How to ignore the prompt when calling storeUserConfig()?

Similar Questions

• How to ignore the notes when calling GetWordCountInfo?

  I use ITextUtils::GetWordCountInfo, works very well except when there are notes. What should I do to ignore counting notes?

  Thank you!

  How about this:

  1. Get the thread from the first main story.
  2. Determine its limits: ITextStoryThread::GetTextStart() must return 0 and ITextStoryThread::GetTextEnd() must return the index of the end of the main thread.
  3. Call ITextUtils::GetWordCountInfo() with parameters startIndex and lengthToCount to match main thread of the history section.

  This should count the number of words in the main thread. It should not count words in headers, footers, and notes, because they are stored breast separarate son. Table cell text is also stored in separate threads, so you should probably iterate on those threads too and count their words.

• How to ignore the SOAP server called HTTP response message.

  How to terminate or skip SOAP called HTTP server response message.
  
  Hi - We have a problem with the OSB project and try to correct this.
  
  Scenario: -.
  System1 sends SOAP message to the 2 system using our service of OSB. Since we have a problem between OSB and System2 (we get the response HTTP system 500 2 code), which is causing problem with system 1.
  1-> OSB - 2 system system
  
  For some reason, System1 search failure between OSB and System2 as HTTP 500 error message and start a new attempt to traffic, which we do not really want.
  I don't want to send a message HTTP 500-System1 (as interface between the system 1 and OSB works, we issue to the next step).
  
  We tried to set the error handler to the level of the road/pipeline/service but no luck. at the level of the road, we did trigger the error response with option down too.
  
  Could someone pls try to help on this.
  
  I also have a question...
  Do we not have an option like 'Terminate' instance osb.. ? I know that this case is done with BPEL but don't see any option with OSB. Please advice.

  Here is my understanding of what you're trying to achieve:
  1 system called OSB Proxy calling 2 system via the OSb business.
  System1--> Proxy--> Business--> System2

  Is that what you want, if system 2 returns an error that you want to remove this error and return a success at system1?

  If that's what you are trying to reach then in service proxy call business service in the node of the road (or you can choose to use a legend of service in a separate step). Create a track node error handler (or a handler error step if you chose to use the legend). In this error handler any registration if you wish, and at the end of the Manager error there should be a response successfully. In this way the service will run normally when there is no error. If there is a mistake in calling system2, the stream enters the error handler where you can build any desired response (by replacing the contents of the $body) and a response successfully will forward this response as a success to vitesse1.

  However, if my understanding of your requirement is incorrect then let me know what exactly you're trying to implement.

• How to use the prompt value in the column of the report

  Hello
  
  I have a quick report column which is 'Adj Type' that contains values 10,20,30, and when the user selects Adj Type = 10, this value should be passed on to the column of the report.
  
  For example. Value in column 1 is 10 and this should multiple with the prompt value and production is expected to be 10 * 10.
  
  Ideas how to capture the prompt values in the column of the report for the calculation.

  Hi hsekar,

  (1) declare a presentation online in the section variable set Variable--> Variable--> P_var presentation

  (2) in Fx Table_name. Your_column * @{P_Var}

  @{P_var} {20} (20 is the default, it replaces when a user selects the value in the command prompt

  Thank you
  Saichand.v

• My Dungeon AT100 flashing (gel) / how to enlarge the fonts when browsing

  I tried to disable my Tablet (AT100), but he keep re-reading as 'opening line of light sparkles' and then a 'flash '. He continues by doing this.

  I tried to turn if off, but I can't.

  I tried to recharge the battery, but there is nothing to change.

  I had to wait for these to be repeated until all batteries are brains.

  Why would this happen? What's wrong?

  What can I do, when this happen? Reboot? but I can't find those restart button (as these mini button that allows you to push a pencil point)

  ~*~*~*~*~*~*~*~*~*~*~*~
  How to enlarge the fonts when I'm surfing the internet?

  Thank you.

