How to hide several overlapping with low opacity?

Similar Questions

• How to hide the overlap of lower securities with larger dimensions

  The clips I put on higher securities are smaller. That's why some of the image of the tracks less shine through. I know that I could go through the trouble of adding another track which is all black. But is there not an easier way using video effects?

  OK, I found the solution.

  You can add the "Alpha Adjust" effect to the clip.  Then select the checkbox ignore Alpha.  This causes all of the space not filled in black go. Perfect.

  Is there a way to set this as a default effect on all levels? Currently I plan simply paste the attributes of another clip 'adjusted alpha' whenever I have add - on.

• How to treat several Photos with removal of Haze Auto

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  r398tow wrote:

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  Unfortunately, you can only batch with commands in the option "treat multiple files" of the editor or the 'Export' one in the Organizer. Action would be able to combine several orders for a single file, but do not use the command given on a lot. You would need a script for this.

  The two new orders to 14 elements (haze removal and shake reduction) can be very effective, but they can also produce strange artifacts... Their use in the batch may be undesirable.

  I recommend the following solution to improve lots of files needing to increase the local contrast:

  If you work with raw files, open a small batch of files from the Organizer in the ACR module. Use the cursor to 'clarity' to all files in the batch and add some sharpness.

  If you work with JPEG files, use the editor and choose "open in camera raw" option for your batch chosen files from the file.

  Who should provide a good improvement to most of your files. You can use two new orders than in the pictures with the specific defects:

  -shake (common with telephoto lenses) removal

  -mist removal (not only haze, but images softened with "flare")

• How to hide the sidebar with other files of Notes?

  OS X El Capitan (10.11.3)

  I am trying to read a PDF Acrobat Pro and take notes with Notes in my mac, side by side.

  I would like to know how to hide the sidebar on the left of Notes, where are the names of the other file.

  I don't want the files, I already went to 'View' and you click "hide files".

  I can just see the writing of the Notes area while sharing the screen with the document I read in Acrobat Pro.

  Looks like a basic feature which Apple or Adobe Acrobat Pro should have, but I can't seem to find it.

  Looked for other solutions to the App Store, but what I've found is a bit expensive.

  I appreciate any assistance.

  I asked that your thread moved to the El Capitan forum.

• New problems to update with lower opacity effect

  Since the new update of Adobe Muse in February, I noticed that the text lower opacity on my pages do not work when I'm writing the site.

  Website: http://www.ampaevents.com/wed/about-us.html

  For example, the dreams of design should be transparent.

  I took the PNG of your page and placed it with opacity reduced on the other elements of a provision of the Muse. Everything worked well.

  Could you reduce as much as possible a single page, upload it to a provider of cloud like dropbox and post the link here?

• ADF: How to hide a table with drop-down list value change listener

  Hello
  
  IM using Jdev 11 G.
  I have a 2 tables (table1 and table2) and a list of choices. (select a choice with id soc1).
  on the evolution of the values pickist, I have to run query for table1 and table2 to hide.
  For this, I gave the partial relaxation of the tables to soc1 (id select only one option) but its not working.
  How to solve this problem?
  
  Clues?
  
  Thank you.

  After you have set the wrong table 2 visible

  this.getTable2 () .setVisible (false);

  You programatically raise the PPR on the table 2?

  Something like:

  AdfFacesContext.getCurrentInstance().addPartialTarget(this.getTable2());
  

  Arun-

• How to hide the music with iOS 10 offline?

  I would like to hide it bought songs, that I deleted in my music. This way to hide the songs offline.

  Hi HM57,.

  Thanks for your questions, but I'm not sure what you're trying to ask. I see this one of two ways. The first is that you want to hide your purchases so that you don't see them on your iPhone. The second is that you only want to see content downloaded to your iPhone. I can answer these for you two.

  To start with the first scenario, you can hide purchases from the iTunes Store. To do this, you will need to use iTunes. Access your purchased content as if you were to download it again. When you move your mouse over the content, you will see an X in the upper corner of the work. Click on that and you will see the option to hide the content you've purchased. This will ensure that when you look at your iPhone and the content is not downloaded, you will not see it.

  Take a look at the article below for more details.

