How to grant relief to a battery of short duration?

Similar Questions

• Satellite C50D-A00L - battery of short duration

  Hello

  my partner has a portable Satellite C50D-A00L that was bought yesterday, the battery only last about 1.3 to 1.5 hours at most and on eco mode, which is just surfing the net.

  I have a Satellite L850 and the life of the battery last 2 - 3 times more!

  Is this good? The battery feels very light compared to the batery in my laptop

  Can I use my laptop battery in his?

  Can I buy a battery of capacity for it if so where to go? (links)

  Cheers for any info

  Hello

  As you have probably not known different laptops of different batteries.
  There are 3 cell, 6-cell, 9 cells or even 12 batteries which lasts much longer and provide more power.

  I found on the Toshiba page specs of the Satellite C50D-A00L and it looks like its battery 3 cells.
  I guess that the L850 was equipped with a stronger battery.

  > Can I use my laptop battery in his?
  Do not think to check if the battery will be compatible.

  Found a few compatible batteries for Satellite C50D series and it looks like you could use a 6 cell battery PA5024U-1BRS 4200mAh or / and PABAS260

• Re: Battery of short duration on Portege Z30-A-1E1

  Hello

  I bought the Z30 A 1e1 Portege in December, but the battery's performance seem to be reduced in just two months. Indeed, now the battery saving mode life is about 4 hours from 6: 00 to about a month ago (toshiba says until 10: 00 but 4 h mode economy seem to be less than half). In addition, battery drains very quickly when it is to the value of 20%.

  There is a problem? I need to change the battery in warranty?

  Francesco

  I can't say with certainty if your battery is malfunctioning or not because the fact is that battery working time is always based on the use of the laptop.
  Windows power options settings (CPU / GPU performance, show the level of brightness, use /SSD HARD drive, etc.) as well as applications running and aid would have an impact on battery working time.

  I guess the 10 hours of working time is the max possible value that can be reached using the maximum power saving features.
  This means that, in most cases, the working hours of battery would be lower.

  However, you should also know that the battery needs to be calibrated from time to time to keep the battery in good conditions.
  The battery should be charged and fully discharged several times in line.

  If you do not have that in the past, try it.

• How long should I charge the battery first?

  Hello!

  I would like to know how many time I charge the battery the first time...
  So, my laptop is new, but the battery's discharge after an hour, the power manager is installed...

  Site Web of Toshiba said I have work with laptop for 2 hours...

  Hello

  Battery charging time depends on the laptop model.
  But you must charge the battery until battery LED appears in green.

  Also battery life is also depends on the use of the laptop.

• Satellite P100 - 10 p: how long should I charge the battery

  Hallo,

  Today I have a new Satellite P100 - 10 p and ID like to know for how long should I charge the battery. I checked the manual and it says that I must just connect the adapter on pc and enjoy.

  Can you please tell me how long should I charge a battery for the first time.

  Thanks in advance

  Jan Birsa

  Hello

  You must charge the battery until the battery LED on the front of the laptop appears in green (or blue)!
  It s advisable to run the empty battery before you resume the second indictment.

• Satellite A200: How long can I work on battery

  Hello

  I bought new Toshiba A200-1AE with Windows Vista and I have a question I can find how long can I work on battery? Because I can not find it. Only one percent of the battery.
  Help, please.

  Hello

  It's not easy to say how long you will be able to work with the battery power.
  Battery working time depends on the use of the laptop. If you run applications of high performance such as games, video software, etc. laptop battery power down much faster!
  Why? Because all the laptop as the CPU, GPU, HDD parts, cooling modules are run with maximum efficiency. All these pieces of waste and the need of the battery power!

  Are you using XP or Vista? Vista needs much more resources than other systems operating Microsoft. It wastes more battery performance. This means that the laptop will run a lot more time with installed XP as with Vista OS by using the battery.

• MacBook Pro (retina, 13 inches, end of 2013): how to remove or install the battery

  Hi all...

  I would like to ask how to remove and install new battery making DIY and I need to prepare?

  Thank you

  Harles

  iFixit.com, great source for repairs you * can * easily *, as well as the repairs that you * can * with difficulty * also * void your warranty *.

  https://www.iFixit.com/Guide/MacBook+Pro+13-inch+retina+display+late+2013+batter y + replacement/27316

  Note that a microwave oven is involved... NO I'm not kidding!  RRSP global is 'Difficult' for the operation.

  If you have left any AppleCare, let Apple do that same removal DIY case-low gives Apple a an excuse to deny any service.

• How can I change the cmos battery in my Dell Dimension 8300

  How can I change the cmos battery in my Dell Dimension 8300?

  Thank you

  Clark

  Easy!  As long as you have a few minutes and the right replacement battery ready to go.  Just follow these few simple steps.

