Clip + microSDHC 4 GB - 16 GB - Audiobook Question

Similar Questions

• Clip + microSDHC detected not HELP!

  just bought clip + 2 GB 1 week ago. but useless 8 GB microSDHC. Sometimes the "flower" logo stuck sansa. sometimes blocked to "refreshing media." sometimes can load the player, but not content in the map.

  so I tried with a different microSD 2 GB, it's good.  I try to find solutions in the SanDisk forum, but nothing helped. I already formatted with windows 7. but cannot use cause SD Formatter, it says that the map is not supported (?). the 8 GB card can be used with my phone.

  I checked the 8 GB card with "h2testw"... It is ok

  then HOW? I think that sansa clip + got a lot of problems... If I discovered before, sure, do not buy it... = _ =

  I discovered many users clip + you have this problem w / microSD

  any way, any help or suggestion will be such wonderful service from SanDisk gurus.

  SOLVED. Rockboxed it. now it can use microsd 8 gb. Wee ~.

  ROCKBOX ROCKS!

• AudioBook question please Help

  I don't understand yet how audio books? How to put the wav. files or any other audio format in the Audiobook section? I tried to move the files to the Audiobook folder, but still see [Empty] in my rocket. But they appear always in recently added.

  what I am doing wrong?

  Yep, you will need to change the kind of audio books (capital, of ' at the end - must match what it says the "rocket") and he will put them in audiobooks.  You can put them on your card or on the internal memory.  I had one on the internal memory, but decided to use a card instead (just my preference).

• Cannot get new SanDisk Clip Sport to turn on

  I have a brand new Sport Clip... responsible for an audiobook mp3 top... He listened for 1-2 hours a night. Worked very well! Next night, I could not activate it. Heard that there is no adjustment on this Sport Clip. Connected to the computer for 2-3 hours... still nothing. Any suggestions?

  Reset is the select button / power center for 20 sec. Also plug it into USB should activate as well. If you did the zero setting and it's still not coming it would seem that it is bad and would need to be replaced.

• clip + and cd mp3

  OK you gurus, I have a problem, I have 6 mp3 disks that have the Bible on this subject, 'all inclusive '. I seem to have trouble loading on the clip +, med windows player load, so my question is? How to make them in the clip +? I tried other players, but they don't work either. Tell me if you can... .and thanks in advance-

  Load the CD Bible in the status bar of your PC and take a look at the files using Windows Explorer.  With a little luck, you can see that the editor is marked is properly the files, but the metadata tag may be in a format Windows Media Player do not like.

  The program (utility) above, MP3Tag, will be very useful.  Download and install it on your PC.

  Windows Media Player uses ID3 v2.3 ISO8859-I (Latin I) default format.  This format is also preferred by the Sansa.  Using MP3Tag, you can have a look at the incorporated into these mp3 files ID3 tags.  To work with the files on this CD, transfer a group of them to your computer for editing.  The first few may simply be transferred on the desktop, a convenient place to keep them separate.

  Mp3Tag can write new tags in the above format.  Look at one of the originals and set MP3Tag to generate the file in the format of version 2.3.  Then transfer it into your music library and see if Windows Media Player is now able to locate and read it.  The edited files can be made as a jackpot of MP3Tag.

  The Clip + can also play the file if it is in fact mp3, you won't see it on the player if the tag data is of the wrong format.  So, there is something here, go to music > follow-up through its file to the folders on the drive name to find the Bible and see if it plays.

  You will have to experiment a little, of course.  Transfer a file audio single bible to the player via drag-and-drop, using Windows Explorer.  It may be available listed as simply 'unknown' on the drive if you try to find via music > songs. The player lists the file as 'unknown', if the tag data is missing.

  As soon as you know that the file will play, it will be a matter of marking the files correctly to the location on the Clip.

  There a lot of utilities to inspect the audio file itself for its codec, or the algorithm used to compress the file.  One that comes to mind is mediainfo.  With this utility installed, the codec and other data appear as soon as the mouse is rough or via a right click on the file.

  Bob

• Clip GoList

  Hello, new to my Clip and love it!

  One question though: is it possible to add albums (or indeed artists) to the GoList instead of adding individual songs? I don't want to do it from my computer using Media Player but of the clip itself.

  Thank you very much!!

  Juanchi

  Next version will support this. Due soon.

• Sansa Clip does not pass the stage of audio books

  Dear all,

  We have the problem that our Sansa Clip will not skip chapters of audiobooks. If you hold the buttons, fast towards the front/rewinds, but if you just click on it once, nothing happens. It is only in the audio books and Podcasts, but not in music.