  Hide and show the purchases made on the iBooks Store, App Store or iTunes Store
  https://support.Apple.com/en-us/HT201322

  For the second scenario, you can only view content downloaded to your iPhone. To accomplish this, open the music application and make sure that you are on the Library tab. You should see and option for downloaded music. Tap that and you will see the downloaded content. For reference, see the image below.

  

  Nice day

• How to get several lines with series C 9501 running with SoftMotion on a cRIO 9074 modules?

  Hello

  I'll have set up many of the variable axes defined by the user with two modules in series c 9501 running on a Compact RIO 9074 stepper.

  I started with the example of "9501 Stepper Drive (Getting Started)", which worked fine with a simple variable user defined axis (Test-interactive panel, SoftMotion functionality on the host).

  I need to control 2 axes and I could not find any help on adding a second axis, so I came up with the following approach. My approach was to expand the FPGA VI in a way to add features to the second variable axis defined by the user, so I did the following steps:

  1. Add a new variable axis defined by the user.

  2. Add the variables defined by the same user as the first axis had during the second axis.

  3. a copy of global variables that the first axis necessary to use independent global variables for the second axis.

  4. develop the FPGA VI while-loops with the circuits of same for axis 2 and ensure that the circuits for axis 2 use their own global variables, the right modules, their user-defined variables and change the index of the axis from 0 to 1 (don't know exactly how the axis index is defined).

  4B. I also tried to copy all the loops for each axis had their independent loops. Then adapt the global variables, modules, the variables defined by the user, index of the axis.

  The FPGA VI compiles and runs, but when I get to the Panel of interactive Test for both axes and try to enable them, it throws an error-70228 (Controller unable to confirm that the drive is enabled).

  I'm doing something wrong? Is it perhaps a simpler way to get two 9501 modules working with SoftMotion?

  I can provide my two examples of published projects (same loop loop / independent), if necessary.

  LabVIEW installation:

  LabVIEW 2014f1

  Module FPGA 2014

  In time real Module 2014

  SoftMotion 2014f1

  cRIO-drivers 2014f1

  Xilinx tools 14.7 2014

  I hope someone can help me, thanks in advance.

  I managed to make it work.

  I was missing that a Subvi in the FPGA VI engine control missed their axis index 0. I couldn't even they worked with an index of the axis until I looked into the block diagram of those.

  So what happened was that my routines on the second axis disabled immediately the first axis because of bad axis index.

  Definition of the index of 0 and 1 axis (axes 1 and 2) for each unique Subvi of motor control was what was missing.

• How to add several tracks with offset path?

  Hello

  I would like to create a script that can create multiple strokes with offset path (incremental or material (user will enter value))

  Is it possible to add several traces? I have found no examples in the script reference or elsewhere.

  Note: Mixtures does not give exactly the same results because sometimes especially when you are dealing with fonts outline paths is to be wrongly mixed a way.

  I'd be happy if someone give at least the main command loop.  I'll try to rest and will share here because I find the solution.

  Thank you

  Best regards.

  

  OK, I'm going to assume your sub windows through the capture in the opening screen post.

  This is a completely different approach.

  This example uses executeMenuCommand so is only compatible with CS6 +.

  and Windows is only used from VB

  //-------------------------------------------------------------------
  
  // Offset Path in apperence panel
  
  // Script by Qwertyfly
  // contact [email protected]
  // version 0.1 beta
  
  //-------------------------------------------------------------------
  
  //number of offset paths
  var Qty = 5;
  
  //amount to offset
  var Offset = -5;
  
  //units to offest in
  var Unit = "px"; 
  
  //time to wait in milliseconds before sending keys.
  // more time is slower but more stable
  // I was able to run this with it set to 0, but a little bit of a pause is a good idea.
  var wait = 10;
  
  //-------------------------------------------------------------------
  function FillDialog_Windows(distance){
      var VB = [
          'WScript.Sleep ' + wait + '',
          'Set WshShell = WScript.CreateObject("WScript.Shell")',
          'WshShell.SendKeys "' + distance + '"',
          'WshShell.SendKeys "{ENTER}"'
          ].join('\n');
      var VBgo = new File('~/go.vbs');
      VBgo.open('w');
      VBgo.write(VB);
      VBgo.close();
      VBgo.execute();
  }
  function MakeStroke(offset){
      app.executeMenuCommand('Adobe New Stroke Shortcut');
      FillDialog_Windows(offset);
      app.executeMenuCommand('Live Offset Path');
  }
  
  for(var i = 1; i		   

• How could hide several areas of text caption on multiple slides at the same time?