  1. Unplug the power cord.
  2. Tour of Lapointe on the right side.
  3. Remove the left panel - probably remove the screws at the back.
  4. Identify the CMOS battery on the motherboard.
  5. Press the metal tab to release the battery.
  6. Check the model number on the battery, make sure you have the same replacement.
  7. Install the new battery, reinstall the side panel, standing Tower and plug the power supply cord.
  8. Start the system and immediately get into the BIOS (CMOS Setup) and correct the date/time and other parameters.
  Source: mickliq at Computing.net - http://www.computing.net/answers/hardware/how-do-i-replace-cmos-battery-in-dell-desktop/73611.html
  I hope this helps!

• How will I know if my battery charged at 40-70% on my Aspire V 15?

  I have an Acer Aspire V 15.  It seems that the lithium Ion battery must be charged at 40-70% of the battery, but I don't know how to judge that?  How will I know when my battery is charged enough to remove it from the laptop?  My battery light shows blue (fully charged when the power supply cord is connected, but it turns off when I remove the power cord.)

  It is another way to check the battery level. Why people suggest to charge the battery at about 70% is simple. 100% charge level is a 'stress' of the battery keep this level of load. A lower level of load is not so stressful for the battery. But as I told you, you have nothing to indicate clearly on what level to charge your battery, at least not on laptop computers acer laptop. Some computers laptops sony had this option for implementation in their material.

• How to grant you permission to files and paths for applications and games

  How you grant permissions of files and paths for games and apps, I recently downloaded a game and can't not play due to the fact that I get a message saying that I don't have access to the file or permissions and it's my computer, if you can help that would be great

  Where are you error? By installing or playing? If its installing, check the folder where you download the game. You should have the permission that you are able to download in this folder! but you can try on this record.

• How will I know if my battery is dead, or I have a bad cord?

  My battery will not charge when plugged in the power cord. How will I know if my battery is dead, or I'm wrong cord.

  See: How to check and repair a battery discharged the laptop or netbook

• How to grant under request

  Can you please let me know how to grant under request:

  SELECT the element, dest, tlt, src_eff

  TMP_UDT_SKU-TLT4 T4

  where (item, dest, src_eff

  IN (SELECT an item, dest, MIN (src_eff)

  of TMP_UDT_SKU-TLT4

  GROUP BY article, dest)

  Note: TMP_UDT_SKU-TLT4 table contains 116852049 records.

  user9370235 wrote:

  Yes, I tried with all the queries posted by Greg, John and knani. But performance is not improved. Please, help me to tune more far.

  He should have things improved a bit - they should be scanning your table once rather than twice.

  Publish the plan of the request of John explain command.

  Also, if you have enough resource, consider using parallelism on the query.

• How to grant access to secure with sending a 1 2 areas form

  How to grant access to secure with sending a 1 2 areas form? For any help or suggestion would be appreciated.

  If you change the zone-1 ID in the form action, it will return to the page and a default logon you connected. You have access to all areas will be saved in. Technically, you can connect even with no associate also area long have you a username and password.

• How to grant full access to a schema to a user in Oracle

  For example, in MySql, I connect using my account 'Andy' to create a database ('create database BookShopping') with tables/views/functions created.
  
  Then I have just run for example ' create user Steve (Mike, Lisa, etc.) blah - blah. " "Give all the right on Steve's BookShopping (Mike, Lisa, etc.) blah - blah" to allow all developers on my team to work on this project. Any changes made by a developer is shared by the entire team. (There are a few other non-developers such as Rick QA, he is not allowed to modify the database, so I just do "grant select on BookShopping to Rick")
  
  How in Oracle? If I use my account ("Andy") to create tables/views/functions, these objects will be under my scheme, that is, with a prefix "Andy." My understanding is correct here?
  
  So, I have to create another user, called "BookShopping". After logining as 'BookShopping', how to grant full access for this scheme for all developers Steve, Mike, etc., which I am part 'Andy' so that everyone can add to new tables/procedures/triggers etc.?

  There is no subsidy, which gives all object privileges to someone else in a schema. What gives a grant is an important work, it must be done under control. Initially, it must give al grants one by one, but after that (for objects that will be created later), look at this topic:

  Re: Trigger after create schema - grants - SYS_JOURNAL

• How to grant the right to select any database to a particular user

  Hi gurus,
  
  I need to give the right to select all tables in a database to a particular user, in my opinion, there is no way to do it. Please confirm if this is possible.
  If it is not possible, so please let me know if there is any way I can grant select on all tables in a particular pattern (for example - select funding on all the tables under apps)
  
  Thank you
  Sadiq.

  I need to give the right to select all tables in a database to a particular user, in my opinion, there is no way to do it. Please confirm if this is possible.

  You can issue the command "grant select any table of .

  Alternatively, you can refer to this thread.

  How to GRANT SELECT on all tables 1 GB?
  How to GRANT SELECT on all tables 1 GB?

  If it is not possible, so please let me know if there is any way I can grant select on all tables in a particular pattern (for example - select funding on all the tables under apps)

  It is possible as shown above. If you want to grant select on the specific schema, again see the same thread and add a condition where clause in select only the tables under scheme APPS (i.e. where owner = 'APPS').

  Thank you
  Hussein