How to identify resource files in the cod file?

Similar Questions

• How to identify obsolete files in Windows XP?

  My directory of Windows (XP) rose to more than 10 GB, which for me is more than 30% of my C: drive.  I need to create because I only have 1 GB of free space on C:.  Despite the defrag NTFS seems to perform badly under 20% of free space.  (Yes, my documents and program files take up a lot of space, but not nearly as much as the Windows.)

  I suspect that most of the files in my Windows directory are really outdated, but I can find no documentation MS how to identify obsolete files of Windows.  Unfortunately, KB MS searches return only the details of the specific software issues and warnings no do not delete the contents of the directories like Installer & $hf_mig$ who collectively represent 40% of the space of files in the Windows folder.

  Can someone point me to MS doc on the identification of obsolete files in Windows?

  Can someone point me to a reliable freeware that can analyze my Windows folder & identify obsolete files?

  Thanks, J

  Thank you once again.

  I moved my Documents to my another internal drive, but it was UGLY.  Fortunately, I made a backup before you start.  The Windows Move function fails if a file is locked by a process.  Supposedly gives the user the possibility of closing the lock program, he abandoned the movement rather than a new attempt.  Thus, the move is only partially complete.  The restore function moves the files back, but not all the original files are retrieved.  (Move offers no option to copy all files successfully before deleting the originals).  With backup & some file/folder comparison software, I was able to recover all the lost files (probably).

  In any case, the above is not your fault.  I just thought you should know about the potential problems of moving.  I commented to MS on moving article.  I hope that similar questions are not present in Windows 7.

  I still have 26G standing on C, all Documents & settings Windows and Program Files.  But now I have 7 free G.  Move my Documents was a good idea, just as subjects with MS Move function.

  Thank you once again.  I will mark it as answered.  John

• How to identify columns that have the same data in a SQL query or function?

  Deal all,

  How to identify columns that have the same data in a SQL query or function? I have the sample data as below

  DEPT_ID

  EMP_ID

  Come on

  !CITYSTATECOUNTRY111 June 1983DELHIHUMAN RESOURCESIndia1218 January 1987DELHIHUMAN RESOURCESIndia1328 November 1985DELHIHUMAN RESOURCESIndia144 June 1985DELHIHUMAN RESOURCESIndia255 June 1983MUMBAIHDIndia266 June 1983MUMBAIHDIndia277 June 1983MUMBAIHDIndia288 Jun. 1983MUMBAIHDIndia399. June 1983GURGAONDLIndia31010 June 1983GURGAONDLIndia

  Now, I want to Indify columns that have the same data for the same Department ID.

  Is it possible in sql unique or do I have to write the function for this? Pls Help how to write?

  Thanks in advance.

  You can try this?

  WITH T1)

  DEPT_ID, EMP_ID, DATE OF BIRTH, CITY, STATE, COUNTRY

  ), ()

