How to handle the click event of the ButtonField?

Similar Questions

• How to handle the onTriggered many ActionItem created dynamically

  Hi, I created the ActionItem dynamically using (loop)

  because data is from webservice

  How to handle the onTrigerred?

  If my code is like this:

  for (int i = 0; i)< alist.count();="">

  {

  My page page * = iRoot-->findChild ("SpecificObject");
  ActionItem * action = ActionItem::create () .title (aList [i] .name);

  bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
  Q_ASSERT (res);
  Q_UNUSED (res);

  my page-> addAction (action, ActionBarPlacement:efault);

  }

  MyClass::handleAction() Sub

  {

  aFunction(); This parameter of function required of aList, said user.user aList [i]

  }

  Do I need to create handleAction() as well as added actionItem SLOT

  But I don't know how much action added because it is dynamic server

  Thank you

  There are a few options:

  Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.

  I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.

• How to handle the case of zero insert line?

  11.2.0.2, I want to insert into a table and you want to handle the case where the zero line is inserted. I use the following code and hope an exception is caught and let me have the chance to do something

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   EXCEPTION
      WHEN NO_DATA_FOUND THEN
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND exception ' );       
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );       
  end;

  The block runs OK, but not seen release. How to handle the case of insertion of line 0?

  This will do what you want:

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   if SQL%ROWCOUNT = 0 THEN
          DBMS_OUTPUT.PUT_LINE('%rowcount must be  [' || SQL%ROWCOUNT || '].' );
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND - but won't cause an exception ' );
   END IF;
   EXCEPTION
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );
  end;
  

• How to handle the null value

  Hi all

  Can someone tell me how to handle null.

  I have a radio button, I need to capture the worth and inspiring I have a search criterion.

  If I select the radio button without problem. If I did not choose the option button it gives me the error.

  	OAMessageRadioButtonBean var1 = (OAMessageRadioButtonBean) webBean.findChildRecursive ("job");
  	If (var1! = null)
  	{
  	S1 = var1.getValue (pageContext) m:System.NET.SocketAddress.ToString ();
  	}

  Please suggest.

  Kind regards

  Sangu

  S1 = (String) var1. GetValue (PageContext);

• Inactive Contacts - how you handle the?

  We currently have XXX, XXX (there is no way I'm telling you, in fact) of contacts in Eloqua, which is not just whatever be done in a VERY long time. We have recently acquired another company who does not use Eloqua and working on their integration in our system. Now I'm sure that like Eloqua me just buy more space, I work on a project to clean up the deadbeats and leave room for shiny new customers. The program that we run has three points of contact, and if a customer engages in any of the steps they got out the program and will be left in the system. In the last step we let them know that if we do not hear back from them within 10 days, we will assume that they are super busy and we will remove them from our database. Also, we are ignoring those who joined in the last 12 months, because they can always be interested in reading some of our materials and have not gotten yet around him.

  This seems to be an Amir of a program and will surely cause our stats boost then because we send is more people that never open anything.

  How you handle these kinds of people? Do you agree with our approach?

  Absolutely!  It is a perfect process.  In my life earlier as someone who was directly in the marketing of opps, we did this process manually about every 3 months.  Automating this process with a campaign and send to the PB to automatically remove contact looks a perfect nurture automated.

  You can even include the verbiage in the last email, if they "do not" provide this mail they will be removed from the system.

• How to handle the task of automation without connection SGD-Automation

  Hello
  
  I have created an Automation task, the task performs the work, but after completing the work, I need to connect SGD-automation user and update the status of the task to move to the next step. How to avoid manual handling in the task of automation? How to do the task to go to the next manual task without connection with CMS-automation.
  
  
  Kind regards
  Marg

  In your Xquery use the syntax "context: completeTaskOnExit ($context, $exitStatus).

  Set these two variables ($context, $exitStatus) according to your required exit status.

  Hope this has helped.

  Thank you

• How to handle the OAMessageLovInputBean Action?

  Hello
  
  Can someone help me on how to manage the activity or action of OAMessageLOVInputBean?
  
  Thank you.
  