  Post edited by: ec

  Hello

  I think the sparks of light line is a background image possibly the Android system crashed I think you should start in safe mode.
  How?

  1. press the power button and quickly press and hold the Volume button down.
  2. continue to press the Volume button down until you enter secure Mode

  Now you can perform factory reset data as below:
  Tap applications > settings > privacy > data reset > Reset tablet > clear all.
  Factory data collection will be

• How to ignore the words using keyboard shortcuts

  Using Ctrl + Rt arrow usually ignores the words when you type in a free text box but FF uses this keyboard command to scroll the tabs open. Is - this customizable?

  This has happened

  Each time Firefox opened

  is by typing in a text field

  Hi Toy4Rick,
  The keyboard to switch to the next tab shortcut is Ctrl + Tab and Ctrl + PG. FF.
  See this article for more information: hotkeys - quickly perform common Firefox tasks.

  You have all the related tabs that may cause the keyboard shortcuts change? Do you have any application for the global hotkeys etc.?

  Tell us what you find.

• How to use the node to call a library function to convert C++ source codes

  Hi all

  There are two dll name 'QMSL_WLAN_Transport.dll' and 'QCAMSL_MSVC10R.dll' and some codes c ++ to connect to the DUT. The two DLLs work together for communicaite with the DUT.

  I am confused as how to use the node to call a library function to load the 'QCAMSL_MSVC10R.dll' function as

  g_hResourceContext = QLIB_ConnectServer_UserDefinedTransport((HANDLE) USER_HANDLE,
  UserDefinedSend,
  UserDefinedReceive,
  UserDefinedFlushTxRx,
  true,
  true);
  

  It seems that 'UserDefinedReceive, UserDefinedSend, UserDefinedFlushTxRx' Processaddress?  And "UserDefinedReceive, UserDefinedSend, UserDefinedFlushTxRx"'s functions in 'QMSL_WLAN_Transport.dll '.

  UserDefinedReceive = (_UserDefinedReceive)GetProcAddress(hUDT,"UserDefinedReceive");
  UserDefinedSend = (_UserDefinedSend)GetProcAddress(hUDT,"UserDefinedSend");
  UserDefinedFlushTxRx = (_UserDefinedFlushTxRx)GetProcAddress(hUDT,"UserDefinedFlushTxRx");
  

  Attached DLLs and C++ code snippets.

  Need help.

  Thank you.

  These parameters are reminders - pointers to functions that are called by the DLL - and there is no way to duplicate this purely in LabVIEW. Search this forum for the word "recall" and you will find similar questions (for other DLLs). You will need to write your own DLL (in C, C++, etc.) that implements these functions and provides a way to transfer data to LabVIEW.

• My Acer desktop computer (approx. 1 year) ignores the key when entering. It got so bad that I am ready to t

  My Acer desktop computer (about 1 year) X1420G-U5832 ignores the letters when typing. He got one so bad that I'm ready to throw on this computer and try again. I replaced the acer with a logitech keyboard and it does the same thing. Is there a cure for this. Help, please!

  Have you tried to plug it into another USB port?

  May be a corrupted driver. Can be a good download and reinstall.

  Edit: Pilot would be looking for drivers on whatever OS you have installed the site.

• How to set the title when using InvokeManager (MediaPlayer)

  Hi Im using InvokeManager to play the video file (Media Player)

  How to change the title when media player to play the video (above)-> it by default uses the name of the file being played

  but I want to change this

  How to do this?

  Thank you

  Try this

  InvokeManager * invokeManager = new InvokeManager();
  InvokeRequest cardRequest;
  cardRequest.setTarget ("sys.mediaplayer.previewer");
  cardRequest.setAction ("bb.action.OPEN");
  cardRequest.setUri ("* video url *");
              QVariantMap map;
  Map.Insert ("contentTitle", "My title");
  QByteArray requestData = bb:psObject::encode (map, NULL);
  cardRequest.setData (requestData);
  Response InvokeTargetReply * = invokeManager-> invoke (cardRequest);

  Note: Mark your post as solved, if this solves your problem

• does anyone know how to number the photos when they are exported so someone can choose the peak of number

  Anyone know how to number the photos when they are exported from LR, so someone can choose the photo they like with a number

  Sorry took with the last answer.