  SELECT 1, 1, TO_DATE('1.) June 1983', 'JJ. LUN. (YYYY'), 'DELHI', 'HR', 'INDIA' OF THE DUAL UNION ALL

  SELECT 1, 2, TO_DATE('18.) January 1987', 'JJ. LUN. (YYYY'), 'DELHI', 'HR', 'INDIA' OF THE DUAL UNION ALL

  SELECT 1, 3, TO_DATE('28.) November 1985', 'JJ. LUN. (YYYY'), 'DELHI', 'HR', 'INDIA' OF THE DUAL UNION ALL

  SELECT 1, 4, TO_DATE('4.) June 1985', 'JJ. LUN. (YYYY'), 'DELHI', 'HR', 'INDIA' OF THE DUAL UNION ALL

  SELECT 2.5, TO_DATE('5.) June 1983', 'JJ. LUN. (YYYY'), 'BOMBAY', 'HD', 'INDIA' OF THE DUAL UNION ALL

  SELECT 2.6, TO_DATE('6.) June 1983', 'JJ. LUN. (YYYY'), 'BOMBAY', 'HD', 'INDIA' OF THE DUAL UNION ALL

  SELECT 2.7, TO_DATE('7.) June 1983', 'JJ. LUN. (YYYY'), 'BOMBAY', 'HD', 'INDIA' OF THE DUAL UNION ALL

  SELECT 2.8, TO_DATE('8.) June 1983', 'JJ. LUN. (YYYY'), 'BOMBAY', 'HD', 'INDIA' OF THE DUAL UNION ALL

  SELECT 3, 9, TO_DATE('9.) June 1983', 'JJ. LUN. (YYYY'), 'GURGAON', 'DL', 'INDIA' OF THE DUAL UNION ALL

  SELECT 3.10, TO_DATE('10.) June 1983', 'JJ. LUN. (YYYY'), 'GURGAON', 'DL', 'INDIA' OF THE DOUBLE)

  SELECT DEPT_ID,

  RTRIM (XMLAGG (XMLELEMENT(A,VALS||',')). Extract ('//Text ()'), ',') COLUMNS_WITH_DUPLICATE

  DE)

  SELECT * FROM)

  SELECT DEPT_ID,

  EMP_ID,

  Date of birth

  CITY,

  STATE,

  COUNTRY

  DE)

  SELECT DEPT_ID,

  EMP_ID,

  Date of birth

  CITY,

  STATE,

  COUNTRIES,

  COUNT (*) OVER(PARTITION BY DEPT_ID ORDER BY EMP_ID DESC,DOB DESC,CITY DESC,STATE DESC, COUNTRY DESC) RN

  DE)

  SELECT DEPT_ID,

  CASE WHEN(CEID>1) AND THEN 'YES' ELSE 'NO' END AS EMP_ID.

  CASE WHEN(CDOB>1) THEN 'YES' ELSE 'NO' END AS DATE OF BIRTH,

  CASE WHEN(CCITY>1) AND THEN 'YES' ELSE 'NO' END AS CITY.

  CASE WHEN(CSTATE>1) AND THEN 'YES' ELSE 'NO' END AS STATE.

  CASE WHEN(CCOUNTRY>1) THEN 'YES' ELSE 'NO' END AS A COUNTRY

  DE)

  SELECT DISTINCT

  DEPT_ID,

  CEID,

  CDOB,

  CITY,

  CSTATE,

  CCOUNTRY

  DE)

  SELECT DEPT_ID,

  COUNT (*) TO THE CEID (DEPT_ID PARTITION, EMP_ID),.

  COUNT (*) ON CDOB (DEPT_ID SCORE, DATE OF BIRTH),

  COUNT (*) ON THE CITY (DEPT_ID PARTITION, CITY),

  COUNT (*) ON CSTATE (DEPT_ID PARTITION, STATE).

  COUNT (*) ON CCOUNTRY (DEPT_ID, COUNTRY PARTITION)

  FROM T1)))

  WHERE RN = 1)

  UNPIVOT (CLO FOR (VALS) IN (EMP_ID, DATE OF BIRTH, CITY, STATE, COUNTRY)))

  WHERE COLS = "YES".

  DEPT_ID GROUP;

  OUTPUT:

  DEPT_ID COLUMNS_WITH_DUPLICATE
  --------- ------------------------

  1 CITY, COUNTRY, STATE
  2 CITY, COUNTRY, STATE
  3 CITY, COUNTRY, STATE

  Post edited by: Parth272025

• How to use resource element in the xml file in the workflow?

  Good afternoon

  In my workflow, I put a parameter of the attribute with the element of resource type and the value of the attribute is an xml file.

  And I had a problem with xml files in my workflow, I would like to use the information in the xml file to store in the variable...

  Example: in the xml file, I put some information about the number of VLAN ID, and in my script task, I would like to know how is used with myvariable.portgroup [0].spec.vlanId?

  Best regards.

  Like this:

  var myXml = new XML(resource.getContentAsMimeAttachment().content);
  

  You can then access your nodes like this:

  myXml.node.subnode

  Google for e4X to get the syntax complete.

• How to identify my files to be copied to a new computer

  I bought a new computer, how do I identify my files on my old computer so that I can copy them to my new computer?

  First off - you did your files (hopefully) so... Where you would save them and what their name?  * smile *.

  New computer running which operating system?  Former running which operating system?