  Jon

  Jon,

  If (pageContext.isLovEvent ())
  {
  Form has been sent because the user has selected a value from the LOV modal window, either because the user tabs to the LOV of entry.
  Find out what entry LOV triggered the event.

  String lovInputSourceId = pageContext.getLovInputSourceId ();

  At this point, all data are available in the VO base, just like regular events of PPR. Call AM an method for updating application VO properties.

  If ("myLovInput".equals (lovInputSourceId))
  {
  am.invokeMethod ("handleMyLovInputEvent"); Invoking method here AM
  }
  }

  Thank you
  -Anil

• How to handle the no_data_found exception

  Hi all
  
  How to treat no_data_found exception in the procedure. I created a procedure with the cursor, the cursor loop and passing the value to the select statement (in the where clause). It works fine if the select statement returns one other wise he throws exception no_data_found, but I want to continue execution after the statement select returns no ecor. Please let me know how to handle this.
  
  
  Thank you and best regards,
  Rajasekhar

  Hello
  Assuming it's the syntax of your procedure:

  create or replace procedure XXXXXX as
  .
  .
  
  .
  .
  
  for cur_rec in 
  loop
  .
  .
  .
  
  .
  .
  .
  begin
  
  exception
  when no_data_found then
  
  end;
  .
  .
  
  .
  .
  end loop;
  .
  .
  end procedure;
  

• How to handle the larger size than the movie disc?

  I couldn't see a razor tool, or something like that in yet that I can use to cut the video if it is larger that the DVD could hold.  What could I do if I am OK to remove some content in order to fit into the drive?

  Thank you!

  How to cut the timeline?  This is the part that I don't understand.

  I don't know that you can. And if you can, I'm not saying that it is a bad idea.

  Drag the end to the beginning. This makes it shorter.

  Drag the beginning to the end; then drag the element remaining in the beginning (do not leave any space empty).

• How to remove a click event

  Hello

  I created an ID picture = "MyImage" in flex with a click event, i.e. Click = "MyFunction (e)" "

  MyFunc I want to delete or disable the click event in the handler (ActionScript). I tried

  myImage.removeEventListener ("click", myFunction, false);
  and

  myImage.removeEventListener (MouseEvent.CLICK, myFunction, true);
  myImage.removeEventListener (MouseEvent.CLICK, myFunction, false);

  myImage.click = NULL; is not allowed... ;-(

  Can you help me?

  Thank you

  TimN

  I think that the problem may be that click mxml rating makes a Manager on your behalf, and you provide the body (think anonymous function). If you provide the body of the click handler that calls your handler, but your manager isn't actually the name of the Manager click itself.

  If you want to be able to remove the service, explicitly create a Manager using addEventListener rather than the convenience of mxml mechanism, or you can also create a flag for the Manager to check to see if it needs to do something or not.

  Paul

• How to handle the "DB_EVENT_PANIC" event on the replica

  Hi experts BDB.

  I write db HA 4.6.21 the bdb version-based application. Two processes running on two machines, a master who will be read/write db, one as a desire to only read backup db. It seems backup will sometimes get 'DB_EVENT_PANIC' event for reasons that I didn't. What should I do upon receipt of these events? Should the devil out and run it then open env again for recovery? A process can reopen the environment for recovery without exit first?

  Another issue is not related to the above question: If use bdb ha (api base), can it be 3 process, termpol1 is neither master nor customer but simply write db, process2 is as master of rep that open the same env (just for ha, will not write db), process3 is the client that connects to the master to get synchronized db?

  Thank you

  Min

  I write db HA 4.6.21 the bdb version-based application. Two processes running on two machines, a master who will be read/write db, one as a desire to only read backup db. It seems backup will sometimes get 'DB_EVENT_PANIC' event for reasons that I didn't. What should I do upon receipt of these events? Should the devil out and run it then open env again for recovery? A process can reopen the environment for recovery without exit first?

  After a panic you should exit all of your process, and then run a recovery. You can run the recovery using the db_recover or by performing a DB_ENV-> open() with the DB_RECOVER flag. Refer to the reference Guide of the 'Restore Procedures' section for more details.

