How to import data in Excel sheet to the database using ADF BC

Similar Questions

• How to store data instead of memoryengine to the database when using XML file

  Hi Experts,
  
  
  I doubt that in XML for transferring data from the database.
  Transfer of data from XML to the database tables will be store in memory for xml files, my goal is instead stored in the memory table engine
  is it possible to store the data in the database itself...
  I guess that when the size of the data increases say for example given huge amount, store as much data is the big issue here on the right, so to avoid this, is it possible to store
  These data directly in the database level.
  
  Please understand my requirement, either I have the explanation regarding my requirement and please help me how to do this job...
  
  
  THX,
  Sara.

  Remove the dp_doc = option Y of your url. It removes the schema whenever a new connection is created.
  If you don't want to truncate the tables, I think you should also add the option dp_tbl = N.

  Kind regards
  JeromeFr

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• How to import data from CSV file in a table using oracle forms

  Hello
  
  I have a CSV file and I want to insert in the oracle database in a table by using a button under forms of oracle.
  the user can select the CSV file by using the open dialog box.
  can someone help me find the method to import and select the client machine file?
  
  THX.

  You want to import the contents of the file or the file itself? I assume that you want to import the contents of the file. For this, there are really only two options to make an Excel (.csv) file and import into shapes; WebUtil or a JavaBean. Some examples of both:
  WebUtil: How to read an Excel file in a form of Oracle
  Oracle is CJP/BEAN - project Excel

  Try them both and see which works best for you.

  Craig...

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• Import data from Excel

  Is it possible to import data from Excel into a pdf form.

  I have some text on a form fields that need to be filled automatically.

  Thanks in advance.

  : )

  To manually import from Excel, the simplest method is to first convert a spreadsheet to a tabs-delimited text file. The first line of the sheet must be the exact field names (case matters) corresponding to the data in the following lines.

  In Acrobat 9, you can import a row of data from the file by selecting: forms > manage form data > import data...

  and select the file, then one row of data in the file.

  If you want to do it automatically or by any other non-manual method, post again and provide more information.

• Import data from Excel to ADF

  Hello world
  I need to import data from excel file that I've seen some posts as
  http://technology.AMIS.nl/Blog/8418/ADF-11g-import-from-Excel-into-an-ADF-table
  but it did not work with me.
  Thank you

  N °
  ADFDi binds ADF (web) with MS Office.
  See this demo: http://download.oracle.com/otn_hosted_doc/jdeveloper/111demos/ADFdi_Overview/Overview-ADFdi11g.html

• Import data in Excel to database table

  How to insert data from excellent to the database table?
  
  I did the following...,.
  
  2 create an HTML page with item browse file.
  3. loading of a button created.
  3. created as a result of the process to run by pressing the download button.
  
  BEGIN
  DECLARE
  v_blob_data BLOB;
  v_blob_len NUMBER;
  V_POSITION NUMBER;
  v_raw_chunk RAW (10000);
  v_char char (1);
  number of c_chunk_len: = 1;
  v_line VARCHAR2 (32767): = NULL;
  v_data_array wwv_flow_global.vc_arr2;
  number of v_rows;
  number of v_sr_no: = 1;
  v_rows_loaded NUMBER;
  
  BEGIN
  
  -Read data from wwv_flow_files
  Select blob_content from v_blob_data
  of wwv_flow_files
  where last_updated = (select max (last_updated) in the wwv_flow_files where UPDATED_BY =: APP_USER)
  and id = (select max (id) in the wwv_flow_files where updated_by =: APP_USER);
  
  
  v_blob_len: = dbms_lob.getlength (v_blob_data);
  V_POSITION: = 1;
  
  -Read and convert binary to a char
  WHILE (v_position < = v_blob_len) LOOP
  v_raw_chunk: = dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
  v_char: = chr (hex_to_decimal (rawtohex (v_raw_chunk)));
  v_line: = v_line | v_char;
  V_POSITION: = v_position + c_chunk_len;
  -When a whole line is retrieved < / span >
  IF v_char = Chr (10) THEN
  -Convert comma to: use of wwv_flow_utilities
  v_line: = REPLACE (v_line, ', ' :'); ")
  -Converting each column separated by: in the data table
  v_data_array: = wwv_flow_utilities.string_to_table (v_line);
  -REMOVE THE OLD DATA
  -Insert data into the target table
  IF v_sr_no > 1 THEN
  RUN IMMEDIATELY ' INSERT INTO EMPO(ID,EMP_ID,NAME,TYPE,JOIN_DATE,LOCATION)
  "VALUES (: 1,: 2: 3: 4: 5: 6).
  USING
  -v_sr_no,
  v_data_array (1),
  v_data_array (2),
  v_data_array (3),
  v_data_array (4),
  v_data_array (5),
  v_data_array (6).
  END IF;
  -Remove
  v_line: = NULL;
  v_sr_no: = v_sr_no + 1;
  END IF;
  END LOOP;
  
  END;
  
  END;
  
  
  
  When this procedure of irun, it shows no data found.
  Impossible to take less.

