_DAY)

    ---------

    29 JANUARY 16

    30 JANUARY 16

    31 JANUARY 16

  • PCI data acquisition and Signal controller and SM Bus controller drivers are not installed

    My laptop is Toshiba satellite L305 with Intel Pentium (R) Dual CPU T3200 2 GHz / 2 GHz.

    Rescently that he has been upgraded to Windows Vista Ultimate Edition, 32-bit operating system. Since then, my USB device wireless to connect to the internet is not worked. The Device Manager displays a yellow! Select this option for PCI Data Acquisition and Signal controller and the Bus controller. The details for the two area said that pilots are not kept.

    How can I get these drivers. I'll appreciate your help, thank you.

    Carlos

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Toshiba support at the above link

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba Driver download at the link above

    http://laptopforums.Toshiba.com/

    Toshiba laptop Forums at the link above

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Access the site of the manufacturer of your laptop to the link above > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unknown device named "PCI data acquisition" and signal processing controller in Device Manager

    Greetings,

    Yesterday, my brother, who was running Windows 8.1 Overview on his Asus S400CA Ultrabook fell on a big problem of the NTFS partition corruption that made it impossible to recover through the Refresh Utility Windows 8.1. Given the situation, my brother decided it was better to go back to Windows 8, I had to install Windows 8 on their PCs by using an external DVD drive with a Windows 8 x 64 installer I already buy plenty of detail. The computer never asked me for a product key that I have read is normal in Windows 8 PC now having these embedded in the motherboard. So far an installation smoothly, but he's going to be delicate in the part of pilot facilities. Before you remove the computer I went to the Asus website and did my best to find the specific drivers for my brother's computer and downloaded the key drivers, chipset, audio, intel graphics card, bluetooth, trackpad Wireless LAN, LAN and Asus and installed. I used Device Manager to check that the drivers have been installed and which did not exist. I was able to get most of the drivers installed properly, however, said the Device Manager miss me the pilot of "Data Acquisition and Signal Processing controller PCI. Unfortunately I go to Asus website to see that if I can find the driver however, I can't do this right now.
    Check the attached screenshots for visibility...
    I also tried to use Windows Update to see if he could find the correct driver and unfortunately it's a dead-end. Because of that I write in this forum to see if someone can point me in the right direction when it comes to this missing driver (and others) indicated in the Device Manager.
    One last thing that I would ask is if I can use a utility like DriverMax to find missing drivers or should I go and install it manually?
    Thank you very much in advance for any help on this matter.
     
    Original title: cannot find drivers for Asus S400CA Ultrabook PCI

    Hi Mike,.

    Please keep us updated on the status of the issue. Please do not hesitate to answer, in case you need help with Windows in the future.

    Good,

    ASUS technical support according to my brother was a bit of a dead end, so I went to another Google search and found the culprit. I was missing the following drivers of ASUS:
    • Intel® dynamic and thermal platform frame driver
    • ASUS Wireless remote control (a driver for you to enjoy the airplane mode (Wireless) On / Off)
    The first pilot took care of the Acquisition of ICP data and Signal Processing controller and all but one of the unknown devices. Finally, the other took care of the last unknown device in Device Manager.
    I never thought that ASUS would use this a strange name for their driver because these names are extremely misleading.
    Other than that, I can finally say with certainty that the computer of my brother is back in business, and I can call this comprehensive process of restoration of Windows 8.
    Thanks for any assistance to Zaki J, I appreciate much all advice through this process!
  • Missing PCI Data Acquisition and Signal Processing controller drivers

    Hello!

    I have a problem with my Inspiron 11 3148
    Service etiquette: CSFND32

    A few weeks ago, I did a clean reinstall of windows 8.1 using a .iso downloaded from microsoft technical support and put in level to windows 10 in a short time after.

    I don't have my thumb drive installation, where the microsoft .iso image file.

    Since then do a clean install, I had a few questions I'm going to break my best.

    1. lack of drivers for unknown devices & a PCI data acquisition and signal processing controller.

    I had some problems with wifi, so I looked in the Device Manager to check if my card needed a driver update and discovered several other device driver errors, which cannot be resolved by using windows update. The card wifi itself says it is updated.

    I tried to use the dell service detect downloaded applet on the page of the Dell driver IE, but it does not seem to function.

    If someone can identify what (s) I might need for these unknowns that would be fantastic.

    2. Wifi issues, perhaps in connection with the missing drivers above.

    -Sometimes does not detect networks.

    -Sometimes cannot connect to the internet when it is on my home network.

    -Is not able to connect to weak points where before he could.

    * Reset the network adapter in the network settings fixes detection and connectivity issues, but does not improve the detection of signals in weak points *.

    3. high (100-96%) HARD drive load for a few minutes after start high and very occasional errors "in areas not paginated page failure."

    -J' lived load disc high enough the last time I got the upgrade of 10 windows the first time, requiring often 5-10 minutes to settle at startup

    -Second time around, I always get high disk load, but it is not too long. The upgrade fee is very 'light', I have very few programs installed and even less to launch at startup.

    -Defects of Page seemed generally coincide with me shortly after you start using Google Chrome. I now use firefox instead and have known only one mistake so far since the permutation

    * I used the windows disk check and ran chkdsk /r for longer check disk to reboot, but both are no problem with the drive *.

    Ok... So usually after I finished writing this post, I came across a solution for the number one problem while browsing the microsoft answers forums.

    I downloaded and installed a driver for the Intel platform dynamic and thermal framework.
    -This solved my problems of missing driver.
    -J' rebooted several times and I am not also problems of wifi the day other than the problem of low task, but what I'll take it!