  Another issue is not related to the above question: If use bdb ha (api base), can it be 3 process, termpol1 is neither master nor customer but simply write db, process2 is as master of rep that open the same env (just for ha, will not write db), process3 is the client that connects to the master to get synchronized db?

  For most applications of replication, the main environment and customer environment run on the different sites/machines. It is also possible to run the main environment and environment of the client on the same machine, but there are still distinct environments with separate home directories.

  All database entries should be made on the main environment. If your termpol1 needs to use the same environment as process2. Your process2 must run first, to set up and start the environment as a master of the replication. So your termpol1 can start and perform its writings. You can start your client/process3 anytime. Refer to the reference Guide section "Building replicated applications", in particular the paragraph starting with "take the case of several process...". ', for more information.

  Paula Bingham

  Oracle

• How to handle the press event SHIFT key?

  Help me. Thank you!

  I solved the problem of my application in the other direction. Thanks BBDevelopers!

• How to handle the case end good app?

  Hello

  I'm creating an application for BB Storm2 5.0 device. I have a function to maintain a custom in app menu item native contacts, and clicking from there, brings to my screen of the application. It works very well.

  Problem occurs in the following steps:

  Steps to follow:

  1. start my native element menu contacts application, launch my app successfully screen.

  2. then if I press the red button, launching the device home screen.

  3 then run on the native Contacts application once again, throw my request directly instead of native contacts.

  Because in step 1, I launched my application screen in the menu contacts native. Because it does not have closed earlier, lance on native contacts spear my request.

  Anyone explain how can I handle this situation?

  Thank you.

  What amrishodiq said, this isn't 100% correct.  Let me correct that, then explain what you see:

  You can add the ApplicationMenuItems without even starting your Application, by doing this in the treatment of hand (.).  If your application is present or not is irrelevant.  In fact, if you add them to the start of your application, you can get several added entries, must be careful about this.

  What amrishodiq said about the red button and the usual methods of closing an Application is correct.  If you really want to exit your Application, is to call System.exit (.).  This happens automatically if you use the screen and you close the last screen in the stack to display.

  That said, you're doing something completely different here.

  You run in a Menu of Application element.  This menu item runs your code, but it is actually run by the Contact Application.  That's why, when press the red button and then relaunch the application contact, you view your screen.  If you had an icon for your Application and you have clicked on that right now, you will see a different screen.

  In this case, if your screen called System.exit (.), he was closing the Contacts Application.

  The problem of the listeners and ApplicationMenuItems running in the Application they are related is something that comes up quite often on this forum.  You really need move on to your own application and process the contact in there.  There are complications with it, make it seem easier to do what you're doing, that is just run your screens under enforcement Contacts.  However, I would recommend that you look at putting in a global events in the context of switch for your application, I think it's a better long-term solution.

• How to handle the buttons back and forward in OANavigationBarBean

  Hi all
  
  I have to get the handle of the back and buttons next to the OANavigationBarBean point. I wrote below mention code in LICS. This condition is working when I click the back and next buttons. I mean the same event is fired on the two buttons...
  
  My Requirment is that this status to success only when you click on the next button...
  
  String s1 = pageContext.getParameter ("source");
  If ("".equals (pageContext.getParameter ("event")) goto & & IrcApplyNavBean ".equals (s1)) «»
  {
  
  
  Please help me on this...
  
  
  Kind regards
  Rognard

  Hello

  You can try with the value that is to say

  String s1 = oapagecontext.getParameter ("value"); or event button can also be handle in this way

  If ("BUTTON_EVENT".equals (event))
  {
  -business logic
  }

  Including the screen, work by the way? If I access I'll check it out and tell you

  -Had

• How to handle the UAC to run the file?

  Get a weather app to run each time that the boot of win7, but it always pop up to alert security of the UAC.

  I would like to know any approach to handle this situation:

  (1) add known run the file in the lists of confidence, so he would not jump to the top once again

  (2) turn off UAC

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  There is no "trust list" for UAC because that would be a weakness that hackers could exploit immediately. You have these options:

  • Download a compatible version of Windows 7 software.
  • Ask the supplier, how it can be changed to be compatible Windows 7.
  • Turn off UAC (not recommended)