  More simple form used something like-Sequence_Filename number suffix

  If an image as _ABC0987.nef will become 0001_0987.nef and 0002_0988.nef, etc.

  Ask your customer to give you the full file name. The suffix indicates the original file.

  (I hope that you only need to search in a folder and do not have a bunch of images named the same that would cause problems!)

• How to display the ToolTip when the input text is disable

  How to display the ToolTip when the input text is disable?

  Just checked in FF and IE11, works fine for me (jdev 12.1.3)

  Dario

• How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  How to generate the alert when pageitem move on the page? and what class boss be use to move pageitem

  Hi Philippe,.

  You can see the kDocBoss for the ClassID with the PMIID IID_ITRANSFORM_DOCUMENT kLocationChangedMessage.

  Markus

• Anyone know how to solve the problem, when he says scratch disk is full?

  Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/

  Go to Edition > purge > all

  This will clear all of your history and Clipboard, thus freeing the scratch disk space.

• How to keep or ignore the UUID when you power on a virtual machine

  We have a scenario where we are mirror of VMs from one site to another site for BCP which has a separate instance of the VC.

  We pre-record the virtual computers hosted NFS in virtual center.

  When we need to recover break us the mirror and power on the machine.

  VC then promp with the question, you want to keep or throw the UUID.

  How can be script as its easy to answer a few virtual machines but a pain for possibly up to a hundred?

  There are a few things to keep in mind when you want to start the guests and answer the question in this way.

  (1) the Start-VM cmdlet will wait for the prompt to start, but there is a question waiting it will never happen.

  ==> the solution is to use the Start-VM cmdlet with the parameter -RunAsync , this way the cmdlet will not wait.

  (2) when a client starts, it will take some time before the issue appears.

  ==> the solution is to wait until the question is displayed with a loop

  (3) to get the current status of the prompt, the script needs to get the VirtualMachine object with each pass through the loop.

  The properties of the $vm variable are not automatically updated unless the script retrieves the object with the cmdlet Get-View.

  (4) the purpose of the Question is present when the question is displayed. Prior to this point, this object is $null.

  ==> to avoid execution of the StartsWith method on a $null object if statement first checks to see if the object in Question is present.

  The script relies on the fact that the two conditions that are combined with - and the operator are executed from left to right.

  This is probably not a good programming practice and should be solved by using two nested If statements.

  The following script implements all the points made above.

  Note that it can only be used for the issue of msg.uuid.moved.

  The script responses with choice 2 which is the choice of 'keep '.

  $qMsgUuidMoved = "msg.uuid.moved:"
  $choiceKeep = 2
  
  $vmImpl = Get-VM "TestPC"
  $vmImpl | Start-VM -RunAsync
  
  do{
    $vm = $vmImpl | Get-View
    if($vm.Runtime.Question -ne $null -and $vm.Runtime.Question.Text.StartsWith($qMsgUuidMoved)){
      $vm.AnswerVM($vm.Runtime.Question.Id, $choiceKeep)
    }
  } until ($vm.Runtime.PowerState -ne "poweredoff")
  
  Write-Host $vm.Name "started"
  

• I used to get a pop-up when I delete a website in my favorites toolbar, which application you want to delete this file or keep it. I get no more this prompt. How to restore the prompt?

  I tried the reader flash from adobe, fix and uninstalled and installed, but it still does not work. I get a black screen for the site, but Adobe video and the sound does not work. I wish I had a fix for what is fast and then a fix for the adobe flash player.

  I expect that experts in the Adobe forums will help you solve the problem "invites".
  Have you asked this question here?

  No, I don't have an answer to this problem of "invited", but I'll try to dig up something.

  You can do a check of system files, in case you have corrupt files. Check the file system will look and fix it if possible.

  Checking file system:

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashingsfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.