  However, we have already owned a Sansa Clip 8 GB, which worked very well. Then we bought a second one (also 8GB) with the problem described. The strange thing: the same audio books work very well on the other Sansa Clip (same firmware version). Also strange: jump works with music files, so it may not be a hardware failure. However, we discovered this last don't bit recently, we already have it back and got another Sansa Clip 8 GB (third). Yet once again, jump does not work. I am suspecting that something with the files is wrong, but I'm intrigued by the fact that they work very well on our first Clip. They all have the same age, our first clip is just a couple of weeks and they all came from the same supplier (Amazon), so I guess it's the same batch.

  The clues someone?

  Thank you very much
  André

  I think that you have access to the setting if you press the button in the 6 oclock position while playing an audio book. I think that there is a choice of menu for the settings of the audio book or chapter. I don't have the video right in front of me now, so I'm not sure about this.

• How can I select all clips in a large project with individually select them each clip?

  I have a large project with clips of ~ 1000 (always jpg).  My question is how can I select all the clips without individually select each clip?

  Tammy424

  What version of Premiere Elements you have and on what computer operating system is running?

  Generalize for now...

  Edit Menu/select all.

  or

  CTRL + A

  Have you tried?

  Please let us know if it works for you. If not, more details please.

  Thank you.

  RTA

• Having trouble getting first pro clips cut into compositions

  I'm working on a mashup of TV intro in the style of happy days to see the tv with another Publisher.  I'm a complete noob with sequelae.  I have never used before for anything.  The other editor has created the model in the after effects of the turntable with the player intros compositions in the center of the disk and sent the project.  He created a composition for every character intro and I'm trying to get in and replace the clips which he used as place holders with clips that I cut in first pro.

  As a first step, I managed by dragging the first pro sequence in the after effects project.  Then when I looked at the composition of the sequence, I could see the trimmed clips and could copy paste clips I wanted in their compositions respective intro.  I noticed the first time, I imported the sequence in AfterEffects and make the changes in first pro it updated in real-time.  Now all of a sudden the changes I made to the first pro sequence is more updated of sequels.  What's weird, it's update to the extent if I watch the sequence in after effects viewer I can see the changes, but on the scenario where the clips are arranged the changes are not reflected and it shows me a previous version of the sequence.

  So my two main questions are

  (1) how is the line time in legacy is no longer updated is the changes I make to the sequence in first pro?

  (2) what is the best way to get trimmed first pro clips in after effects compositions?

  Question 1:

  Since you're so new to AE, it is quite possible that a number of things that happened without realizing you it. This and you have given a lot of information for troubleshooting I mean, we don't know yet the raw versions you use, much less minor version numbers. (For example, we do not know if you use CC 2014, much less if you run the update 13.2 for AE or not.) Here is some info that we need to help: http://forums.adobe.com/thread/961743

  http://forums.Adobe.com/thread/961743

  Question 2:

  You can choose file > Import Premiere Pro Project and he'll bring the clips. It does not update, but it will give you the items you need in a way that is easier to deal with EI.

  Alternatively, you can choose to dynamically bind a first project (which resembles what you initially). In most cases, I prefer the first way.

  Since you have never used before AE, there will be a lot of things that frustrate you if you try to plow ahead without knowing the basics. I highly recommend you to go through the resources linked here: granted starting After Effects , there is a wide range of resources, but that's because EI is such a deep and complex program. Without a foundation in the basic principles, you just want to keep to be frustrated.

• CS6 actions > batch saving of images in a clipping mask problem

  Hey all,.

  Been at this for a certain brand in now and searched the www thin suggestion - so really hope someone can help me here.

  Objective:

  -Target a folder with .gif xxx patterns (in the same size)
  -Configuration of batch stocks open each image in the folder, copy the image of the model individually more to one. PSD file which have a silhouette of the handle.
  -Apply the model on the clipping mask
  -Outside save as .png

  Question:
  So far, Ive had only automate > batch to save to a .png with the pattern correctly applied to the silhouette.

  I have experince, it's so close, I have everything down and start automate > batch then Photoshop will complain of not being able to locate the clipping mask.
  In my configuration of action I everything first open my .psd containing my form of sleeve, then open a real model image and then all the other steps ending with saving the .psd with a model in .png clipping mask.

  Just to give an idea on my setup take a look here:

  http://i.imgur.com/FE8mSEU.PNG

  In this case below, I've closed everything and run Automation > lots, which gives me the error that you can see here:
  http://i.imgur.com/7Cvj26D.PNG

  Any suggestions on what I could hurt OR if I do something wrong?

  Screenshot shows an Action that works for me in a batch.

  

• Look for the clip used in the chronology of the sequence?