  If the news is Windows 7:
  Migrate XP to Windows 7 Easy Transfer and a USB key

  If the news is still Windows XP:
  How to use the "files and Settings Transfer Wizard" in Windows XP

  Who will have MOST of the things.  Some things refer to the joke at first.  There are really just know what you have and what you need and copy.

  Also - given the question - my suggestion is to get an external hard drive and begin to use some kind of backup as soon as POSSIBLE.

• How Referance groups paragraph Style in the Code?

  How reference to a paragraph in style Group before a paragraph style in the code? My "Heading 1" paragraph style is in a group, called "headings".

  myStyle = app.activeDocument.paragraphStyles.item("Heading 1");
  myStyle.appliedFont = "Microsoft JhengHei";
  
  

  

  Richard:

  I build a large number of files Indesign containing the tag text, and this is an example of what I am at the beginning of the line when the style is located in a group.  The style name is "AGBoldCtr" and it is located in the group "xSports."

  American League

  In the code, I create a variable for a style to a group like this:

  var PPHead = app.activeDocument.paragraphStyleGroups.item("xSports").paragraphStyles.item ("AGPPHead");

  Then, I attribute PPHead variable of a paragraph as in:

  app.activeDocument.selection [0] .paragraphs [iLoop] .appliedParagraphStyle = PPHead;      //

  Dick Conrad

• How to color or opacity when the code using the mouse?

  Hi all

  I try to adjust the color or opacity of an object only with the code, without using keyframes.

  How must enter the right code to change the opacity of an object 50% on mouseover and mouseout/mouseouthandler() 100%? It would be amazing that I could apply the same timetable for the transition.

  I tried to use:

  {- webkit - transition: opacity 0.5 ;}}

  but had no luck.

  Thanks in advance for any help!

  Eric

  You can try this for starters?

  on mouseleave

  SYM. $(«pi-001») .animate ({opacity: 1}, 1000);

  and

  on mouseenter

  SYM. $(«pi-001») .animate ({opacity: 0.5}, 1000);

• How to identify which switch in the Panel called the function?

  Here I have some 192 switches and 192 leds corresponding to each switch,

  If a switch is on(say 10th) consequence (10th) led should light up.

  I want to use the same function for all pairs of led switch.

  all I could do was to check the switch in a loop and then set the individual leads, but I find it very little effective way to do it.

  int switchOnOff (int, int int event control panel CVICALLBACK,
  void * callbackData, int eventData1, int eventData2) is the function.

  None of these arguments I can use it to extract what (the unique id for this turnout) switch called the function so that I can pass corresponding led glow?

  It occurred to me now that the table is not necessary at all: you can simply assign to each switch the corresponding ID led the callbackData, so that the code is even simpler than my previous:

  // At panel load:
  SetCtrlAttribute (panelHandle, PANEL_SWITCH1, ATTR_CALLBACK_DATA, (void *)PANEL_LED1);
  ...
  SetCtrlAttribute (panelHandle, PANEL_SWITCH192, ATTR_CALLBACK_DATA, (void *)PANEL_LED192);
  
  // In the control callback
  GetCtrlVal (panel, control, &sts);
  SetCtrlVal (panel, (int)callbackData, sts);
  

  To answer your last question, "Management Board" means immediately after the call to LoadPanel.

• How to identify objects granted to the public

  Table/view are available to identify all objects in the database that have been granted to public? Thank you

  Hello

  If you don't have privileges to see dba_tab_privs, all_tab_privs is just fine.

• How to identify a pirate on the computer?

  Original title: How can I find out what files/info (shared without permission) have been hacked by someone I know) on my computer...

  Hello. Is it possible to see a report of which files have been shared from my computer (my share permissions have been changed and I know at least one other computer that now has many of my files and folders on their system. I'd like to know how, what in particular, and who went to my information. Date and time would be fantastic and if this was done by remote access manually on my computer that would also be very useful. Ive looked a few things but his computer talking and not much. Am happy to take screenshots and download, if you could please tell me how to get to the screen that you should see. My gmail has also been copied and shared - if you could help with that too, that would be fabulous! Thanks in advance! )

  Here it is in plain English:

  Windows, by default, not "look at" what is happening on your computer in any real depth.  It records errors, warnings, and events.  He may have recorded a person changing sharing on your computer, but it would show only who was logged in when the change was made.  If you were connected, it would show that you HAVE made the changes.

