How to increase the performance of xy-graph

Similar Questions

• Re: Satellite L500-19Z - how to increase the performance of the game?

  Hey

  Basically, I have a Toshiba Satellite L500-19z, with chipsets Intel Series 4 express. I know this isn't a particularly good game, but surely the performance of game should be reasonable?

  I get 80% of the time lag - while on my old laptop (which costs no more than £200) I could play World of Warcraft on it no problem (I played the Sims3 on this laptop and had very few problems. I'm playing Dragon Age, but it is almost impossible.) My laptop is not more than 8 months old.

  I just want to know if there is a way to increase the performance of the game? I thought that maybe to connect my laptop to a PC Tower, but that could lead to the worst game performance, so I said.
  I'm sure I can't replace the graphics card, I've updated my drivers, defragment disks and so on.

  Any help is really appreciated, thanks in advance.

  Hello

  Is there anything to do to increase game performance. It depends on the graphics card and Intel cards are not designed for games, they are a good choice for mobile use because they don t need a lot of power.
  In addition, the peut t graphics card be exchanged, s thereby.

  It s always depending on the game that you can play. Therefore, check the system requirements of all the games you want to play and if your graphics card is supported. Not all games support all graphics cards.

  You must also use low graphics settings in each game. You can use the parameters of t.

  For example on my Satellite U400, possessing the same Intel graphics card, I can play Half Life 2 which has already 5 years but always low medium graphics settings.

• How to increase the performance of the computer with the first?

  I have problems with rendering long time drops latecomers / jumping and audio on complex changes with Premiere Pro cc 2014 even with active CUDA.

  I would like some advice in the adobe community for what first put on my computer for him to run more smooth with the first and the rest of Adobe programs.

  My system specs are:

  Windows 7 64 bit

  8 GB RAM

  NVIDIA GeForce GTX 550 ti GPU (drivers day)

  Intel core i5 processor clocked @ 3 .00GHz

  I was informed of some friends IT computer and some players that I would see the further performance with a better graphics card. But after the execution of the afterburner msi program to monitor the use of all during an export of a short film he showed the CPU 96-100% most of the time when the GPU only varies from 38 to 54%

  If the first is the use of CUDA, so the GPU use should not be much higher? Maybe I'm missing a setting that I need to tinker? Or do I really have to invest in a better processor?

  Thank you for all what is recommended can offer me!

  -Taylor

  There are SO many things that could in how any computer running these programs... In the "Presentation" of this forum page, note in a Panel on the right side, the "Hardware" forum... Please go ahead and ask a few questions. In addition, the Tweaker ( Page of tweakers ) Page is a vast resource of information, tests and test data.

  Basically... first thing to note is the CPU, the number of cores is cache, clock speed, then the way the motherboard integrated this into RAM, video card, & home readers (the bus system & drive connections), then the GPU and the table of drive you are using.

  -CPU: more hearts always better of course, and "virtual" cores do not count. Your i5 is a minimalist for the Adobe DVA. My i7 is a little better, but still not nearly "ideal." Mine has so-called 'eight' hearts, but four are virtual... not true. These programs will be in cloth the real parts of the processor, there is no extra wait States to charge things to put cache & back into 'virtual reality '. Clock speed is of course a biggy and not only as high as you can go, but settled at a speed that works best with the system bus & the RAM and the GPU. There are ways to understand this saying, of course. It's complicated.

  -RAM: 8 your casual work is barely enough for the operation. I'm 16, and it is nowhere near enough. 32 is pretty decent, and I drool on people with 96 + GB of RAM and a mobo which uses actually all this.

  -Mobo: the flow of the thing... and the flow over your mobo has through the system bus/s best. And such things like... how many connections drive there? You will eventually need to connect disks 6 or 8 for best performance... can you, without the data to all readers bunging autour each other on the bus to the mobo?

  -GPU/vRAM: get a hot card is cool... but ONLY if your machine can handle it. My GTX770/4 GB of vRAM is really a little overkill for my current system. Understatement. A good GPU for the use by you (it has graphics on the page of the Tweaker) with a few GB of vRAM and nuclei of a CUDA AREA traveling at a pretty decent speed when matched to the CPU/system frequencies... Yes, the good card is awesome... too card is a total waste of money, too little and you have created a choke point. GPU is only used for certain things, isn't quite the Holy Grail we often think that it is.

