To increase the performance of the system (Windows XP, Vista, 7 and 8)

Similar Questions

• After a crash of the system Windows, Thunderbird displays only about half of my gmail folders (labels).

  In my email account, I use a number of folders to organize my e-mail messages. After a crash of the system Windows, Thunderbird restarted, but now I see about half of my files and cannot access a large number of messages filed away. They always appear when I use my browser to access the gmail account, so the labels are still there. How can I repair damaged files thunderbird/arrangements? I use the current version (31.4.0)

  AHA! It already showed that I have subscribed to all of the folders, visible and missing, but after a combination of clicks (not sure what sequence of refreshment and subscribe and OK), they are all back.

  Thank you! Very useful.

• Download the system windows 7 64 bit repair disc

  can I use my windows HP 10 PC to download the system windows 7 64 bit repair disc. If so, HOW.

  Hello

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Orb is blocked at the start of the system on my Vista Ultimate SP2.

  Original title: Orb

  Hello

  Orb is blocked at the start of the system on my Vista Ultimate SP2, even if the box is checked in the setup of the system. What could be the reason? And there at - it a danger by unlocking it? If this is not the case, how can I put it so that it hangs every time you start?

  Thank you

  Hello
   
  1. When you say its blocked, that you get any message or it does not appear at startup?
   
  2. don't you perform a normal startup or selective startup?
   
  I suggest that you follow the steps below and check if the problem persists.
   
  Step 1:
   
  This can be caused by your security software, I would temporarily disable all security software and check if the ORB is blocked.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If it works, then give exception in Firewall setting for the program.
  Orb is a third-party application, and if trust you him, you can add as an exception.
  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  Let us know what happens in safe mode.
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on. STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  Original title: Stop: 0 x 05001210

  On a Toshiba Portege M700 with Windows XP, I get a BSOD with the following:

  STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  There is no further information on what happened, it just says: a problem has been detected and windows has shut down to prevent damage to your computer.

  I don't know any specs on the system (processor, memory, ect) I was given this laptop from edge of my guy on the ground.  I searched and I can't find any info on this Stop error message.  It was not a new hardware or software installed on the laptop recently, other than a possible update of Windows, I'm not sure.

  Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on.  I tried the Safe Mode, Mode safe mode with network and command prompt.  Each instance you get to the log in window, but when after entering my info and loggging stop immediately with the same BSOD.  I also tried the last good Config known with no luck.

  Also, the hard drive is encrypted so I can just shoot and get a backup of it before you try to reinstall the operating system.  I have not tried to repair windows, yet, I'm waiting to try other solutions if they are there.

  If anyone can point me in the right direction I would really appreciate it.  If you need any other information, just ask and I'll give you everything I can.

  Hello Jordan,.

  Have you been able to get into the recovery console?

  If so, I would recommend running the CHKDSK command of it followed by the Enter key:

  CHKDSK C:/P

  Let us know.

  Best regards

  Matthew_Ha

• Update of security continues to show the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132)

  Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).

  YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!

  Then, less than a minute later, you posted...

  Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.

  That one I'm supposed to believe?

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• Backup center and restoration', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel not responding

  Original title: clicking on but nothing happens

  When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?

  Hi Ron68PB,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open other programs?

  3. do you get error messages or error codes?

  Method 1:

  You try to run a SFC scan to check the corrupted system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Alternatively, you can try to check if the problem occurs in safe mode.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer

• On startup, I get the following message: __Error C:\WINDOWS\cleamsat.dll the specified module is not found .__I am unable to restore the system to an earlier date and now everything is real slow loading.

  If anyone can help please let me know. I had a virus recently (antivir solution pro), which is now deleted. The message appeared from this point.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Increase the system video card!

  Hey guys...

  I have a dell laptop ((E6510))

  And I have 8 GB of ram

  but in my screen resolution > avancΘs > I have only 64 Mp built in video card

  and 0 MP system video card...

  is it possible to increase the video card? or use my Rams to increase?

  There is no way to change the RAM allocation, no.  These systems come with the option of hybrid video (Intel + AMD or Intel + nVidia).  To perform this upgrade, however, the jury of the entire system must be changed, as well as the heat sink (figure $250 or more in parts + $100 in labor).

  The upgrade will void your warranty, if it is a review.

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• The card using PCI-GPIB hangs the system (Windows 7)

  Hello

  I am running Labview 11.0 (32-bit) on Windows 7 (64-bit) computer and card PCI-GPIB to communicate with instruments.

  Can I use GPIB to send commands to the device, but when I used "Measure and Automation" and analysis of the instruments he runs right first time, but if I scan again the system crashes completely (no reaction to any seizure).

  Same thing happens if I use I/O Assistant VI, I can get a response from the instrument and on the second call, the system hangs. Yet, I can send as many orders without any problem, so the source is in the reading stage.

  The PCI-GPIB card worked perfectly well for years on another computer running Windows XP.

  Someone already had this problem and what can be the source of it?

  I had a similar problem, but I just found out that the motherboard was not good...

  Try in another computer... Optionally, you can uninstall and install back the NI 488 drivers. 2...

  -Germain

• Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit

  I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.

  Today, I upgraded my computer to Windows 7 Home Premium 64-bit
  Now - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.
  I would appreciate your help on this.

  Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.

  Thanks for your help, anyway.

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.