  • PCI Data Acquisition and Signal Processing controller driver

    I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.

    Can you please help?

    Thank you

    Leontina

    Hello:

    Please see if installing the Intel Chipset driver installs this device.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

  • 15 - r235ne: SM bus controller / IBD DATA Acquisition and Signal Processing controller

    Hello team

    I am facing problem in finding the right driver for material below.

    1 SM bus controller

    2 IBD DATA acquisition and Signal Processing controller

    kindly help

    concerning

    NASIR

    Hi, Nguyen:

    Download and install the Intel chipset installation utility and restart the PC.

    The 2nd driver down on the left is the automatic installation file.

    https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

  • HP laptop - 15-ac022ne: pci of data acquisition and signal processing controller

    I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...

    Please I need help...

    Hello:

    You need this driver for pci data acquisition and signal processing controller.

    FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72069.exe

  • How to get the multiple layers of data

    Hello

    I imported two jpg files into a single composition. Please follow this procedure...

    1 created a composition, say his name testCompo

    2 imported a file1.jpg in the file-> Import-> file draft

    3 imported a file2.jpg in the file-> Import-> file draft

    4. drag the two files, file1.jpg and file2.jpg, in the testCompo

    Now, I have two layers (it is file1.jpg and nested are file2.jpg) in my testCompo. How can I get the information in pixels or pixel data of the

    the two images (IE, I mean layers).

    I knew that params [0]-> u.ld is the first data layer in

    () EntryPointFunc
    PF_Cmd cmd,
    PF_InData * in_data,
    PF_OutData * out_data,.
    PF_ParamDef * params [],.
    PF_LayerDef * output,
    void * extra)

    So what about other data layer? Then, finally how can we get the multiple images/layers data in AE?

    Thanks in advance!

    It's the thing.

    You must have a param layer (let's say it's param number 3).

    Use this param to select any layer of the model.

    Now you checkout param 3.

    what you get is a paramDef structure containing the pixels of the layer 3 Advanced param to.

    you will find this information at:

    paramDef-> u.ld.data (or something close to that. I do not have in front of me)

    This way the jpg1 affect can get jpg2 pixels and jpg3. any layer in the comp.

  • How to get the contact data of old hard drive?

    A friend's mother died.  He would like to get contact details.  He says that he "kept everything in Internet Explorer." I can't understand this... was it really store in Outlook?  I got the hard drive of the machine and it attached to my laptop under drive H.  How can I recover the data?

    I would ask him what email he used; It is possible that he was using a webmail (gmail, hotmail, etc.) and has been updated and access to contacts and mail via Internet Explorer, and it don't realize may not be not that they were stored on the webmail site and were not yet on his hard drive. Another possibility is Contacts in C:\Users\username\Contacts, but that don't rely on Internet Explorer.

  • How to get the current date to display in the Spanish format.

    The coding is in format Adobe Acrobat, DC. The coding I have for the English today's date is:

    var d = new Date();

    sDate = util.printd var ("dd mmmm yyyy", d);

    this.getField("Text1").value = sDate;

    How can I get the current date displayed in this Spanish format: 07 December 2015

    Thank you

    It's a little complicated... But this code should do the trick:

    util.printd("dd", d) + " de " + util.printd("date(es){MMMM}", d, true) + " de " + util.printd("yyyy", d);
    

    Edit: Fixed the code... Did not notice the 'of' second before.

  • How to get the path data graphics (M, L, Q, etc...)?

    I have a shape on the stage and I want to get its graphics data (M, L, Q, etc), I tried the readGraphicsData method, but I could not find the data path & orders!

    var stage_shape: Shape = this.getChildAt (0) as a form;

    var v: vector. < IGraphicsData > = stage_shape.graphics.readGraphicsData (false);

    trace (v);

    output: [object GraphicsSolidFill], [GraphicsPath object], [object GraphicsEndFill]

    trace (v [1]);

    output: [object GraphicsPath]

    Then. How to get path data (178,5 M157.55 Q273.7 188.45 392,5 178,5 L392.5...)?

    Thank you.

    var stage_shape: Shape = this.getChildAt (0) as a form;

    var v: Vector. = stage_shape.graphics.readGraphicsData (false);

    trace (v);

    output: [object GraphicsSolidFill], [GraphicsPath object], [object GraphicsEndFill]

    trace (GraphicsPath(v[1]). Data);

Maybe you are looking for

  • Toshiba e-Studio 167: printing documents ODT LibreOffice 4 Linux problem

    Hello I'm trying to solve a problem when I try to print some documents ODT of LibreOffice 4 (13.04 Ubuntu operating system) on a Toshiba e-Studio 167 printer. I have not received any response from my service technical so I hope someone can help me he

  • IX2 - dl won't start

    A recently released a single 1gig WD drive my ix2 - dl and replaced with a new red WD drive to 2 giga. Original disc worked fine. New drive will not work. I find myself with a blue and red light flashing again and again. I've cleaned the disc several

  • HP 7520: Error Message: unable to connect to web services

    Since I changed my internet password, I can scan is no longer e-mail. I entered the password and allows to print very well, but can not scan to e-mail. Can someone please?

  • Failed to retrieve the installation package for light silvery in Win Server 2003

    Hello While the light silvery in Windows server 2003, installation is failed extract the installation package.  We tried to install Windows Installer 4.5 and then to "the file updatbr.inf is not valid'.»» Any solution pls?

  • New Linkys AES2500 does not connect

    I bought a wireless n adapter for my laptop and the Cisco program allows to install it does not recgoinze the device. I've tried it on 2 other computers and it worked fine (all computers running Windows 7). The USB ports work on the computer and the