  -Readers: There are a LOT of read/write of data going on constantly. USB3 is NOT sufficient for reading/writing, but it can work very well for reading only, like the standard images (but not 4 k stuff). Essentially, readers must be connected to the mobo directly... and a very recommended layout is OS/programs/pagefile on a FAST SSD large (and no, they are not all the same); Another SSD for things like the previews, cache & database PrPro files and then be separate discs for the projects, footage, & exports or even better a hardware RAID 0 of 4 or 5 2 TB hard drives for files in project & footage.

  As we always say on the Page of the Tweaker, the system runs faster the point of choking more slow. You have to understand that one...

  Neil

• Increase the performance of research in the interactive report

  Hello
  
  I created a report that around 10,000 + records. To load the report, it does not have a lot of time. But when I do a search in interactive report that it takes a lot of time. Please suggest me how to increase the performance of interactive research.
  
  I use Oracle apex 3.2 and Oracle 10 g XE database.
  
  
  Please suggest me.
  
  Thank you
  Sudhir

  Antonio,

  Pagination: thank you. My concern was if pagination is in the form "x y z", where z is the total number of lines, then all lines may need to be returned to produce the total number.

  Function: Nice modular approach. As suggested above, four by rank function calls could produce a LOT of overhead in APEX (or elsewhere). A way to see if it is part of the problem, replace the code in function just a call with the code online and see if you get a large (15 to 20%) to accelerate.

  Howard

• increase the performance of the query how

  SELECT * from load_log
  where
  filetype = ' O/c '.
  AND EXISTS (SELECT view_orders FROM ' 1')
  WHERE O_ftype = ftype
  AND o_loadno = loadno - < < this line
  AND o_cocode = 1)
  
  
  HOW TO INCREASE THE PERFORMENCE OF QUERY.
  THE view_orders IS THE VIEW THAT CREATED 4 TABLES THAT HAVE SAME COLUMSN EXCEPT FTYPE
  
  
  If I remove this line very quickly run the query
  AND o_loadno = loadno - < <
  
  
  
  PLEASE GIVE ME SOME IDEAS/SUGGESTIONS.
  
  Thank you
  
  STONE ROUGH

  hard_stone wrote:
  the index of the user

  May be you want to re - edit your post: I asked the information only for the "PRT_ORDER_CONFIRM_LOAD" index, not for all indexes.

  Goes the same for the table, only for the table 'PRT_ORDER_CONFIRM '.

  This list of values without the name of the index is useless, and a line for this index should be enough.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• How to increase the video memory on Portege Z830 - 11 M?

  Hello!

  I have a Toshiba Portege Z830 - 11M. I want to increase the video memory.
  I don't know if it's possible and how to do it. I tried to open the bios by pressing the F2 key (as in the product specifications, I received with my laptop) and I arrived at the Toshiba help settings. The ESC and F1 keys open the Windows startup settings. If anyone can help me, please advice.

  Thank you very much.

  Hi Mishal

  In general the Portégé Z830 - 11 M is designed to escort us in usual daily activities such as sending mail, Office Automation and communication internet and feature thin and lightweight design allows us to take it anywhere.

  Hardware configuration has limited the performance of course, but at the same time offer excellent multitasking and long battery life. As far as I know on this machine you will not find any option to increase the performance of the GPU and everything that it works automatically.

  According to some feedback non demanding games should be playable with this graphics card too.
  I can't imagine that you want to play games with this machine so I would like to know what it is to ask about the graphics performance more.

• is it possible to use external memory to increase the performance of my computer?

  I have a slow xp and each program/app/files in an external drive.
  But I want to know if I can improve the performance of my control memory left him in the external drive.

  Hi cesar vidal,.

  1. What is the total capacity of the hard drive primary?
  2. Since when are you facing problems of performance on the computer?

  Method 1

  There is no way the use of the memory or the space left in the external drive to increase the performance of the computer.

  See the article and check if it helps increase the performance of the computer.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Method 2

  It is possible that some third-party programs installed on the computer is at the origin of the performance problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I want to increase the performance of the PC using Readyboost

  Here are my stats to computer

  Windows vista home (32-bit) sp2
  Intel Pentium Dual CPU E2160 @ 1.80 Ghz
  2 GB of RAM
  now I want to increase the performance of the pc using readyboost
  How can I do
  also how can I get the max of readyboost performance
  is there a support for an external device?
  thnx in advance
  Original title: readyboost

  Hello

  'ram 2 GB'

  You have too much RAM for Readyboost work effectively.

  ReadyBoost is designed for machines that have between 500 MB - 1 GB RAM

  The physical RAM you have installed, less you will notice an improvement using Readyboost.