  The TV shows like CSI or NCIS or law and order as showing people sitting in front of a laptop, a few keystrokes on the keyboard and then announcing "the file was acceded to 23:35 by Russian agents...". "but events like this are all made up.  Looks good on TV, not how it works in reality.

  Now yes, it IS possible to have your computer to connect as many details but you should have to bring to market the first.  You do not have... so he did not.

• How to include dynamic information in the .cod?

  We use the web application loader to distribute our application.

  If the customer has paid the application we want to pre-register so that there is no need to enter the license code itself. So, we need a method to automatically get the license code on the device of customers at load time.

  The obvious would be to have a code on the Web server change cod and insert the license string. To do this, we need to know the format .cod, but after googling the web we found some good info, but it is all fixes and patches and not officially supported by RIM.

  What is the best way (or is it still a method supported?) to include a unique license at the time of the download code?

  1. you can build your file of original/model COD with a known value for the license string/byte array. You can then search and replace this value known to the real value for the customer. Note that, if the module is signed, this would negate the signatures, which means that you will automatically re - sign.

  2. an alternative is to add the license key as a "signature" of the module. Signatures, by definition, are not covered by signatures of module. You can then use the CodeModuleManager API to get the "signature" (it's just a byte array) from your BlackBerry code. For example, add 01 00 84 00 41 42 43 44 followed by 128 bytes containing your license key. The ID of the signatory in this particular example is "ABCD" (bytes 4 to 7), but it doesn't have anything. The length of the signature (+ 4) is expressed in bytes 2 and 3 (little endian). I never tried using a length that is not 128 bytes, which is the length for the signatures of standard code.

• How to use resource files different bundle for Validator EO rules?

  Jdev 11.1.1.2.0, ADF BC.
  
  When you add a validation rule for EO or EO attribute I am able to select a resource bundle file that
  contains the text of the error message.
  Even if there is a list of choices to select this file list always contains only ONE entry.
  
  Use case:
  Many EO have the same validation rule.
  For example: the x value must be greater than zero.
  
  For the moment, I have to enter the same message for each EO (we have a bundle of files by entity and not a single model bundle).
  
  
  concerning
  Peter

  Peter,

  Go to the properties of the project. Resource group | Bundle of research and add your additional bundles to the set list.

  Then you should be able to select a bundle in the Resource Bundle combo on the dialog box Select a resource text - when adding a validation message handling failuretext.

  Kind regards

  Nick

• How can I get rid of the code 80070422 won't let me load the windows updates

  I can not load any windows updates get them all is code 80070422 and said to get help, I tried all the normal with the administrative tools, and using safe mode but nothing seems to work, please help me I have more patience

  You have disabled the BITS service, isn't the case?

  0 x 80070422

  -2147023838

  ERROR_SERVICE_ PEOPLE WITH DISABILITIES

  In almost all cases user has probably disabled the BITS incorrectly service thinking that it would improve the performance of the computer.

  https://TechNet.Microsoft.com/en-us/library/cc720432%28WS.10%29.aspx?f=255&MSPPError=-2147217396

• How to identify inactive contacts in the Eloqua database?

  We want to identify those contacts who are not active in any Email or LP.

  Hi Sheershak,

  The filter criteria use as 'not sent any Email' or 'not opened any Email. Hereby, we can identify inactive contacts of Eloqua database.

  To the landing pages, we also use same practice to find out inactive contacts.

  edynamic expert Eloqua

• How to identify a connection to the server installed as standard or replica?

  For some reason, I need to know which of my connection four server has been installed as standard on the server and other installed as replica server, but I can't find how. Need advice, thanks!

  It does not matter, the only difference between them is that they put in place a new ADAM instance or connected to one. After installation, they are exactly the same. If you really need to know (again, it is not really important), you can go \VMware VDM\ServerInstanceType HKLM\Software\VMware, Inc. (1 is the first CS, 2 replicas).