How to handle the PSE11 when I do a reinstall full of my operating system

Similar Questions

• How to create the report when your shared drive is full?

  I want to see the owner, size and date.for of the internal purposes.

  Hello

  • Work on the domain network?

  If the computer is not on the domain, you must use a third-party tool to use this feature.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to handle the case of zero insert line?

  11.2.0.2, I want to insert into a table and you want to handle the case where the zero line is inserted. I use the following code and hope an exception is caught and let me have the chance to do something

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   EXCEPTION
      WHEN NO_DATA_FOUND THEN
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND exception ' );       
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );       
  end;

  The block runs OK, but not seen release. How to handle the case of insertion of line 0?

  This will do what you want:

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   if SQL%ROWCOUNT = 0 THEN
          DBMS_OUTPUT.PUT_LINE('%rowcount must be  [' || SQL%ROWCOUNT || '].' );
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND - but won't cause an exception ' );
   END IF;
   EXCEPTION
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );
  end;
  

• My Dungeon AT100 flashing (gel) / how to enlarge the fonts when browsing

  I tried to disable my Tablet (AT100), but he keep re-reading as 'opening line of light sparkles' and then a 'flash '. He continues by doing this.

  I tried to turn if off, but I can't.

  I tried to recharge the battery, but there is nothing to change.

  I had to wait for these to be repeated until all batteries are brains.

  Why would this happen? What's wrong?

  What can I do, when this happen? Reboot? but I can't find those restart button (as these mini button that allows you to push a pencil point)

  ~*~*~*~*~*~*~*~*~*~*~*~
  How to enlarge the fonts when I'm surfing the internet?

  Thank you.

  Post edited by: ec

  Hello

  I think the sparks of light line is a background image possibly the Android system crashed I think you should start in safe mode.
  How?

  1. press the power button and quickly press and hold the Volume button down.
  2. continue to press the Volume button down until you enter secure Mode

  Now you can perform factory reset data as below:
  Tap applications > settings > privacy > data reset > Reset tablet > clear all.
  Factory data collection will be

• How to set the title when using InvokeManager (MediaPlayer)

  Hi Im using InvokeManager to play the video file (Media Player)

  How to change the title when media player to play the video (above)-> it by default uses the name of the file being played

  but I want to change this

  How to do this?

  Thank you

  Try this

  InvokeManager * invokeManager = new InvokeManager();
  InvokeRequest cardRequest;
  cardRequest.setTarget ("sys.mediaplayer.previewer");
  cardRequest.setAction ("bb.action.OPEN");
  cardRequest.setUri ("* video url *");
              QVariantMap map;
  Map.Insert ("contentTitle", "My title");
  QByteArray requestData = bb:psObject::encode (map, NULL);
  cardRequest.setData (requestData);
  Response InvokeTargetReply * = invokeManager-> invoke (cardRequest);

  Note: Mark your post as solved, if this solves your problem

• How to handle the onTriggered many ActionItem created dynamically

  Hi, I created the ActionItem dynamically using (loop)

  because data is from webservice

  How to handle the onTrigerred?

  If my code is like this:

  for (int i = 0; i)< alist.count();="">

  {

  My page page * = iRoot-->findChild ("SpecificObject");
  ActionItem * action = ActionItem::create () .title (aList [i] .name);

  bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
  Q_ASSERT (res);
  Q_UNUSED (res);

  my page-> addAction (action, ActionBarPlacement:efault);

  }

  MyClass::handleAction() Sub

  {

  aFunction(); This parameter of function required of aList, said user.user aList [i]

  }

  Do I need to create handleAction() as well as added actionItem SLOT

  But I don't know how much action added because it is dynamic server

  Thank you

  There are a few options:

  Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.

  I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.

• does anyone know how to number the photos when they are exported so someone can choose the peak of number

  Anyone know how to number the photos when they are exported from LR, so someone can choose the photo they like with a number

  Sorry took with the last answer.

  More simple form used something like-Sequence_Filename number suffix

  If an image as _ABC0987.nef will become 0001_0987.nef and 0002_0988.nef, etc.

  Ask your customer to give you the full file name. The suffix indicates the original file.

  (I hope that you only need to search in a folder and do not have a bunch of images named the same that would cause problems!)

• How to display the ToolTip when the input text is disable

  How to display the ToolTip when the input text is disable?

  Just checked in FF and IE11, works fine for me (jdev 12.1.3)

  Dario

• How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  Hi Philippe,.

  You can see the kDocBoss for the ClassID with the PMIID IID_ITRANSFORM_DOCUMENT kLocationChangedMessage.

  Markus

• Anyone know how to solve the problem, when he says scratch disk is full?

  Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/

  Go to Edition > purge > all

  This will clear all of your history and Clipboard, thus freeing the scratch disk space.

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to get the event when you click Add another button in a table.

  Hello
  How to recognize the event in processFormRequest click on the button Add another line of the footer of a table?
  
  Suppose if the ID is anotherRow (I mean ID of the button to add another line of the footer)
  
  If I give if (pageContext.getParameter ("anotherRow")! = null)... its not recognizing the event that is returning null only...
  
  I want to perform certain actions when the user clicks Add another line of footer. Please let me know the details of how identify when add another line is clicked...
  
  Thank you
  Srikanth

  Hello

  If you have only one table with add_row_button, and then copy the following code works perfectly

  If (tableBean.getName () .equals (pageContext.getParameter (SOURCE_PARAM)))
  (& ADD_ROWS_EVENT.equals (pageContext.getParameter (EVENT_PARAM)))
  {
  ...
  }

  tableBean is the Handle for your advanced table, hope, it will help you.

  Kind regards
  Out Sharma

• How to handle the no_data_found exception

  Hi all
  
  How to treat no_data_found exception in the procedure. I created a procedure with the cursor, the cursor loop and passing the value to the select statement (in the where clause). It works fine if the select statement returns one other wise he throws exception no_data_found, but I want to continue execution after the statement select returns no ecor. Please let me know how to handle this.
  
  
  Thank you and best regards,
  Rajasekhar

  Hello
  Assuming it's the syntax of your procedure:

  create or replace procedure XXXXXX as
  .
  .
  
  .
  .
  
  for cur_rec in 
  loop
  .
  .
  .
  
  .
  .
  .
  begin
  
  exception
  when no_data_found then
  
  end;
  .
  .
  
  .
  .
  end loop;
  .
  .
  end procedure;
  

• On Apple Watch, how to change the time when traveling to a different country, like London or Singapore?

  For Apple Watch, can someone please show me how to change the time on my watch when I travel to another country, like London or Singapore? Thank you.

  Hello

  When traveling to a different time zone, it is not necessary to manually change the time on Apple Watch.

  After turning off the flight on each of your iPhone and Apple Watch, the time on your watch can be updated automatically to reflect the local time.

  If it is not the case, try restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.