  I have a simulation of flash card whereupon entering the slide, you see a text box. When you click a button, the detailed answer is given below.

  I initially put in place of the slides so that the first text box is visible and the second one (the answer) is invisible, with press button giving a command to "show" the second hidden text box.

  The problem is that if a user starts again from the beginning, the responses are already showing.

  I want the slides of "reset" from the beginning so that they behave in the same way they did the first time.

  I tried the following:

  1. in the title of the 'Actions' dialog for the slide, I changed the action appropriate 'input' to hide the text box. The problem is that it sometimes takes a while to do, and you can see the answer for the blink of an eye. Not good.

  2. then, I tried an advanced action that set all the slides to hide the text box, but it only worked to the one being programmed.

  I am using Captivate v5.5.

  Any ideas or tips to solve this problem?

  Thank you!!!

  Two ideas:

  • Place a box of highest point on the upper guide layer so that it covers the areas of text for the first second or so of the slide, and then use your advanced Actions.  This means that the initial presence of flash boxes does not see because sometimes located under the highlight box.
  • Postpone your text boxes by half a second or more on the timeline.  Then during the advanced Actions work that should be hidden, the object has not yet appeared. Again not Flash.

• How to test several issues with iTunes Sub...

  I have build a Milt Iusse with iTunes subscriptions and need evidence tiles of the subscription, but they don't show up when I load the app side. Is there a How To do this somewhere?

  Support called - SOLVED.

  It wasn't a RTFM issue.

• How to hide the subform with index

  Hi all

  I have 3 subform named as:

  1 Receipt_subform [0]

  2 Receipt_subform [1]

  3 Receipt_subform [2]

  I am currently only showing Receipt_subform [0] and hide the Receipt_subform [1] and Receipt_subform [2].

  I have displayed only the Receipt_subform [1] and Receipt_subform [2] open user click on add a new function table.

  How can I view the Receipt_subform [1] and Receipt_subform [2] of javacript.

  Hi Christian,

  You can do but it will solve the nodes. That's because all three subforms have the same name "Receipt_subform". [1] is a tag indicating the instance on a zero according to the numbering system.

  If we assume that three subforms and the button are on the subform, even then the following should work (if they are not, you must include the complete reference):

  xfa.resolveNode("Receipt_subform[" + 1 + "]").presence = "visible";
  xfa.resolveNode("Receipt_subform[" + 2 + "]").presence = "visible";
  

  You could do a loop, but it hardly seems worth it for both objects.

  I would recommend having a different name for each subform, as this will make it easier to refer to each of them.

  Hope that helps,

  Niall

• How to select several values with a select statement with other columns

  Hi all

  I have a small request related to the selection of values in a table.

  create table employees (eid, ename varchar2 (20));

  insert into employee values (1, 'Nik');

  insert into employee values (2, "Prashant");

  commit;

  
  Now, I have a small list of say A, b, C, I want to choose this list with all the lines as

  with test1 as)

  Check the eid, ename for employee

  )

  Select eid, ename, 'A' col1 in test1

  UNION ALL

  Select eid, ename, 'B' col1 in test1

  UNION ALL

  Select eid, ename, 'C' col1 in test1

  but the problem with that is that in production my employee table has millions of records and it scans the employee three times table (or the number of constant values)

  Is there another way to do this.

  Thank you

  Nik

  Here is an approach with the scanning of a single table test1

  Select t.eid, t.ename, c.col1

  t test1

  Cross join (select 'A' col1 of union double all the)

  Select 'B' of all the double union

  Select the double ' C') c

• How to secure several documents with a single apply?

  How to change various PDF protection, only once file?

  Using the Action Wizard, you can process multiple files in a single operation.

• How to hide a button with javascript in Captivate 8?

  I need to run javascript in my project and at the same time I want to hide a button, so I can't use advanced actions.

  Why? You can insert the "Execute JavaScript" command in a fast action without any problem. And the same event that triggers the JS can trigger this combined action.