  This is a very good tutorial on how to configure Readyboost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• If I activate 2 processors in msconfig, it will increase the performance of my computer... !

  If I activate 2 processors in msconfig > advanced > number of processors to 2 it will increase the performance of my computer... !

  Original title: two processors

  In most cases, you will probably have to use these options, but they can come in handy. For example, if you think that a startup problem is caused by the presence of more than one processor, you can limit the number of processors used to boot the system by activating the checkbox number of processors, and specifying a number.

  Mr President I'm on hp xw6400 workstation it has 2 processors and I use windows 10 on it, I want to run the two processors at the same time to improve performance is anyway you can tell me how...

  Hello

  Installation is possible, however, the operating system will use a processor at a single time. There are also the prerequisites if you want this kind of installation. Even if it is possible, we have no advice to use both processors at the same time, because performance will always be bottleneck depending on the hardware and the operating system you are using.

  Kind regards.

• How to improve the performance of the import

  I'm converting a database of its current WE8ISO88591 character set AL32UTF8
  I use NLS_LENGTH_SEMANTICS to TANK so I don't have to increase the length of the column.
  
  I followed the instructions in the Oracle:
  144808.1
  313175.1
  
  Except import that takes too long.
  
  I took a full database export WE8ISO8859p1 and now its importation in AL32UTF8.
  
  It is always difficult to prove slow source; but I think it has to do something with NLS_LENGTH_SEMANTICS. On the same
  Server; If the new database was in WE8ISO8859P1, a 5 million row table import took 2 hours; but in Al32UTF8 with NLS_LENGTH_SEMANTICS it takes 1 day!
  
  No idea how to improve the performance of the import.

  DOUBLE WIRE!

  Please, don't post duplicate discussions.

  Mark this thread ANSWER and continue to use your original thread where you are already helped.

  You have NOT given the info that has been ask in your other thread.
  Re: NLS_LENGTH_SEMANTICS = CHAR import is too slow

• How to increase the size of the tabs?

  http://i.imgur.com/pMYJr4r.PNG

  I've been optimizing the menu bar to save as much space as possible and I'm frankly pleased with what I got, with the exception of a fact of monkey - tabs are too small, because the space is taken by the address bar. How to increase the length of the decrease address bar bi-bouteille tab?

  Hello VladimirVilimaitis, you might try the following extension: https://addons.mozilla.org/firefox/addon/custom-tab-width/

• How to increase the size of the menu bar?

  My bar menu and all the buttons at the top suddenly, all are much smaller. Any ideas on how to increase the size of the top of the screen? IM talking not about the size of Web pages, just the menus up to the top.

  Don't want to use the menu bar and not the Firefox menu button?

  See also:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing

  You had previously placed all the items in the Menu bar?

  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar
  • Personal title bar: https://addons.mozilla.org/firefox/addon/personal-titlebar/

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the UI (toolbar).

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• RAM 1 GB upgrade will increase the performance of the Satellite Pro M30?

  My ram size is currenty 512 MB.
  I have the model Satellite Pro M30.
  As the old model, my laptop would be faster if I increase to 1 GB

  Hello

  Of course, the 1 GB of RAM would help increase the performance of your laptop.
  It must be useful for faster loading applications.
  You will notice also that your tools and other software will be faster.

  To upgrade to the 1 GB RAM, you would need two 512 MB modules.
  Usually the PC2700 DDR - RAM 512 MB module must be compatible.

  Welcome them

• Toshiba 24W1433DG - how to increase the size of the subtitles

  Good evening.

  I bought model lcd 24W1433DG I
  in trouble in subtitles divx, movies meto a pen and turn the LCD screen and all the subtitles of movies are very small and the big give computer... I went to the maximum value and the 30, but the legend is small (I mean the subtitles of attention for divx movies) would like to help

  How to increase the size of the subtitles.

  Thank you

  Message has been translated

  Hello

  As far as I know, the size of the subtitles can be increased.

• To increase the performance of the system (Windows XP, Vista, 7 and 8)

  Hi all

  Most people enjoy to keep their work in the computer and working properly, as long as possible. I have provided a few interesting documents that they will help you to keep your system as recent as possible concerning regular maintenance. I am able to provide information for systems already in Windows XP and as recent as Windows 8. What's even better is that these changes and updates can be performed without modification or upgrade any hardware.

  Increase the performance of the XP system

  Increase the Performance of the system Vista

  Increase the performance of the system 7

  Increase the performance of the system 8

  Thank you

  I hope this helps everyone.