  Hello

  Try this

  BEGIN
    DECLARE
      v_blob_data BLOB;
      v_blob_len NUMBER;
      v_position NUMBER;
      v_raw_chunk RAW(10000);
      v_char      CHAR(1);
      c_chunk_len NUMBER           := 1;
      v_line      VARCHAR2 (32767) := NULL;
      v_data_array wwv_flow_global.vc_arr2;
      v_rows        NUMBER;
      v_sr_no       NUMBER := 1;
      v_rows_loaded NUMBER;
    BEGIN
  
      -- Read data from wwv_flow_files
      SELECT blob_content
      INTO v_blob_data
      FROM wwv_flow_files
      WHERE name = :Px_YOUR_ITEM
      ;
  
      v_blob_len := dbms_lob.getlength(v_blob_data);
      v_position := 1;
      -- Read and convert binary to char
      WHILE ( v_position <= v_blob_len )
      LOOP
        v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
        v_char      := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
        v_line      := v_line || v_char;
        v_position  := v_position + c_chunk_len;
        -- When a whole line is retrieved 
        IF v_char = CHR(10) THEN
          -- Convert comma to : to use wwv_flow_utilities
          v_line := REPLACE (v_line, ',', ':');
          -- Convert each column separated by : into array of data
          v_data_array := wwv_flow_utilities.string_to_table (v_line);
          --DELETE OLD DATA
  
          /* fill array if less than 6 columns */
          FOR i IN v_data_array.COUNT .. 6
          LOOP;
            v_data_array(i) := NULL;
          END LOOP;
  
          -- Insert data into target table
          IF v_sr_no >1 THEN
            EXECUTE IMMEDIATE
            'INSERT INTO EMPO(ID,EMP_ID,NAME,TYPE,JOIN_DATE,LOCATION)
            VALUES (:1, :2, :3, :4, :5, :6)'
            USING
            -- v_sr_no,
            v_data_array(1),
            v_data_array(2),
            v_data_array(3),
            v_data_array(4),
            v_data_array(5),
            v_data_array(6);
          END IF;
          -- Clear out
          v_line  := NULL;
          v_sr_no := v_sr_no + 1;
        END IF;
      END LOOP;
    END;
  END;
  

  Replace Px_YOUR_ITEM with your file browser object.

  PRECESS should insert null if there are not enough columns in your data

  Kind regards
  Jari

• Import data from a spreadsheet on the web to the Numbers worksheet

  How can I import data from a spreadsheet on the net in a Numbers spreadsheet, keeping its original format? It is not a problem when you use Microsoft Excel or OpenOffice spreadsheet and had no problem when I was with Appleworks6. When I try in number, however, the data which is along a line on the original worksheet comes to the bottom of the left column, which is completely useless.

  copy the line then pasted in numbers (command C and V command) has always worked well.

  The line of values must be copied from a continuous row of cells.

  If you provide a link to a spreadsheet, I can test it on my machine.

• Import data from different DBs to HFM Application using FDQM

  Hi gurus
  
  1. how to import data from different databases to HFM Application using FDQM?
  Do we need to write scripts for integration in FDQM, or is there an alternative method, we need to do?
  
  concerning
  Dev

  Data import is long to explain,

  To be more precise,
  1. you would establish a connection with your source systems and destination where you pull the data.
  You can do this by registering adapters of integration for send_break_action source machines
  2. you would then upward some formats for importing, maps and tables of control.
  Please go through the Administrator's guide,

  One of the experts will help you better understand.

  Kind regards

  David Martin

• How to insert data into the database using smartview

  Hello
  I am trying to insert data into the database using * "Send data" * button on the Ribbon of Essbase.
  My database is empty.
  
  I opened an ad hoc network, it returns * "#missing" * in all cells
  I have modified the cells and provided data in the cells that I want to. Now, I supported on * "Send data" * button.
  It just reloaded the adhoc grid instead of submit data, I rechecked the data through data console Administrative Service are not inserted.
  
  I am following the right way to insert data? If not, could you please suggest me how (Populate) insert default data in the database?
  
  --
  VINET

  You go about it the right way, once you have submitted if you réactualisiez then data values should be there, if you POV is against members of dynamic calc and then data not written to the database, you need to check the Member properties of your POV.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to export the database and import the database using sql developer

  Hello
  
  I need to export the database to a server and import it on another server db using the export function of database under the Tools menu in SQLl developer. How to import it? This is for Oracle database 10g.
  
  Thank you

  Hello

  I think it generates the file .sql containing all the objects that you are exported. Then you can simply open the target database file and run as a script. Also, there is another forum for sqldeveloper related issues.

  Concerning

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.