  Hello everyone. I'm relatively new to the Organization in recent months. This is my first post to the forums and I can't wait to share it with the community more in the future. The issue seems enough person to me, but I was surprised that I was unable to find info in these forumsor nowhere else online. I have a video montage of 2 hours, I train. I used a portion of an audio clip in my calendar sequence stick somewhere and I use the rest of the clip elsehwhere in the collage. My question is: Y at - it a way to easily search the precise locations of the element used in the timeline in the project Panel or elsewhere?

  I was magnifying the timeline sequence and scroll down to the last hour of sequences manually find where I used the clip, but there must be a better way to locate the spots in a calendar I used the clip. Anyway is to look in the timeline for specific files? I use the first Pro CS5 5.0.2 version

  MacBook Pro

  2.66 GHz Intel Core

  4 GB OF RAM

  All information about this will help a lot, she was driving me crazy not being not able to find any info on this subject last week.

  Thank you!

  Select the item in the project window.

  (Use of the clamp) open triangle next to the thumbnail at the top of the project window

  Click on the name

  CTI will jump to the item in the timeline.

• Video clip on a website...

  I have a small video clip for a website... my question is how to best present it on the Web site to know what format?
  
  QuickTime/Flash/other - I am open - I just want to get out there in most optimal way. It will be on the first page - but do not want people to get paralyzed by this download.
  
  It's for a post production house, so the quality should be decent.
  
  Any ideas?

  Fixed it... put the .flv in the top level - not in a folder and it worked fine.

• Still holding image stabilization!

  Hello world!

  So I've always used iMovie to edit and make movies.

  I am currently a video, only like duration of 3 minutes.

  My first few clips are only between 2-5 seconds each.

  The first 3 stabilized without any problem, only took a minute or two. After 3 of them stabilized well, none of my other clips will be.

  For example, this clip, I'm working with right now is only 3 seconds long and tried to stabilize for HOURS.

  I tried to restart iMovie with no result. I left it running while I went to dinner to return to stabilising. So I tried to move to some other short clips and I always use the same question. It's so frustrating!

  Please, I hope someone has an answer for me!

  Now, he has decided to work!

  Do not know how to remove this element

• Audio books, clock and folder navigation!

  Hi, I'm a big fan of audio books. All of the audio books I listen to are in MP3 format (like music).

  1. In Sansa Clip +, what is the meaning of audio books? Another format?
  2. In music mode, you can select Play All, artist, Album... and audio books - which means, books audio?
  3. If I put some audio books MP3 in the AUDIO books folder, they do not appear if I navigate by artist, for example. Why?
  4. If in my books MP3 audio, I have artist and title defined in ID3 tags, when you browse audio books option, I also don't see the artist, Title, Album and then
  5. That the link between digital audio books MP3, record BOOKS and books music audio option in the menu?
  6. How to make the player to remember the position of the MP3 book, where I left off? Can he remember position of more 1 mp3 audiobook?

  Thank you very much

  On the Clip +, a file is considered an audiobook if it is the audiobook type, or if it's in the audiobook of the Player folder. Book audio files are excluded from the database of song of the player. An audio book usually consists of several files, in order to make them appear on the drive as a single book and play in the right order, that they should have the same tag album and numbered in the order using the track number tag. When you partially play a file podcast or audio book on the Clip +, when you return to this file, you are given a choice to return to the file, or from the beginning. If you started an audiobook via music > audiobooks menu, when you return to this book with music > audiobooks menu, the player will guide you to file in which was played last. The player will do this for all the books about it.

• How to get Windows 8 to be able to play MPG or MPEG-2 video files?

  I just bought a Lenovo ThinkPad 2 with Windows 8 (not Pro).  I love the Tablet - this is really a replacement upgraded for the iPad!

  My problem is that I record videos on a Sony camcorder and they are recorded as MPG files.  When I click on the file to watch on the ThinkPad, the audio but there is no video.
  Temporarily, I've downloaded a trial version of Cyberlink PowerDVD on the Lenovo site and this allows to play video clips with audio and video.  My question is what is the alternative to Microsoft for this?  I wonder if the upgrade to Windows Pro and download the Pack Windows 8 Media Center will allow me to see the MPEG-2 audio / MPG files?

  Hello

  The short answer is Yes... except for the disks from DVD or files...

  WMP 12 them will play is more due to licensing issues, but will be Media Center.

  Activation of Media Center provide most of the codecs that he and Media Player will need.

  A problem though... I don't think you can improve win 8 Pro with the promotion you are considering... It is my belief that you must buy the Windows 8 Pro Pack.

  Take a look at this link...   http://Windows.Microsoft.com/en-us/Windows-8/feature-packs/